Fuse Locations - Briggs & Stratton SnapperPRO S800X Series Operator's Manual

Regular Maintenance

Fuse Locations

The fuse blocks are located on the side of the instrument
control panel installed in the right hand fuel tank. Refer to
Figure 55 for the location and amperage of the fuses used in
this machine.
A. Charge Circuit: 20 amp fuse
B. Actuator: 30 amp fuse
C. Accessory: 20 amp fuse
D. Auxillary: 20 amp fuse
E. Main: 40 amp fuse
F. Spare: 20 amp fuse
G. PTO Clutch: 20 amp fuse
H. Fuel Solenoid: 10 amp fuse
48 48
A
B
F
E
Figure 55. Fuse Location Decal
A. Charge Circuit
B. Actuator
C. Accessory
D. Auxillary
E. Main
F. Spare
G. PTO Clutch
H. Fuel Solenoid
D
C
H
G
www.SnapperPro.com www.SnapperPro.com