Table of Contents
Advertisement
English
4.
ADJUSTMENT
Adjust the screen by refering from "4-1. Auto Screen Adjustment" to "4-
4. Color Adjustment".
4-1. Auto Screen Adjustment
Screen flickering is suppressed and the proper position is adjusted automatically in the
following cases.
When the monitor is input the input signal from the computer that has never been
connected the monitor.
Changing the monitor's resolution or refresh rate
When the screen is flicking or the position is not proper.
[Procedure]
(1)
Select <Auto Adjustment> in the ScreenManager .
(2)
Select <Screen> in the sub menu and press the Enter button. The message "Auto
in progress" is displayed and screen flickering is suppressed and the proper
position is adjusted.
NOTE
The screen vibrates slightly about 5 seconds during the Auto screen adjustment,
but it will return to normal after adjustment.
The Auto sizing function is intended for use on the Macintosh and on AT-
compatible PC running Windows. It may not work properly in either of the
following cases.
When running an AT-compatible PC on MS-DOS (Not windows). The
background color for the "wall paper" or "desktop" pattern is set to black.
If the appropriate screen cannot be made by using the Auto Screen Adjustment,
adjust the screen through the Screen adjustment program. It can be downloaded
from the EIZO homepage (http://www.eizo.com/).
4-2. Range Adjustment
Please be sure to follow the following procedure to display the whole color gradation
(256 colors).
[Procedure]
(1)
Select <Auto Adjustment> in the ScreenManager.
(2)
Select <Range> in the sub menu and press the Enter button.
(3)
The screen blanks for a moment and adjusts the color range to display the
whole color gradation of the current output signal.
18
4. ADJUSTMENT
(p. 30)
Advertisement
Table of Contents
