Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo ThinkVision T24i-2L User Manual

Adjusting your monitor image

Using the direct access controls

This section describes the control features to adjust your monitor image.
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon Control
Input Change
1
DDC-CI
Exit
Auto Adjustment
2
Up
Brightness
3
Down
Menu
4
Enter
Note: The T24i-2L uses Natural Low Blue Light Technology that reduces harmful blue light to
protect human eyes while maintaining picture quality in 6500K color temperature.
f you can't make sure the monitor already under Low Blue Light mode, Just do Reset action
in the OSD item Options Factory Reset.
Description
Switches the video input source
Press and hold for 10 seconds to enable or
disable the DDC-CI function
Exit from menu
Optimizes image (size, position, phase and
clock) (For analog [VGA] source only)
Up browsing key
Direct access to Brightness adjustment
Down browsing key
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock
menu/un-lock menu
Press to enter next level on main menu/sub
menu status or enter previous level on
adjustment bar
Chapter 2. 2-3