Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
T24i-2L
®
Monitor Controls
Brightness
Advanced Settings
Contrast
Port Settings
Menu Settings
Exit
Input Signal: HDMI
Resolution: 1920x1080
To use the controls:
1.
Press
to open the main OSD menu.
2.
Use
or
to move among the icons. Select an icon and press
If there is a sub-menu, you can move between options using
select that function. Use
3.
Press
to move backwards through the sub-menus and exit from the OSD.
4.
Press and hold
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
6.
The ENERGY STAR option resets all user settings to default values so that the monitor
can meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption and
greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and
environmental protection. It improves the concept of energy efficiency of consumers and
manufacturers, and effectively guides the market.
75
75
Refresh Rate: 60Hz
or
to make adjustments. Press to save.
for 10 seconds to unlock the OSD and allow
to access that function.
or
then press
to
for 10 seconds to
Chapter 2.
2-4
Hide quick links:
Advertisement
Table of Contents
