Remove the power board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
"Remove the heat sink" on page 36
Step 1.
Detach the power board connector from the system board.
Figure 13. Detach the power board connector
Step 2.
Remove 1 screw.
Figure 14. Remove 1 screw
Screw specifications
3
M2.0 x 5.0
Number of screws
1
Color
Silver
.
Chapter 4
Removing a FRU or CRU
37