<3>
<8>
<9>
2-8. Installation of the stays
(1) Remove the bracket (No.3) after installing the machine head.
(2) Fix the stay (right) (No.1) with the socket bolts (No.4), the flat washers (No.5), and the screws (No.6).
(3) Attach the stay (left) (No.2) to the other side by the same procedure.
<6>
<3>
<4>
<5>
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
<2>
<1>
<6>
<1>
<4>
<5>
<7>
<1>: Stay (right)
<2>: Stay (left)
<3>: Bracket
<4>: Socket bolt (two bolts)
<5>: Flat washer (2 washers)
<6>: Screw (3 screws)
<2>
- 5 -
<1>: Hinge shaft (two shafts)
<2>: Set screw (two screws)
<3>: Hinge (two hinges)
<4>: Hinge rubber (two rubbers)
<5>: Support plate (two plates)
<6>: Socket bolt (four bolts)
<7>: Flat washer (four washers)
<8>: Head rest
<9>: Safety socket bolt (four bolts)