Table of Contents
Advertisement
Click "Network", select "LAN Settings". Enter IP Address, Subnet Mask. Then
click "Save" and wait for the router reboot automatically.
MAC Address
IP Address
Subnet Mask
The router's LAN IP address and WAN IP address cannot be on the same IP
segment. If not, the router will not be able to access Internet.
Be sure to make a note of any changes you apply to this page. If you change
the LAN IP address of the router, you have to open a new connection to the
new IP address and log in again. Also, you have to set the default gateway
addresses of all LAN PCs to this new IP address.
Displays the Router's LAN MAC address.
Displays the Router's LAN IP address.
Displays the Router's LAN subnet mask.
36
Advertisement
Table of Contents
