Mitsubishi Electric VL-250CZPVU-L-ERT Handbook page 54

[4] Remove the lead wires.
a. Remove the lead wires from the styrene grooves
(indicated by ).
Precaution
Be careful not to damage the styrene.
b. Pull out the lead wires stored in the outer side of the
PCB cover (UP).
[5] Remove the PCB cover (UP).
a. Remove the screws.
(2 screws: Spl screw PTT 4X14, indicated by
Precaution
Screws are located where it is not easy to see them.
Tightening torque
: 1.2 ± 0.2 N . m
b. Remove the PCB cover (UP).
Assembly precaution
Be sure to attach the PCB cover (LOW) before
installing the PCB cover (UP).
)
PCB cover (UP)
─ 54 ─
PCB cover (UP)
PCB cover (UP)