Table of Contents
Advertisement
III-3-1-3.
WAN Settings- PPPOE
Click "Network", select "WAN", then select Connection Type "PPPOE". Enter
the ISP login User Name and the ISP login Password. Finally, click "Save" to
confirm. To confirm the configuration details, click "System Status" > "WAN
Status".
Connection Type
User Name
Password
MTU
Service Name
Specify a connection type:
Static IP mode, Dynamic IP (DHCP), PPPOE
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1492.
Enter the host name of your computer here If
required.
33
Advertisement
Table of Contents
