Table of Contents
Advertisement
Data Logging
Setting
Enable Logging
Privacy Password
Clear Log
Realize Language Setup
Buttons
Setting
Activate on Release
Dwell Time
Release Time
Blank Button Fill Color
Button Margin
Social Networking
Setting
Allow Social Networking
Amp Connect
Setting
Select Amp
Set up Amp
Scanning
For the scanning settings to be available, your amplifier must be turned on, charged, and communicating
with the device. For descriptions of the scanning settings, see "Setting up Switch Scanning" on page 59.
PRiO User's Guide
Description
Turn on data logging, allowing your device to collect language usage data which you
can upload to the Realize Language website for web-based analysis or save to a file to
analyze manually.
Set or change your data logging privacy password.
Clear usage data for the current person.
Upload data collected for a person to the Realize Language website for analysis.
Description
When this setting is turned on, a button will not activate until released, rather than
.
on touch
Controls the delay before a button press is recognized in case a user needs to slide
across multiple buttons before pressing the intended button.
All buttons are disabled for specified period after each button press event to prevent
accidental double button presses.
Typically set to white. Allows the color of blank buttons to be changed to highlight
stored buttons.
To add extra space around buttons, select a margin size between 1 Point and 100
Point. The default size is None.
Description
When turned on, this setting allows you to share text from the SDB to social networks.
Description
Select your amplifier case to make a Bluetooth connection to the LAMP Words for
Life software for getting proper battery status readings. This will allow the iPad sound
to route to the case's speakers.
Set left and right speaker volume, bass, and treble.
67
Advertisement
Table of Contents
