Table of Contents
Advertisement
GENERAL INSTRUCTIONS
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three and four.
SITE PREPARATION
The site for the shed must be level. An uneven surface may result in misalignment of
parts.
It is recommended that the shed be set on a 100mm concrete slab and anchored down
appropriately (refer to last page for details).
Anchor sets are not supplied as standard items with this product as some customers
wish to use their own anchoring systems.
TOOLS REQUIRED
10mm
(Steel)
A NOTE ON SAFETY
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
It is highly recommended to erect the shed with two or more people.
ABSCO INDUSTRIES
10mm
(Masonary)
ASSEMBLY INSTRUCTION MANUAL
Absco Industries ECO
Shed Model: J30232GECOK
TOOLS OPTIONAL
SHED MODEL: J30232GECOK
23-11-2017
PAGE 02
Advertisement
Table of Contents
