Cadillac XT4 Owner's Manual page 233

232 DRIVING AND OPERATING
: Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ : Press briefly to resume the
previous set speed or to increase
vehicle speed if ACC is already
activated. To increase speed by
1 km/h (1 mph), press RES+ to the
first detent. To increase speed to the
next 5 km/h (5 mph) mark on the
speedometer, press RES+ to the
second detent.
SET : Press briefly to set the speed
and activate ACC or to decrease
vehicle speed if ACC is already
activated. To decrease speed by
1 km/h (1 mph), press SET to the
first detent. To decrease speed to the
next 5 km/h (5 mph) mark on the
speedometer, press SET to the
second detent.
: Press to disengage ACC without
erasing the selected set speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
Switching Between ACC and
Regular Cruise Control
To switch between ACC and regular
cruise control, press and hold
A Driver Information Display (DIC)
message displays. See Vehicle Messages
0 120.
ACC Indicator Regular Cruise
Control Indicator
When ACC is engaged, a green
indicator will be lit on the instrument
cluster and the following gap will be
displayed. When the regular cruise
control is engaged, a green
indicator will be lit on the instrument
cluster; the following gap will not
display.
When the vehicle is turned on, the
cruise control mode will be set to the
last mode used before the vehicle was
turned off.
Switching from ACC to regular cruise
control is only recommended when
.
there are no vehicles ahead of your
vehicle.
Warning
Always check the cruise control
indicator on the instrument cluster
to determine which mode cruise
control is in before using the
feature. If ACC is not active, the
vehicle will not automatically brake
for other vehicles, which could