Features Of The Product - Schenker SMART 60 Installation, Use And Maintenance Manual

3 – PRODUCT PRESENTATION
PUMP
Dimensions
Length:
Width:
Height:
Weight:
Hydraulic Connection
Water inlet:
Water outlet:
Feed pump type:
Filters:
Power supply:
Average electric consumption:
Nominal fresh water production: 60 Lit/h +/- 20% @ seawater 25 °C salinity 35.000 ppm
CEE conformity:

3.6 Features of the product

The fresh water produced by a Schenker watermaker, obtained by clean seawater, has a high purity. Despite
this, the potability may not be guaranteed: bacterium caused by non-observance of shutdown and cleaning
procedures may be present in the watermaker. Therefore, it is essential that the correct shut down and storage
procedures are followed to ensure continued purity of the fresh water. UV treatment of the fresh water may
well be beneficial
THE PRESENT MANUAL BELONGS TO -
44 cm
23 cm
29 cm
10 Kg
¾'' fitting, 16mm internal diameter reinforced hose.
¾'' fitting, 16mm internal diameter reinforced hose.
Shurflo diaphragm pump
n. 1 Cartridge filter 5 microns 2.32" x 9 ¾''
n. 1 Active carbon filter 2.32" x 9 ¾''
12 VDC +/- 15% (60S12 version)
24 VDC +/- 15% (60S24 version)
250 Watt/h average
In compliance with directives 89/392 CEE sect.1 (general safety machines
requirements), 89/336 CEE (electromagnetic compatibility), 73/23 CEE
(electric safety requirements)
Schenker Italia
12
COD: 60S12/24.B.2021
- ALL RIGHTS RESERVED
EN