Adjusting The Slicing Thickness; Installing The Reversible Shredding Disc Or French Fry Disc; Installing The Multipurpose Blade Or Dough Blade - KitchenAid KFP0930 Instructions Manual

ASSEMBLING THE FOOD PROCESSOR

Adjusting the slicing thickness

Thinner_
Set the desired slicing thickness by
1
moving the lever to the left for thinner
slices or to the right for thicker slices.
Installing the r_ever_sible shr_edding disc or_ fr_ench fr_y disc
Hold the french fry disc or reversible
1
shredding disc by the 2 finger grips with
the desired shredding side facing UP .
Insert the disc adapter into the hole in
the bottom of the disc.
TIP: You may need to turn the disc/adapter until it drops down into place.
Installing the multipur_pose blade or_ dough blade
IMPORTANT: The multipurpose blade and dough blade can only be used with the work bowl.
Place the blade on the power shaft.
1
Rotate the blade so it falls into place on
the power shaft.
10
NOTE: The lever only works with the
adjustable slicing disc. Changing thickness
settings with other discs or blades installed
Thicker_
will have no effect on operation.
Finger_ gr_ip
2
2
With the work bowl installed, slide the
drive adapter onto the power shaft.
Then install the work bowl cover, being
sure it locks into place.
Push to lock: Press down firmly on the
multipurpose blade until it is down as
far as it will go. The multipurpose blade
features an internal seal that fits tightly
over the center of the work bowl.
Dr_ive
adapter_