Seat Belt Nonusage Warning Lamp; Malfunction And Indicator Lamp In The Center Console; Airbag Off Indicator Lamp - Mercedes-Benz CL Operator's Manual

Instruments
Operation
and controls
Malfunction and indicator lamps

Seat belt nonusage warning lamp

With the electronic key in starter switch
position 2, the seat belt nonusage warning
lamp comes on, and a warning sounds for a
short time if the driver's seat belt is not fastened.
After starting the engine, the seat belt nonusage
warning lamp blinks for a brief period to remind the
driver and passengers to fasten seat belts.
Instrument
Driving
cluster display
Practical hints Car care
296
Malfunction and indicator lamp in the center
console

AIRBAG OFF indicator lamp

The 7 indicator lamp will light up for approximately
6 seconds when you turn the electronic key in starter
switch to position 1 or 2.
It does not light up if there is a fault in the system.
The 7 indicator lamp stays lit as long as a
TM
BabySmart child seat is properly installed on the front
passenger seat. It indicates that the front passenger
airbag is switched off.
See page 88 for BabySmart
system.
TM
Baby Smart is a trademark of Siemens Automotive Corp.
Technical
data
TM
airbag and its deactivation
Index