Table of Contents
Advertisement
Safety instructions | SYDFED-2X, SYDFED-3X, SYHDFED-1X
High noise emission during operation!
The noise emission of SY(H)DFED control systems depends, among others, on
speed, operating pressure and the installation situation. Under normal operating
conditions, the noise pressure level may rise above 70 dB(A). This can cause
hearing damage.
▶ Always wear hearing protection when you work in the vicinity of a running
SY(H)DFED control system.
Hot surfaces!
Risk of burning.
The SY(H)DFED control system heats up considerably during operation. The pilot
valve of the SY(H)DFED control system gets so hot during operation that you may
burn yourself.
▶ Let the SY(H)DFED control system cool down before touching it.
▶ Protect yourself by wearing heat-resistant protective clothing, e.g. gloves.
Health-damaging hydraulic fluid!
Contact with hydraulic fluids can be damaging to your health (e.g. eye injuries,
skin damage, intoxication upon inhalation and swallowing).
▶ Always check the lines for wear and damage before each commissioning.
▶ When doing so, wear protective gloves, safety goggles and suitable working
clothes.
▶ If nevertheless hydraulic fluid comes into contact with the eyes or penetrates
the skin, please consult a doctor immediately.
▶ When handling hydraulic fluids, strictly observe the safety notes of the
hydraulic fluid manufacturer.
Easily inflammable hydraulic fluid!
Risk of fire.
▶ Keep open fire and sources of ignition away from the SY(H)DFED control
system.
▶ Ensure sufficient ventilation.
Improperly laid lines and cables!
Risk of stumbling!
▶ Lay cables and lines so that no one can stumble over them.
Uncontrolled system behavior!
The failure of individual components can lead to malfunction of the assembly and
therefore to unforeseeable behavior!
▶ Replace or have defective components replaced immediately.
WARNING
CAUTION
RE 30017-B, Edition 11.2021, Bosch Rexroth AG
13/96
Advertisement
Table of Contents
