Usb Connection Mode; Network - LG KU380 User Manual

Settings
- Restore
The server sends all its data from a
database to the phone. The phone
is expected to replace all data in
the target database with the server
sent by the server. This means the
server overwrites all data in the
phone database.
]
Access point: Select an access
point to use for the data
connection.
]
Sync mode: Select the
synchronization mode below.
- Manual
The synchronisation will only occur
when explicitly initiated by the
user.
- Automatic
The application will automatically
initiate a sync, based on the
preferences defined (either a
regular reminder or after changes
have been made.)
- Sync frequency
Select the automaic sync
preference when you choose
automatic sync mode.
68

USB connection mode

You can activate USB connecton mode
of your phone for serveral usages.
If you use Mass storage function like
USB memory card, select Mass storage
in this menu. Mass storage is available
for only external memory card.
If you use Data service such as PC suite
application, select Data service in this
menu.

Network

Select Network
Select between Automatic and
Manual.
]
Automatic: Automatically searches
for the network and registers the
handset to the network. This is
recommended for best service and
quality.
]
Manual: All the currently 2G(GSM)
and 3G(UMTS) available networks
are shown and you can select one of
them for registration. If the
registration of the network has failed,
the network lists are listed again and
you can select any other one for
registration.
(Menu 7.6.3)
(Menu 7.6.4)