Download
Share
Print this page
  1. Manuals
  2. Brands
  3. MTI Manuals
  4. Switch
  5. MTI Connect
  6. Product manual

MTI Connect Product Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
PARTS INCLUDED
MTI CONNECT™ HUB PRODUCT MANUAL
MTI Connect™ Hub
Screws (4)
VHB (2)
Power Supply
REQUIRED, BUT NOT INCLUDED
IntelliKey
RFID Cards (Required for RFID-enabled devices)
Power Cable (Region-Specific)
NETWORK PAIRING
www.mtigs.com | T:800.426.6844
MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the MTI Connect and is the answer not in the manual?

Questions and answers

Related Manuals for MTI MTI Connect

Summary of Contents for MTI MTI Connect

  • Page 1 MTI CONNECT™ HUB PRODUCT MANUAL MTI Connect™ Hub Screws (4) VHB (2) Power Supply REQUIRED, BUT NOT INCLUDED IntelliKey RFID Cards (Required for RFID-enabled devices) Power Cable (Region-Specific) NETWORK PAIRING www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...
  • Page 2 If using with MTI Connect application software, Connect the Hub to the internet with an available Ethernet cable or setup with WIFI credentials. If not using with MTI Connect, move on to Freedom Micro Pairing.
  • Page 3 5 seconds, the should light green, indicating the position if the position is fully IntelliKey’s LED will still remain the IntelliKey will now control the merchandised. red. puck. www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...
  • Page 4 LED indicator will flash white device. A double beep indicates slowly if disarmed or solid white if that the key will now control the armed. device. www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...
  • Page 5 A double beep indicates beep to confirm it has joined the that the key will now control the network. lock. www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...

  • Page 6: Led Status Indicators

    5 minutes, Power Reset cycle power to the Hub or contact support. Hub is in battery backup mode Status LED Flashing Red Reconnect the Hub to power. www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...

  • Page 7: Network Status Indicators

    Network N etwork Hub is in Wi-Fi configuration mode. System Status Network LED Flashing Blue Refer to Connect Hub Wi-Fi setup guide. Power Reset www.mtigs.com | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...
  • Page 8 The two lights next to the connector indicate the connectivity status and network activity. Warning: Ports designated as “used for installation and maintenance” must not be accessed by end users. Only MTI- certified technical personnel may use these ports during installation and maintenance.
  • Page 9 | T:800.426.6844 MTI P/N 063-00210 rev E ©2021 MTI All Rights Reserved...

  • Page 10: First Aid Measures

    Lithium-Ion batteries have finite life cycles. If the time that the battery powers equipment between charges becomes shorter than usual, the battery life is at an end. Remove device from service and contact MTI for guidance on replacement options. CAUTION •...