Table of Contents
Advertisement
3. Move the focus to the box under the WEB SHARING in the APPS MENU.
4. Press ENTER button on the remote control.
Display the WEB SHARING options setting screen.
Item
WEB CAPTURE
ACCESS PASSWORD
DELETE SHARED FILES
5. After setting up options, move the focus to OK and press the ENTER button.
If USE is selected both for WEB CAPTURE and ACCESS PASSWORD, the screen in below will displayed on. The
access password will be changed every time the password is reset or the projector is powered ON and OFF.
Starting the WEB SHARING
1. Start up the web browser on the computer and access the WEB SERVER.
• Please refer "How to access the WEB SERVER" on the previous page
2. Input four digits number displayed on the APPS MENU and then click LOGIN.
• If NOT USE is selected for the access password at the step [5], the WEB SHARING screen will be displayed.
• The projector screen will be switched to the PROJECTOR CONTROL screen once you click the PROJECTOR
CONTROL tab, same as it, the projector screen will be switched to the MultiPresenter screen once you click the
MultiPresenter tab.
Explanation
Select USE/NOT USE capture from
the WEB browser. By setting this ON,
the projector screen will be displayed
onto the browser screen every 5
seconds.
Select whether to USE/NOT USE
the password for accessing the WEB
SHARING.
Delete all shared files
17
6. WEB SERVER
Remark
Factory default setting is NOT USE
Factory default setting is NOT USE
Advertisement
Table of Contents
