Sharp SDW6747GS Operation Manual page 8

CONTROL PANEL
STATUS WINDOW
DELAY TIME
If the DELAY option is selected, the number of delay start hours
will display in the Status Window.
If the dishwasher is working and the remaining cycle time is
more than 1 hour, number of hours and minutes left will be
shown alternately in the Status Window. 1 hour is shown as 1H.
CYCLE LIGHT
Flashes once the program has been entered and the START/
CANCEL pad is pressed. It also flashes if the door is opened
during a wash cycle. Close the dishwasher door to begin or
continue a wash cycle.
NOTE
The remaining time may increase or decrease as the Smart
Sensor assesses the soil level and adjusts the number of water
fills required for the load.
ERROR INDICATION
In certain situations that are critical to the safe function and
operation of the dishwasher, the machine will shut down and
display an error code. (See Error Codes on page 20.)
If Error Codes are displayed, contact the dealer or servicer.
They will be able to provide assistance in troubleshooting the
problem or locate an authorized service technician if needed.
CYCLE PROGRESS INDICATOR
The cycle progress lights indicate the progress of the cycle
while the dishwasher is running. They are located on the front
of the dishwasher panel on the right side of the pocket handle.
PROCESS
WASH
When the dishwasher is in a wash or
rinse stage of a cycle, the WASH light is
illuminated.
DRY
When the dishwasher is in a drying stage
of a cycle, the WASH and DRY lights are
illuminated.
CLEAN
After the dishwasher has completed all
stages of a cycle, all indicator lights are
illuminated.
If the door is opened when the CLEAN
lights are illuminated, all the lights will
turn OFF after 30 seconds.
8
INDICATOR