Please keep all documents for future reference and pass these documents on, together with the product, to any future owner. See steamfast.com to view, download and print the most current version of these instructions. INTENDED USE: This product is intended to be used indoors for ironing and garment steaming in the United States.
Page 3
product upside down to empty the reservoir. - To reduce the risk of contact with hot water, test whether steam is ready before each use while carefully holding the product away from your body. If no steam appears, wait a few more minutes and test again.
Page 4
unit is not operating normally. Immediately unplug and have unit serviced by qualified service personnel. - When filling Water Tank, only water should be used in unit - other cleaning agents could damage unit or cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize potential build-up of mineral deposits.
Page 5
- This appliance has a polarized plug (one blade is wider than the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Product Information UNIT FEATURES & ACCESSORIES Ironing Plate Main Body Heating Indicator Light Water Tank Cap Water Tank View Window Water Tank Continuous Steam Switch Temperature Control Dial Steam Burst Button Handle Handle Collapse Lever Fill Cup 6 | ENGLISH...
Page 7
1. The Ironing Plate is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases. 2. The Main Body contains the unit’s internal heating components 3. The Heating Indicator Light illuminates when the Ironing Plate is heating.
Page 8
Using the Mini Steam Iron FILLING WATER TANK (FOR STEAM IRONING) 1. Turn off and unplug unit. 2. Place unit on a flat surface and stand the iron upright. 3. Fill the Fill Cup with up to 1.00 oz (29.5mL) of water. Do not fill the Fill Cup to the MAX fill line.
OPERATING UNIT CAUTION: Do not operate when handle is in collapsed position. STEAM IRONING 1. Follow Filling Water Tank procedure on pg 6. 2. Plug power cord into a convenient electrical outlet. 3. Turn Temperature Control Dial to your desired ironing plate heat setting.
DRY IRONING IMPORTANT: Make sure Continuous Steam Switch is in the position to avoid water leakage. 1. Plug power cord into a convenient electrical outlet. 2. Turn Temperature Control Dial to desired ironing plate setting. The desired setting should align with the Heating Indicator Light. NOTE: It is recommended to start with lower temperatures first, as high settings designed for heavy materials can damage delicate fabrics.
Storage & Care CLEANING & STORAGE 1. Turn Temperature Control Dial to OFF position. Unplug power cord. 2. Place unit upright to allow Ironing Plate to cool for at least 30 minutes. 3. Open Water Tank Cap and drain any remaining water into a sink or tub.
For problems with your Handheld Fabric Steamer, please refer to the troubleshooting guide located above. Additional inquiries should be directed to our consumer support services through our Web site, steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
(2) years from the date of purchase when used and maintained in accordance with the Owner’s Guide (the “Warranty Period”). In the event Buyer notifies Steamfast of a defect in the Product within the Warranty Period, Steamfast will replace the Product and/or defective component parts, as applicable and necessary.
Page 14
All such fees and costs shall be the sole responsibility of Buyer. Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease of recordkeeping, it is recommended that Buyer staple or attached the original sales receipt to this Owner’s Guide and record the Product serial number (located on the Product specifications...
Need help?
Do you have a question about the SF-710 and is the answer not in the manual?
Questions and answers