Malfunction And Warning Messages In The Multifunction Display - Mercedes-Benz CL Operator's Manual

Malfunction and warning messages in the
multifunction display
Malfunction and warning messages for the following
systems will be displayed immediately in the
multifunction display.
They are divided into three categories.
Category C1:
Messages of most immediate priority.
These cannot be cleared from the instrument cluster
using the J button.
Categories C2 and C3:
Messages of less immediate priority.
These can be cleared from the instrument cluster using
the J button and are then stored in the malfunction
message memory, see page 136
Malfunction and warning messages
Instruments
Operation
and controls
Instrument
Driving
cluster display
Note:
Certain malfunction and warning messages are
accompanied by an audible signal.
Malfunction and warning messages in red are always
accompanied by an audible signal.
Temporary messages such as "TRUNK OPEN!" will not
be stored in the malfunction message memory.
Warning!
All categories of messages contain important
information which should be taken note of and,
where malfunction indicated, addressed as soon as
possible at an authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz Limited
Warranty, or result in property damage or personal
injury.
297
Practical hints Car care
Technical
Index
data