Neomitis RTMA Installation And Operating Instructions

INSTALLATION AND OPERATING
INSTRUCTIONS
MECHANICAL ROOM
THERMOSTAT
TABLE OF CONTENTS
Overview ................................................................................................................. 1
.............................................................................................................. 1
................................................................................................................. 1
......................................................................................................................................... 1
....................................................................................................... 2
................................................................................................................ 2
............................................................................................................. 2
................................................................................................................ 2
...................................................................................................... 2
........................................................................................... 2
...................................................................................... 2
OVERVIEW
Thank you for choosing to purchase our product. The
wired mecanical room thermostat is extremely easy to
designed to make your life easier and help you to save
which is connected to it.
INSTALLATION
To ensure that your thermos-
tat provides accurate readings
-
on an inside wall, away from
direct sunshine and any other
sources of heat or cold such as
radiators, cold draughts, etc.
RTMA NEO ENG CP V01 31 03 2021
The thermostat measures the temperature of the place where it is installed.
RTMA
MOUNTING OF THE BASE
1- Remove the main control dial.
3- Remove the front cover.
4-
5- Use the two opened areas in order to pass the
WIRING
Please verify that the total start up load of any actuators connected to the
1
2- Loosen the screw in the front face of
the unit.
x2
2
Switched Live out
10 mm max.
16 mm max.
-
areas
-
-
Heating
load*
Earth
1