Sharp SDW6747GS Operation Manual page 7

OPTIONS
Delay
13
To delay the start of a selected cycle, press the DELAY
pad until the desired delay time shows in the LED display
screen. This allows you to automatically start your
dishwasher with 1 to 24 hours delay. To cancel the delay
start option and begin the cycle before the delay period is
over, press the START/CANCEL pad.
Wash Zone
14
Select the rack when you wash the upper or lower rack by
pressing Wash Zone. This option is not available to "AUTO"
and "RINSE" cycles.
Power Wash
15
Use this option to wash pots, pans, durable serving bowls
and other large, heavily soiled or hard-to-clean dishes. To
use Power Wash, place the dishes facedown in the lower
rack directly above the power wash arm in the back left
corner.
Extended Wash
16
For use with heavily soiled and/or dried-on, baked-on soils.
This option adds about 30 minutes to the cycle time for
Auto, Heavy Duty, Normal and Light. This option must
be selected prior to starting the cycle.
Hi Temp Wash
17
When the HI TEMP WASH function is selected, the
temperature of the water will be maintained at 140℉ (60
℃) maximum.
Heat Dry
18
When the HEAT DRY function is selected, the heater will
operate during the drying process.
Sanitize
19
To sanitize dishes and glassware, select the Sanitize option.
When the SANITIZE function is selected, the temperature
of the water will be maintained at 158℉ (70 ℃) maximum.
NOTE: It is possible that 158℉ (70 ℃) may not be reached,
if the temperature of the incoming hot water does not reach
the suggested temperature.
7
CONTROL PANEL