Connecting To A Computer For The First Time - Prio mini User Manual

Connecting to a Computer for the First Time

When you connect your PRiO to a computer for the first time to perform an update or backup, a message
prompts you to "trust" the computer. You must tap Trust to proceed.
On a dedicated PRiO device: The Trust message is hidden behind the application screen. Use the following
procedure to access the message.
Important! You will need to repeat this procedure the first time you connect your device to a different
computer.
1. On the computer, launch iTunes
2. Connect your USB cable to the device and the computer.
3. On the PRiO device, simultaneously hold down the Home key and the device power button until the
device screen turns black. This will take approximately 15-30 seconds.
4. Release the Home key and power button. The device will restart. When the device has restarted, the
Trust message will appear.
5. Tap Trust.
6. On the computer, a message similar to the following will appear:
7. Click Continue. A progress bar will be displayed.
8. When the progress bar disappears, unplug the USB cable from the device and immediately plug it
back in. This will refresh the device.
9. You are now ready to proceed with your update or backup.
PRiO User's Guide
.
®
18