Mitsubishi Electric VL-250CZPVU-L-ERT Handbook page 71

[4] Remove the reinforcement.
a. Remove the reinforcement fixing screw.
(1 screw: Spl screw PT 5X10 (painted), indicated by
Tightening torque
: 2.7 ± 0.5 N . m
b. Remove the reinforcement by sliding it upward.
Precaution
Be careful not to drop the reinforcement due to
reaction from the plate.
(It may cause an injury or damage to properties.)
[5] Hold the lower part of the front casing (IN) and open it a little bit, and then remove it by sliding it downward.
Front casing (IN)
)
Reinforcement
─ 71 ─
Reinforcement
Front casing (IN)