Page 1
Travel Steam Iron Owner’s Guide Guía Del Propietario De La Plancha A Vapor Para Viajes Guide D’utilisation – Fer À Vapeur De Voyage MODEL SF-750 ENGLISH p. 2 MODELO SF-750 ESPAÑOL p. 13 MODÉLE SF-750 FRANÇAIS p. 24...
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce risk of fire, electrical shock or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USE DANGER Any appliance is electrically live even when switch is off. To reduce risk of death by electrical shock: 1.
Page 3
13. Do not use unit where aerosol-based products are being used, or where oxygen is being administered. 14. Unit is only meant to be used with recommended SF-750 accessories. Using other types of attachments may cause damage to unit or injury.
Product Information UNIT FEATURES & ACCESSORIES Ironing Plate Main Body Heating Indicator Light Water Tank Cover Water Tank Windows (2) Steam/No Steam Switch Steam Burst Buttons (2) Temperature Control Dial Water Tank (internal) Voltage Selector Measuring Cup Travel Bag 4 | ENGLISH...
Page 5
• The Ironing Plate (1) is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases. • The Main Body (2) contains the unit's internal heating components. • The Heating Indicator Light (3) will turn off when set temp is reached. •...
Using the Travel Steam Iron SETTING VOLTAGE The Travel Steam Iron features dual-voltage functionality, which allows it to function correctly in regions with either 100-127V or 220-240V electrical voltage standards. Voltage is set using the Voltage Selector. For use in Canada or North America, the voltage selector switch should be placed in the 120 volt position.
Page 7
FILLING WATER TANK (FOR STEAM IRONING) 1. Turn off and unplug unit. 2. Place unit (Ironing Plate down) on a flat, heat-resistant surface. 3. Fill Measuring Cup with water up to (1.1 oz. / 32 ml.). NOTE: In order to extend the life of your unit and keep it functioning at it’s maximum potential, it is highly recommended that distilled or de-mineralized water be used in Water Tank.
OPERATING UNIT DRY IRONING 1. Plug the power cord into a standard grounded wall outlet. 2. Slide the Steam Button to no steam before ironing. 3. Turn the Ironing Plate On by turning the Temperature Dial clockwise to a desired temperature. Synthetics, Silks (LOW TEMP) 4.
Storage & Care CLEANING & STORAGE 1. Turn Temperature Control Dial to "off" (O) position. Unplug power cord. 2. Allow Ironing Plate to cool for 30 minutes. 3. Open Water Tank Cover and drain any remaining water into a sink or tub. Close Cover when finished.
Product Support NOTE: Due to continuing improvements, part numbers listed above may change. For assistance ordering parts, please contact Consumer Service directly. PRODUCT SPECIFICATIONS MODEL SF-750 VOLTAGE 100V - 127V / 220V - 240V WATTAGE 1,000W AMPERAGE 3.0A WATER CAPACITY 2 OZ.
(1) year from the date of purchase when used and maintained in accordance with the Owner’s Guide (the “Warranty Period”). In the event Buyer notifies Steamfast of a defect in the Product within the Warranty Period, Steamfast will replace the Product and/or defective component parts, as applicable and necessary.
Page 12
All such fees and costs shall be the sole responsibility of Buyer. Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease of recordkeeping, it is recommended that Buyer staple or attached the original sales receipt to this Owner’s Guide and record the Product serial number (located on the Product specifications...
Need help?
Do you have a question about the SF-750 and is the answer not in the manual?
Questions and answers