Part 4 Additional Thermostat Features; Customize The Pre-Programmed Schedule - White Rodgers UP300 Installation Instructions & User Manual

Part 4 Additional thermostat features

4.1 Customize the pre-programmed
schedule
You can change the day, time period or temperature settings of the
pre-programmed schedule.
1. Press the SYSTEM switch to HEAT (to program the heating
schedule) or COOL (to program the cooling schedule).
2. Press the MENU button, and using the
SCHEDULE is fl ashing. Press OK.
The screen will look like this:
Day(s) of the week
Time period
beginning
Time period
3. The schedule for Monday (MON) is displayed.
• To modify the start time of the fi rst time period (Morning) use the
buttons to change the beginning of the morning time in
15-minute increments.
• Use the buttons to set the Morning temperature.
• When the time and temperature are set, press OK.
4. The next time period (Day) is now displayed. Program Day and then
Evening and Night Time Periods for Monday as you programmed
Morning.
buttons, scroll down until
20
5. To program subsequent days, use the
OR move to step 6.
Easy Copy function
• You can copy one day's schedule to other days of the week.
– If the Copied Day is Monday,
working days, all remaining six days, the weekend, or any
single day.
– If the Copied Day is not Monday,
single day.
• After programming a day you want to copy, press COPY/PASTE.
– The copied day will be displayed solid at the top of the screen.
– Next to it, the following day(s) will be fl ashing. To paste the
programmed schedule to the fl ashing day(s), press
COPY/PASTE.
– To paste the copied schedule to a different day, press
the DAY button to advance through the days of the week.
– When your targeted day is fl ashing, press DAY/COPY to
paste the schedule.
6. Repeat the process for each day by pressing the DAY button to
advance to the next day.
7. Press the DONE button when you are fi nished.
Easy Copy function
you can copy to the remaining
you can copy to any other
21