Select Options - White Rodgers UP300 Installation Instructions & User Manual

3.3 Select options

Press the MENU button and, using the
MORE OPTIONS is fl ashing. Press OK.
You will be prompted to answer 6 "Options" questions, shown here.
• Use buttons to answer each question.
• Use buttons to advance to the next question.
Navigation Buttons
Options Default Setting Additional Information
1. Do you want ON
to be reminded (13 weeks)
when it is time to
change the air fi lter?
2. Do you want the ON
thermostat to work (programmable) Programmable Mode.
in Programmable
Mode?
It you select OFF, your thermostat will work as a
non-programmable unit. The clock and date will not be displayed.
Some functions, identifi ed by
only in Programmable Mode.
buttons scroll down until
Select default ON for now.
To modify a fi lter-change
reminder, see Additional
Features section 4.9.
Select default ON for
Select OFF to operate in
Non-Programmable Mode.
in this manual, are available
16
Options Default Setting Additional Information
3. Do you have a OFF
Heat Pump? (no Heat Pump)
To determine if you have a Heat Pump and/or whether it is a
1-stage or 2-stage model, see the Appendix at the end of manual.
4. Do you want the FA
Cycle Rate to be (fast)
Fast or Slow?
5. Do you want °F
temperature (Fahrenheit)
displayed in °C
(Celsius) or °F
(Fahrenheit)?
6. How much 0 (no offset)
displayed
temperature offset
do you want?
When you have answered all 6 questions, press the DONE button.
If you do not have a Heat
Pump, select OFF.
If you do have a Heat Pump,
use the buttons
to select (On1) for a 1-stage
or (On2) for a 2-stage
Heat Pump.
Select SL (slow) if you
have Hydronic (water
or steam) Heating.
Otherwise, use default FA.
Select default 0 for now.
To adjust the displayed
temperature reading, see
Additional Features
section 4.10
17