Figure 26. Remove one screw and remove the I/O board with cable
Screw specifications
M2.0 x L4.0
Go to
https://support.lenovo.com/partslookup
part:
I/O board with cable
Remove the power board with cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 32
"Remove the battery pack" on page 33
"Remove the fans" on page 40
"Remove the CMOS battery" on page 41
"Remove the I/O bracket (right)" on page 43
"Remove the I/O board with cable" on page 43
Step 1.
Peel off the tape.
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
45