Usb Connection Mode - LG KE590 User Manual

- Primary/Second DNS
<GPRS settings>
The service settings are only
available when GPRS is chosen as a
bearer service.
- APN: Input the APN of the GPRS.
- User ID: The user identity for your
APN server.
- Password: The password required
by your APN server.
- Primary DNS: Input the IP address
of the primary DNS server you
access.
- Second DNS: Input the IP address
of the secondary DNS server you
access.
v
Delete: Deletes the selected
profile from the list.
v
Reset all: You can reset all the
profiles.

USB connection mode

9.4.3)
You can choose one mode out of
Data service and USB Mass storage.
v
USB Mass storage
You can connect your phone to your
PC, as a USB storage device, using
the cable in three ways.
1. Connect the phone to the PC
when the idle(or Top menu) screen
is displayed.
2. Connect the phone while it is
performing an operation or menu
function, and then move to the
idle(or Top menu) screen.
3. You can connect your phone to
your PC, as a USB storage device.
When you have finished using the
phone memory, take the following
steps.
Warning!
Before you remove the cable, it is
necessary to follow the steps or, the
integrity of transferred data is not
guaranteed.
1. Click on the notification area.
[Unplug or Eject Hardware]
(Menu
2. Select USB mass Storage Device,
click on Stop. The following
message will appear: The 'USB
mass Storage Device' , device can
now be safely removed from the
system.
59