Electronic Stability Program (Esp) - Warning Lamp; Seat Belt Nonusage Warning Lamp - Mercedes-Benz 2002 C 230 Kompressor Operator's Manual

Instruments
Operation
and controls
Malfunction and indicator lamps
Electronic stability program (ESP) — warning lamp
The yellow ESP warning lamp in the
speedometer dial comes on with the
electronic key in starter switch position 2.
It should go out with engine running.
If the ESP malfunction indicator lamp remains
illuminated with the engine running, a malfunction has
been detected in the system. Pressing the accelerator
pedal will require greater effort. Only partial engine
output will be available.
See electronic stability program (ESP) on page 274 if the
warning lamp lights up or flashes when the vehicle is
moving.
Instrument
Driving
cluster display
288
Practical hints Car care

Seat belt nonusage warning lamp

With the electronic key in starter switch
position 2, the seat belt nonusage warning
lamp comes on, and a warning sounds for a
short time if the drivers seat belt is not fastened.
After starting the engine, the seat belt nonusage
warning lamp blinks for a brief period to remind the
driver and passengers to fasten seat belts.
Technical
Index
data