Charging The Device And Amplifier - Prio mini User Manual

Charging the Device and Amplifier

Connecting the Charger
You received a battery charger with your PRiO. One end of the charger
plugs into a wall outlet—a surge protector is recommended. The other
end has two connectors, allowing you to charge the device and amplifier
at the same time.
• One connector plugs into the amplifier.
• The other connector is a receptacle for the USB cable that came with your device.
Amplifier charging port
Device charging port
Use only the battery charger or backup charger provided with your device.
Cords and cables are potential entanglement or strangulation hazards. Please consider this prior to placing these items
with device users.
Locate the device in a safe location while charging.
Batteries are not replaceable by the customer.
Using the Backup Charger
A backup charger came with your device. Use that charger only if necessary in an emergency. The
backup charger can only be used with the device. Do not use it to charge the amplifier.
To charge the device and amplifier:
Hint: We suggest charging both the device and the amplifier each night.
1. Tap the device's power switch to turn the display light off.
2. Plug the charger's amplifier connector into the amplifier.
3. Plug one end of the USB cable that came with your device into the device and the other end into the
charger's receptacle.
4. Plug the other end of the charger into a wall outlet or surge protector.
5. The amber light next to the amplifier's charging port will flash during charging and remain on when
the amplifier is fully charged.
When the device and amplifier are fully charged:
1. Unplug the connectors from the device and amplifier.
2. Unplug the charger from the wall outlet or surge protector (optional).
3. Tap the device's power switch to turn the display light on.
PRiO User's Guide 12