Remove the heat sink
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
Step 1.
Remove the 6 screws.
Figure 11. Remove the 6 screws
Screw specifications
1
M2.0 x 2.5
Step 2.
Take out the heat sink.
Figure 12. Take out the heat sink
Refer to "Major FRUs and CRUs" on page 26 to look up details about the following replacement part:
heat sink
36
Hardware Maintenance Manual
Number of screws
6
Color
Black