Related Manuals for Worldlawn Venom WYS32FS600VL
Summary of Contents for Worldlawn Venom WYS32FS600VL
- Page 1 COMPACT STANDON OPERATORS MANUAL WYS32FS600VL WYS32FS600VLCA WYS36FS600VL WYS36FS600VLCA...
- Page 3 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWN.COM 401 N. COMMERCE STREET BEATRICE, NE 68310 800-267-4255 FAX – 402-223-4103...
-
Page 5: Table Of Contents
Contents AVAILABLE ACCESSORIES ..........................9 SAFETY ................................. 10 SAFETY ALERT SYMBOL ............................10 TRAINING ................................10 PREPARATION ..............................10 OPERATION ................................11 SLOPE OPERATION ............................... 13 MAINTENANCE AND STORAGE ..........................13 SAFETY AND INSTRUCTIONAL DECALS ........................ 15 SPECIFICATIONS .............................. 17 MODEL NUMBER ..............................17 WEIGHT &... - Page 6 STARTING THE ENGINE ............................ 20 BLADE ENGAGEMENT ............................20 DISENGAGING THE BLADES ..........................21 STOPPING THE ENGINE ............................ 21 DRIVING THE MACHINE ........................... 21 DRIVING FORWARD ............................21 DRIVING IN REVERSE ............................21 OPERATING THE PLATFORM ..........................21 OPERATING THE MACHINE WITH THE PLATFORM UP ..................22 OPERATING THE MACHINE WITH THE PLATFORM DOWN ................
- Page 7 WHEEL HUB NUT TORQUE SPECIFICATION ..................... 32 THREAD LOCKING ADHESIVES ......................... 32 COPPER-BASED ANTI-SEIZE..........................32 ADJUSTMENTS..............................33 DECK LEVELING ..............................33 PUMP DRIVE BELT TENSION ..........................33 MOWER DECK DRIVE BELT TENSION ....................... 33 PARK BRAKE ADJUSTMENT ..........................33 FORWARD TRACKING ADJUSTMENT ....................... 33 NEUTRAL ADJUSTMENT ...........................
-
Page 9: Available Accessories
AVAILABLE ACCESSORIES... -
Page 10: Safety
Use only accessories and attachments approved by DANGER: White lettering/Red background. WORLDLAWN • The use of personal protective equipment, such Indicates failure to observe the safety instructions as (but not limited to) safety glasses, hearing will result in death or serious injury. -
Page 11: Operation
carpets or plastic truck bed liners may insulate DANGER the container and slow the loss of any static charge. In certain conditions gasoline is extremely • When practical, remove gas powered flammable and highly explosive. equipment from the truck or trailer and refuel the equipment with its wheels on the ground. - Page 12 o Before leaving the operator position WARNING • Never mow with the discharge deflector raised, removed or altered unless there is a grass Operating engine parts, especially the muffler, collection system or mulch kit in place and become extremely hot. Severe burns can occur working properly.
-
Page 13: Slope Operation
SLOPE OPERATION MAINTENANCE AND STORAGE • Use extreme caution when mowing and/or turning Before any maintenance, disengage drives, on slopes as loss of traction and/or tip-over could lower implement, set parking brake, stop engine occur. The operator is responsible for the safe and remove key or disconnect spark plug wire. - Page 14 DANGER WARNING Charging or jump starting the battery may Removing standard, original equipment produce explosive gasses. Battery gases parts and accessories may alter the can explode causing serious injury. warranty, traction, and safety of the machine. Unauthorized changes to the •...
-
Page 15: Safety And Instructional Decals
SAFETY AND INSTRUCTIONAL • New safety signs may be obtained from DECALS your authorized Worldlawn equipment • Keep all safety signs legible. Remove all dealer. grease, dirt and debris from safety signs • Safety signs may be affixed by peeling off and instructional labels. - Page 16 CONSOLE DECAL – 463043 463551 463550 463577 CLUTCH ON CLUTCH OFF FAST SLOW NEUTRAL REVERSE PARK BRAKE CHOKE...
-
Page 17: Specifications
SPECIFICATIONS TRANSMISSION Two Parker HTE Transaxles • Hydraulic Oil: Lubed for life MODEL NUMBER • Speed: 0-8.0 mph Fwd 0-5.0 mph Reverse WYS32FS600VL WYS32FS600VLCA CUTTING DECK WYS36FS600VL • Cutting Width: 32” & 36” WYS36FS600VLCA • Discharge: Side • Blade Size: 16” & 18” (2 ea) WEIGHT &... -
Page 18: Operation
PARK BRAKE LEVER OPERATION Located on right side of unit OPERATOR CONTROLS To engage the brake, pull the lever rearward. STEERING AND MOTION CONTROL: To release, push the lever forward. The motion control levers control the forward and reverse rotation of the respective tire. When parking on a steep slope, the wheels Speed is proportional to amount the levers are must be chocked or blocked in addition to the... -
Page 19: Drive Wheel Release Valves
DRIVE WHEEL RELEASE VALVES PRE-START Located on the front face of the hydrostatic Fill fuel tank on level ground. For best results case. use only clean, fresh regular grade unleaded gasoline with an octane rating of 87 or higher. IMPORTANT: Never use methanol, gasoline containing methanol, gasohol containing more than 10% ethanol, premium gasoline, or white gas because the fuel system could... -
Page 20: Operating Instructions
BLADE ENGAGEMENT OPERATING DANGER INSTRUCTIONS The rotating blades under the mower deck STARTING THE ENGINE are dangerous. Blade contact can cause 1. Move both control levers to the neutral serious injury or kill you. position. Do Not put hands or feet under the mower 2. -
Page 21: Disengaging The Blades
DISENGAGING THE BLADES DRIVING FORWARD 1. Set the throttle midway between the 1. Move one motion control lever into the “SLOW” and “FAST” positions. neutral operate position. 2. Push down on the PTO switch to disengage 2. Release the parking brake. the blades. -
Page 22: Operating The Machine With The Platform Up
OPERATING THE MACHINE WITH THE WARNING PLATFORM DOWN Operating the machine with the platform down The operator platform is heavy and may is recommended when: cause injury when lowering and raising the operator platform. The platform may • Mowing most areas suddenly drop if not supported when the •... -
Page 23: Transporting
Lift link shown in high range TRANSPORTING TRANSPORTING A UNIT Use a heavy-duty trailer or truck to transport the machine. Lock brake and block wheels. Securely fasten the machine to the trailer or truck with straps, chains, cable, or ropes. Be sure that the trailer or truck has all necessary lighting and marking as required by law. -
Page 24: Loading A Unit
• and the trailer or truck do not exceed 20 Do Not exceed a 20 degree angle degrees. A steeper angle may cause mower between ramp and ground or between deck components to get caught as the unit ramp and trailer or truck. •... -
Page 25: Maintenance
MAINTENANCE Note: The left and right side of the machine is determined by standing in the normal operator’s position. WARNING WARNING Remove the key from the ignition switch, Allow the engine to cool completely before engage parking brake, and pull the wire(s) service or making repairs around the engine off the spark plug(s) before you do any area. -
Page 26: Recommended Maintenance Schedule(S)
RECOMMENDED MAINTENANCE SCHEDULE(S) Maintenance Service Interval Maintenance Procedure • Before each use or daily Check the engine oil level • Check the mower blades • Check the safety interlock system • Check for loose hardware • Check for belt obstructions •... -
Page 27: Check Engine Oil Level
CHECK ENGINE OIL LEVEL Check the voltage of the battery with a digital voltmeter. Locate the voltage reading of the battery Check the engine oil daily before starting the in the table and charge the battery for the engine otherwise shortage of the engine oil may recommended time interval to bring the charge up cause serious damage to the engine such as to a full charge of 12.6 volts or greater. -
Page 28: Raise The Cushion For Rear Access
the same rated system voltage. These instructions DANGER are for negative ground systems only. Jump starting a weak battery that is cracked, Connect the positive (+) cable to the positive frozen, has low electrolyte level, or an (+) terminal of the discharged battery. open/shorted battery cell, can cause an 4. -
Page 29: Check Mower Blades
CHECK MOWER BLADES CHECK SAFETY INTERLOCK SYSTEM Service Interval: Before each use or daily Service Interval: Before each use or daily Stop engine, wait for all moving parts to stop, and CAUTION remove key. Engage parking brake. It is essential that operator safety 1. -
Page 30: Check For Loose Hardware
10. With control levers in neutral position, release CHANGE ENGINE OIL park brake, engine should stop. Return park Service Interval: 100 hours brake to “ON” position. NOTE: Change oil and filter after first eight 11. Restart engine. With control levers in neutral position, pull PTO switch to “ON”... -
Page 31: Check Hydraulic Oil Level
CHECK HYDRAULIC OIL LEVEL Lubrication Chart Stop engine, wait for all moving parts to stop and NUMBER remove key. Engage parking brake. FITTING INITIAL SERVICE LOCATIONS PUMPS INTERVAL The transaxles are lubed for life. No maintenance PLACES should be required. 1. -
Page 32: Check Spark Plugs
CHECK SPARK PLUGS THREAD LOCKING ADHESIVES Thread locking adhesives such as “Loctite 242” or Service Interval: As required “Fel-Pro, Pro-lock nut type” are used on the Remove spark plugs, check condition and reset following fasteners: gaps, or replace with new plugs. See Engine Owner’s Manual. -
Page 33: Adjustments
MOWER DECK DRIVE BELT TENSION ADJUSTMENTS Self-tensioning – No adjustment necessary. Note: Disengage PTO, shut off engine, wait for all PARK BRAKE ADJUSTMENT moving parts to stop, engage parking brake, and remove key before servicing, cleaning, or making If the parking brake does not hold securely, and any adjustments to the unit. -
Page 34: Neutral Adjustment
NEUTRAL ADJUSTMENT CASTER PIVOT BEARINGS PRE-LOAD AND The hydraulic pumps contain a return to neutral LUBRICATION mechanism (RTN) which returns the hydraulic Tighten the nut until it is snug then back it off 1/8- pump to the neutral position when the operator 1/4 turn. -
Page 35: Cleaning
CLEAN DEBRIS FROM MACHINE CLEANING Service Interval: Before each use or daily Service Interval: Before each use or daily 1. Stop engine, wait for all moving parts to (May be required more often in dry or dirty stop, and remove key. Engage parking conditions.) brake. -
Page 36: Troubleshooting
TROUBLESHOOTING IMPORTANT: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use. When a problem occurs, do not overlook the simple causes. For example, starting problems could be caused by an empty fuel tank. The following table lists some of the common causes of trouble. -
Page 37: Wiring Schematics
WIRING SCHEMATICS... -
Page 38: Evaporative Emission Control Warranty Statement
MANUFACTURER'S WARRANTY COVERAGE: This evaporative emission control system is warranted for two years. If any evaporative emission- related part on your equipment is defective, the part will be repaired or replaced by Worldlawn Power Equipment. OWNER'S WARRANTY RESPONSIBILITIES: •... - Page 39 If the part fails prior to the first scheduled replacement, the part must be repaired or replaced by Worldlawn Power Equipment. Any such part repaired or replaced under warranty must be warranted for a time not less than the remainder of the period prior to the first scheduled replacement point for the part.
-
Page 40: Limited Warranty
, without limitation, any implied warranty of merchantability or fitness for a particular use, and is in lieu of any and all other obligations or liability on Worldlawn’s part. Under any and all circumstances, Worldlawn’s total liability to the owner for any and all claims, losses or damages, including loss of profits, arising out of any cause whatsoever, whether based in contact, negligence or other tort, strict liability breach of warranty or otherwise, shall in no event exceed the purchase price of the mower. - Page 44 ALL RIGHTS RESERVED COMPACT VENOM OPERATORS MANUAL 933284 CONTENTS SUBJECT TO CHANGE STANDON 201703...