It fits in a slot like a conventional PC card and 32-bit path is used for data transfer. It supports the following I/O features: 2 USB ports (root hub and two or four down stream function ports) Auto detect speeds and connections of devices...
This driver can be used either the following operating systems: Windows98 Windows98 Second Edition. Windows Millennium. Windows 2000. Windows XP. 3.0 Driver Limitations Current limitations of the driver are: Composite devices and Hi -Speed Isochronous Transfers are currently not supported. 4.
Page 6
2. Insert the “Driver CD” into the CD-ROM and select the “Include this location in the search”. Please use the Browse to change the path to “your cdrom driver:\USB\Item\98 me 2k xp”. - 5 -...
Page 7
3. When display Hardware Installation screen, Press “Continue Anyway”. 4. Wait a moment to install files into your system. Then press “Finish”. - 6 -...
Page 8
5. To check your device from “Device Manager”. Press “Start? My Computer? Properties”. - 7 -...
Page 9
6. Open “Device Manager” and check if your device works. - 8 -...
Page 10
7. Note! If there is a yellow exclamation mark on “NEC PCI to USB Enhanced Host Controller” or “USB 2.0 Root Hub Device”, please remove this item from the “Device Manager” by clicking the “Uninstall” button and click “Refresh” to re-install this driver again.
5.0 Driver Installation (Windows 2000) 1. Please make sure this PCI/PCMCIA card has been installed on your system correctly. When starting Windows 2000, the system will find “Universal Serial Bus (USB) Controller”. 2. Press “Next”. - 10 -...
Page 12
3. Select “Search for a suitable driver for my device [recommended]” and press “Next”. 4. Select “Specify a location” and press “Next”. - 11 -...
Page 14
5. Insert the “Driver CD” into the CD-ROM and use the Browse to change the path to “your cdrom driver:\USB\Item\98 me 2k xp”. 6. Choose the “ousb2.inf” file and press “Open”. - 13 -...
Page 16
9. To check your device from “Device Manager”. Press “Start? My Computer? Properties”. Open “Device Manager” and check if your device works. - 15 -...
Page 17
10. Note! If there is a yellow exclamation mark on “NEC PCI to USB Enhanced Host Controller” or “USB 2.0 Root Hub Device”, please remove this item from the “Device Manager” by clicking the “Uninstall” button and click “Refresh” to re-install this driver again.
6. Driver Installation (Windows ME) 1. Please make sure this PCI/PCMCIA card has been installed on your system correctly. When starting Windows ME, it will display the follow screen, please select “ Specify the location of the driver [Advanced]”. 2. Select “Specify a location”. Insert the “Driver CD” into the CD-ROM and use the Browse to change the path to “your cdrom driver:\USB\Item\98 me 2k xp”.
Page 20
3. Press “Next” 4. Press “Finish”. Note! This will restart your system. Please remember to close other programs before you click “Finish” button. - 19 -...
Page 21
Note: Note! If there is a yellow exclamation mark on “NEC PCI to USB Enhanced Host Controller [E13+]” or “USB 2.0 Root Hub Device”, please remove this item from the “Device Manager” by clicking the “Uninstall” button and click “Refresh” to re-install this driver again.
7.0 Driver Installation (Windows 98/98SE) 1. Please make sure this PCMCIA card has been installed on your system correctly. When starting Windows 98/98SE, the system will find the new hardware. Press “Next”. 2. Select “Search for the best driver for your device [Recommended] and press “Next”.
Page 24
3. Select “Specify a location”. Insert the “Driver CD” into the CD-ROM and use the Browse to change the path to “your cdrom driver:\USB\Item\98 me 2k xp”. Press “Next”. 4. Press “Next”. - 23 -...
Page 25
5. Press “Next”. 6. The system will ask you where is the Windows 98/SE CD-ROM ? Please insert the Windows 98/SE CD and use “Browse” item to change the path. - 24 -...
Page 26
7. Press “Finish” and system will find the new hardware again. Please repeat Step 1 to Step 6. 8. When display the follow screen, press “Next”. - 25 -...
Page 27
Note! If there is a yellow exclamation mark on “NEC PCI to USB 2.0 Enhanced Host Controller” or “USB 2.0 Root Hub Device”, please remove this item from the “Device Manager” by clicking the “Uninstall” button and click “Refresh” to re-install this driver again.
Need help?
Do you have a question about the EU-PC2C and is the answer not in the manual?
Questions and answers