Step 5.
Remove the touchpad bracket.
Figure 39. Remove the touchpad bracket
Step 6.
Remove the touchpad.
Figure 40. Remove the touchpad
Refer to "Major FRUs and CRUs" on page 26 to look up details about the following replacement part:
touchpad assembly
conductive tape
Disassemble the LCD module
The LCD module as a whole is not a FRU. Instead, it contains FRUs as its components. Before
disassembling the LCD module, make sure it has been detached from the upper case. Refer to "Remove the
upper case (with keyboard)" on page 43 for instructions.
Remove the LCD panel
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
"Remove the upper case (with keyboard)" on page 43
50
Hardware Maintenance Manual