Table of Contents
Advertisement
2-2. Connecting the Signal Cable
NOTE
Be sure that the power switches of both the PC and the monitor are OFF.
1.
Plug the signal cable into the connector at the rear of the monitor
and the other end of the cable into the video connector on the PC.
After connecting, secure the connection with the screw-in fasteners.
Signal Cable
Signal Cable (enclosed)
Signal Cable (enclosed) +
Macintosh Adapter (Optional)
Power Cord
Connector of the PC
Video Output Connector /
D-Sub mini 15 pin
Video Output Connector /
D-Sub mini 15 pin
PC
Standard graphics card
Power Macintosh G3
(Blue & White) / Power
Mac G4 (VGA)
Macintosh
2. CABLE CONNECTION
English
13
Advertisement
Table of Contents
