Table of Contents
Advertisement
English
5.
ATTACHING AN ARM STAND
The LCD monitor can be used with an optional arm stand.
Using our optional arm or stand is recommended. (Ask your local dealer for
information.)
NOTE
If you will use the arm or stand of other manufacturers, confirm the followings to
the manufacturers before selecting.
– Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
– Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
– TÜV/GS approved arm or stand
Please connect cables after attaching an arm stand.
Setup Procedure
1.
Hold the lower part of the stand cover and remove by lifting it up.
2.
Lay the LCD monitor down. Do not scratch the panel.
3.
Remove the tilt stand by loosing the screws (4 pcs).
22
5. ATTACHING AN ARM STAND
Stand Cover
Advertisement
Table of Contents
