Steamfast SF-760 Owner's Manual

Steamfast SF-760 Owner's Manual

Cordless steam iron

Advertisement

SF-760
C O R D L E S S S T E A M I R O N
O W N E R ' S G U I D E

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SF-760 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Steamfast SF-760

  • Page 1 SF-760 C O R D L E S S S T E A M I R O N O W N E R ’ S G U I D E...
  • Page 2: Important Safety Instructions

    See steamfast.com to view, download and print the most current version of these instructions. INTENDED USE: This product is intended to be used indoors for ironing and garment steaming in the United States.
  • Page 3 special care to avoid contact with hot water when turning the product upside down to empty the reservoir. - To reduce the risk of contact with hot water, test whether steam is ready before each use while carefully holding the product away from your body.
  • Page 4 - When filling Water Tank, only water should be used in unit - other cleaning agents could damage unit or cause injury. Distilled or de-mineralized water is highly recommended, in order to minimize potential build-up of mineral deposits. Do not overfill unit. - Do not remove water tank cap during use.
  • Page 5 the other.) To reduce the risk of electrical shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
  • Page 6: Product Information

    Product Information 6 | ENGLISH...
  • Page 7 1. The Ironing Plate is the heated, non-stick surface that is used to press fabrics, remove wrinkles and create creases. 2. The Main Body contains the unit’s internal heating components 3. The Base works as a docking and reheating station. 4.
  • Page 8 Using the Cordless Steam Iron FILLING WATER TANK (FOR STEAM IRONING) 1. Turn off iron and unplug Base. 2. Place unit on a flat surface and hold the iron upright. 3. Use provided fill cup to fill Cordless Iron with water to MAX fill line on Water Tank.
  • Page 9: Operating Unit

    OPERATING UNIT Your SF-760 Cordless Iron comes with a built-in Auto-Off Feature. When the Cordless Iron is placed on the Base and powered on, the iron will automatically shut off if not removed from Base after 8 minutes. Always place Iron securely on the Base when not in use. Do not rest Iron on other surfaces or attempt to stand Iron upright.
  • Page 10 5. To Produce Steam • For Continuous Steam: Once the Heating Indicator Light has turned off (indicating selected Ironing Plate temperature has been reached), remove the Cordless Iron from the base and move the Continuous Steam Switch to the position. After a few seconds, the unit will automatically begin to emit steam from the Ironing Plate.
  • Page 11: Dry Ironing

    DRY IRONING 1. Plug power cord into a convenient electrical outlet. 2. Set the Cordless Iron on the Base, ensuring back of Iron sits flush against base. 3. When Heating Indicator Light turns off, the Ironing Plate has reached its set temperature. Be sure to set Continuous Steam Switch to position to avoid water leakage.
  • Page 12: Storage & Care

    Storage & Care CLEANING & STORAGE 1. Turn Temperature Control Dial to OFF position. To eliminate the potential for water leakage, move Continuous Steam Switch to OFF position. Place unit securely on the Base. 2. Unplug the power cord. Allow unit to cool for at least 30 minutes. 3.
  • Page 13: Troubleshooting

    For problems with your Cordless Steam Iron, please refer to the troubleshooting guide located above. Additional inquiries should be directed to our consumer support services through our Web site, steamfast.com. If you do not have internet access, you may also contact our Consumer Service Department by telephone, at 1-800-711-6617.
  • Page 14: Warranty Information

    (2) years from the date of purchase when used and maintained in accordance with the Owner’s Guide (the “Warranty Period”). In the event Buyer notifies Steamfast of a defect in the Product within the Warranty Period, Steamfast will replace the Product and/or defective component parts, as applicable and necessary.
  • Page 15 All such fees and costs shall be the sole responsibility of Buyer. Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease of recordkeeping, it is recommended that Buyer staple or attach the original sales receipt to this Owner’s Guide and record the Product serial number (located on the Product specifications...
  • Page 16 Steamfast 415 East 13th Street, Andover, KS 67002 1-800-711-6617 steamfast.com consumerservice@steamfast.com T760-003 R-, V00...

Table of Contents