Table of Contents
Advertisement
38/96
SYDFED-2X, SYDFED-3X, SYHDFED-1X | Transport and storage
Weights
Carrying the SY(H)DFED
control system
Bosch Rexroth AG, Edition 11.2021, RE 30017-B
6 Transport and storage
6.1
TRANSPORTING THE SY(H)DFED CONTROL SYSTEM
SY(H)DFED control systems can be transported using a fork lift truck or lifting
gear.
▶ Make sure that the load-carrying capacity of your fork lift truck or lifting gear is
sufficient.
Table 9: Weights
SYDFED 2X / size
Weight
Pump without through-
drive, incl. pilot valve
In addition, pre-load
valve
In addition, in case
of external actuating
system supply
SYDFED 3X / size
Weight
Pump without through-
drive, incl. pilot valve
In addition, pre-load
valve
In addition, in case
of external actuating
system supply
SYHDFED 1X / size
Weight
Pump without through-
drive, incl. pilot valve
The dimensions vary depending on optional equipment. The values applicable to your SY(H)
DFED control system can be found on the installation drawing or in the data sheet of the
relevant control system.
SY(H)DFED control systems of a low weight can be transported manually, if
required (the weight for brief lifting should not exceed 15 kg for women and 25 for
men).
CAUTION! Danger caused by heavy loads!
Carrying heavy control systems can cause health damage!
▶ When carrying the control system, apply suitable techniques for lifting,
lowering and relocating or use suitable lifting gear.
▶ Use personal protective equipment (e.g. safety goggles, protective gloves,
suitable workwear, safety shoes)
▶ Don't transport the control system at sensitive attachments (e.g. sensors or
valves).
▶ Put the control system carefully on the supporting surface in order that it is not
damaged.
18
28
45
71
kg
14
17
23
35
kg
3.3
3.3
3.3
6.3
kg
2
2
2
2
71
100
140
180
kg
49
71
75
80
kg
6.3
6.3
6.3
6.3
kg
2
2
2
2
125
180
250
355
kg
100
115
197
220
100
140
47
62
6.3
6.3
2
2
Advertisement
Table of Contents
