Recommended Footprint And Stencil Design; Recommended Compatible Footprint - Quectel UG96 Manual

5
Recommended Footprint and Stencil
Design
This chapter mainly introduces the recommended compatible footprint and stencil design of UG96, UG95
and M95 R2.0. All dimensions are measured in millimeter (mm), and the tolerances for dimensions
without tolerance values are ± 0.05mm.

5.1. Recommended Compatible Footprint

The following figure shows the bottom views of UG96, UG95 and M95 R2.0.
UG96
UG96&UG95&M95 R2.0_Compatible_Design
UG95
Figure 19: Bottom Views of UG96/UG95/M95 R2.0
HSPA/UMTS/GSM/GPRS Module Series
UG96&UG95&M95 R2.0 Compatible Design
M95 R2.0
30 / 42