Turn On Power To Your Heating And Cooling System; Set Time And Date; Review Pre-Programmed Schedule - White Rodgers UP300 Installation Instructions & User Manual

3.4 Turn on power to your heating and
cooling system

3.5 Set time and date

1. Press the MENU button and then using the
until TIME is fl ashing. Press OK.
2. Using the buttons, set the current hour, and press OK.
3. Using the buttons, advance to the next screen, set the current
minutes, and press OK.
4. Repeat the process to set the current year (2 digits), month and day.
Press DONE when you are fi nished.
Congratulations!
You have completed the basic setup of
your new thermostat. It's ready to use.
To read about additional thermostat features, continue to section 4.
buttons, scroll down
18

3.6 Review pre-programmed schedule

The thermostat is set to control temperature according to the following
pre-programmed, energy-effi cient schedule. If this schedule meets
your needs, no further action is required.
Mon - Fri
Period Start Time
Morning 6 am
Day 8 am
Evening 6 pm
Night 10 pm
Morning 6 am
Day 8 am
Evening 6 pm
Night 10 pm
To customize this schedule, continue to the next page (section 4.1).
Sat - Sun
Temp Start Time Temp
70°F 6 am 62°F
60°F 8 am 70°F
70°F 6 pm 70°F
62°F 10 pm 62°F
78°F 6 am 82°F
85°F 8 am 78°F
78°F 6 pm 78°F
82°F 10 pm 82°F
19