RAM Commercial CHASSIS CAB 2022 Owner's Manual

Table of Contents

Quick Links

Download this manual

2022 CHASSIS CAB

OWNER'S MANUAL

Table of Contents

Need help?

Do you have a question about the CHASSIS CAB 2022 and is the answer not in the manual?

Questions and answers

Summary of Contents for RAM Commercial CHASSIS CAB 2022

Page 1 2022 CHASSIS CAB OWNER’S MANUAL...
Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment described in this manual that are not on this vehicle.
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ..........................9 GETTING TO KNOW YOUR VEHICLE ..................15 GETTING TO KNOW YOUR INSTRUMENT PANEL ............74 STARTING AND OPERATING ....................105 MULTIMEDIA ..........................190 SAFETY ............................259 IN CASE OF EMERGENCY ...................... 311 SERVICING AND MAINTENANCE ..................328 TECHNICAL SPECIFICATIONS ....................
Page 4 INTRODUCTION DRIVER ADJUSTABLE PEDALS — DOORS ..............24 Manual Door Locks ..........24 IF EQUIPPED ............37 SYMBOLS KEY............10 Power Door Locks — If Equipped ....24 MIRRORS ............... 38 VAN CONVERSIONS/CAMPERS......10 Keyless Enter ‘n Go™ — Passive Entry Inside Rearview Mirror........38 VEHICLE MODIFICATIONS/ALTERATIONS..
Page 5 GETTING TO KNOW YOUR EXTERIOR LIGHTS..........47 CLIMATE CONTROLS ..........54 Headlight Switch..........47 Automatic Climate Control Descriptions And INSTRUMENT PANEL Multifunction Lever ..........47 Functions ............54 BASE / MIDLINE INSTRUMENT CLUSTER — Daytime Running Lights (DRLs) ......48 Manual Climate Control Descriptions And GASOLINE ...............
Page 6 FOUR-WHEEL DRIVE OPERATION — ONBOARD DIAGNOSTIC SYSTEM — OBD II ..103 NORMAL OPERATION — DIESEL ENGINE..113 Onboard Diagnostic System (OBD II) Cold Weather Precautions......114 IF EQUIPPED ............132 Cybersecurity ..........103 Engine Idling ..........115 Electronically Shifted Transfer Case EMISSIONS INSPECTION AND MAINTENANCE Noise ..............
Page 7 MULTIMEDIA LANESENSE — IF EQUIPPED ......156 TRAILER TOWING..........173 LaneSense Operation ........156 Common Towing Definitions......173 UCONNECT SYSTEMS .........190 Turning LaneSense On Or Off....... 157 Trailer Hitch Type and Maximum Trailer CYBERSECURITY ..........190 LaneSense Warning Message...... 157 Weight ............176 UCONNECT SETTINGS .........191 Changing LaneSense Status ......
Page 8 SAFETY IN CASE OF EMERGENCY CONNECTED SERVICES FAQS ......247 Connected Services SOS FAQs — SAFETY FEATURES..........259 HAZARD WARNING FLASHERS ......311 If Equipped ............ 248 Anti-Lock Brake System (ABS) ..... 259 ASSIST AND SOS SYSTEM — IF EQUIPPED ..312 Connected Services Remote Door Lock/ Electronic Brake Control (EBC) System ..
Page 9 SERVICING AND MAINTENANCE Intervention Regeneration Strategy — STORING THE VEHICLE ........393 Message Process Flow ........ 350 BODYWORK............393 SCHEDULED SERVICING — GASOLINE Diesel Exhaust Fluid (DEF) ......351 Protection From Atmospheric Agents ..393 ENGINE..............328 Body Lubrication ........... 351 Body And Underbody Maintenance ..... 394 Maintenance Plan –...
Page 10 FUEL REQUIREMENTS – DIESEL ENGINE ..401 IF YOU NEED ASSISTANCE ........ 409 MOPAR® PARTS ..........411 Fuel Specifications ........401 FCA US LLC Customer Center....... 409 REPORTING SAFETY DEFECTS ......411 Biodiesel Fuel Requirements ....... 401 FCA Canada Inc. Customer Center....409 In The 50 United States And FLUID CAPACITIES ..........403 Mexico............
Page 11: Introduction
INTRODUCTION Dear Customer, Congratulations on the purchase of your new Ram. Be assured that it represents precision workmanship, distinctive styling, and high quality. This is a specialized utility vehicle. It can go places and perform tasks that are not intended for conventional passenger vehicles. It handles and maneuvers differently from many passenger vehicles both on-road and off-road, so take time to become familiar with your vehicle.
Page 12: Symbols Key
SYMBOLS KEY VAN CONVERSIONS/CAMPERS These statements are against operating The New Vehicle Limited Warranty does not apply to body modifications or special equipment installed by van conversion/camper manufacturers/body WARNING! procedures that could result in a collision, bodily builders. US residents refer to the Warranty Information, Section 2.1.C. injury and/or death.
Page 13: Symbol Glossary
SYMBOL GLOSSARY Red Warning Lights Some car components have colored labels with symbols indicating Electric Power Steering (EPS) Fault Warning Light precautions to be observed when using this component. It is important to Ú page 97 follow all warnings when operating your vehicle. See below for the definition of each symbol Ú...
Page 14 Red Warning Lights Yellow Warning Lights Vehicle Security Warning Light LaneSense Warning Light Ú page 96 Ú page 98 Low Washer Fluid Warning Light Yellow Warning Lights Ú page 98 Adaptive Cruise Control (ACC) Fault Warning Light Low Fuel Warning Light Ú...
Page 15 Yellow Warning Lights Yellow Indicator Lights Tire Pressure Monitoring System (TPMS) Warning Light 4WD Lock Indicator Light Ú page 99 Ú page 101 4WD Low Indicator Light Yellow Indicator Lights Ú page 101 Cargo Light 4WD High Indicator Light Ú page 100 Ú...
Page 16 Green Indicator Lights Green Indicator Lights Adaptive Cruise Control (ACC) Set With Target Light Turn Signal Indicator Lights Ú page 101 Ú page 102 Adaptive Cruise Control (ACC) Set With No Target Detected Indicator Light White Indicator Lights Ú page 101 Adaptive Cruise Control (ACC) Ready Light Automatic Diesel Exhaust Brake Indicator Light Ú...
Page 17: Getting To Know Your Vehicle
GETTING TO KNOW YOUR VEHICLE KEYS In case the ignition switch does not change with the push of a button, the key fob may have a low or fully depleted battery. A low key fob battery can be verified by referring to the instrument cluster, Your vehicle is equipped with a key fob which which will display directions to follow Ú...
Page 18 GETTING TO KNOW YOUR VEHICLE Key Left Vehicle Feature Perchlorate Material — special handling may 2. Hold the key fob with the button side facing  apply. See www.dtsc.ca.gov/hazardouswaste/ down, and locate the small rectangular gap on If a valid key fob is no longer detected inside the perchlorate for further information.
Page 19 GETTING TO KNOW YOUR VEHICLE NOTE: 7. Reinsert the emergency key until it locks into Programming And Requesting Additional When replacing the battery, ensure the (+) sign on place. Key Fobs the battery is facing upward. Avoid touching the Programming the key fob may be performed by an NOTE: new battery with your fingers.
Page 20: Sentry Key
GETTING TO KNOW YOUR VEHICLE NOTE: with the vehicle electronics, the engine will start will illuminate when in position. The three positions and shut off after two seconds. are OFF, ACC, and ON/RUN. The fourth position is When having the Sentry Key Immobilizer system ...
Page 21 GETTING TO KNOW YOUR VEHICLE The push button ignition can be placed in the Put the nose side (side opposite of the emergency WARNING! following modes: key) of the key fob against the START/STOP ignition button and push to operate the ignition Allowing children to be in a vehicle unattended ...
Page 22: Remote Start - If Equipped (Gasoline)
GETTING TO KNOW YOUR VEHICLE REMOTE START — IF EQUIPPED The ignition must be placed in the ON/RUN posi- EMOTE TART  tion before the Remote Start sequence can be (GASOLINE) Push and release the Remote Start button on the repeated for a third cycle.
Page 23: To Exit Remote Start Mode
GETTING TO KNOW YOUR VEHICLE system will automatically adjust the settings cabin. If the front defrost timer expires, the EMOTE TART depending on ambient conditions. See “Remote vehicle will enter Mix Mode. To drive the vehicle after starting the Remote Start Start Comfort Systems —...
Page 24: Remote Start Abort Message
GETTING TO KNOW YOUR VEHICLE NOTE: Brake switch inactive (brake pedal not pressed) EMOTE TART BORT ESSAGE  Obstructions between the vehicle and the key Battery at an acceptable charge level   The following messages will display in the fob may reduce this range.
Page 25: Vehicle Security System - If Equipped
GETTING TO KNOW YOUR VEHICLE VEHICLE SECURITY SYSTEM — IF EQUIPPED Push the lock button on the exterior Passive The Vehicle Security system is designed to protect  Entry door handle with a valid key fob avail- your vehicle. However, you can create conditions The Vehicle Security system monitors the vehicle able in the same exterior zone Ú...
Page 26: Doors
GETTING TO KNOW YOUR VEHICLE DOORS WARNING! WARNING! Do not leave children or animals inside parked Do not leave the key fob in or near the vehicle, ANUAL OCKS   vehicles in hot weather. Interior heat buildup or in a location accessible to children, and do The power door locks can be manually locked from may cause serious injury or death.
Page 27: Keyless Enter N G O Passive Entry
GETTING TO KNOW YOUR VEHICLE The driver’s door will unlock automatically if the If wearing gloves or if it has been raining/  keys are detected inside the vehicle when the door snowing on the Passive Entry door handle, the lock button on the front door panel is used to lock unlock sensitivity can be affected, resulting in a the door.
Page 28: I F Equipped
GETTING TO KNOW YOUR VEHICLE — the inside and outside of the vehicle for any valid UTOMATIC NLOCK OORS Passive Entry key fobs. If one of the vehicle's QUIPPED Passive Entry key fobs is detected inside the vehicle, and no other valid Passive Entry key fobs The doors will unlock automatically on vehicles are detected outside the vehicle, the Passive Entry with power door locks after the following sequence...
Page 29: Child-Protection Door Lock - If Equipped
GETTING TO KNOW YOUR VEHICLE — HILD ROTECTION WARNING! QUIPPED Avoid trapping anyone in the vehicle in a To provide a safer environment for children riding collision. Remember that the rear doors cannot be opened from the inside door handle when the in the rear seat, the rear doors (if equipped) of your Child Protection Door Locks are engaged.
Page 30: Heated Steering Wheel - If Equipped
GETTING TO KNOW YOUR VEHICLE — EATED TEERING HEEL WARNING! QUIPPED Persons who are unable to feel pain to the  skin because of advanced age, chronic illness, The steering wheel contains a heating element that helps warm your hands in diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical cold weather.
Page 31: Get Started
GETTING TO KNOW YOUR VEHICLE Notice the visual cues that inform you of your voice DDITIONAL NFORMATION recognition system’s status. Cues appear on the © 2021 FCA US LLC. All rights reserved. Mopar and touchscreen. Uconnect are registered trademarks and Mopar NOTE: Owner Connect is a trademark of FCA US LLC.
Page 32: Programming The Memory Feature
GETTING TO KNOW YOUR VEHICLE The driver memory settings switch is located on the 3. Push the set (S) button on the memory switch, 5. Push and release the lock button on the key driver door, next to the door handle, and consists and then push the desired memory button (1 fob within 10 seconds.
Page 33: Seats
GETTING TO KNOW YOUR VEHICLE SEATS Manual Front Seat Recline Adjustment The recline lever is located on the outboard side of Seats are a part of the Occupant Restraint system the seat. To recline the seat, lean forward slightly, of the vehicle. lift the lever, lean back to the desired position and release the lever.
Page 34: Power Driver Seat Adjustment
GETTING TO KNOW YOUR VEHICLE 40-20-40 Front Bench Seat — If Equipped Adjusting The Seat Forward Or Rearward WARNING! The seat is divided into three segments. The The seat can be adjusted both forward and Adjusting a seat while driving may be ...
Page 35: Heated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE — I Power Lumbar — If Equipped When you place the ignition in the OFF position, EATED EATS QUIPPED  the driver’s seat will move about 2.4 inches Vehicles equipped with power driver or passenger On some models, the front and rear seats may be (60 mm) rearward if the driver’s seat position is seats may also be equipped with power lumbar.
Page 36: Ventilated Seats - If Equipped
GETTING TO KNOW YOUR VEHICLE — I Front Heated Seats Rear Heated Seats ENTILATED EATS QUIPPED The heated seats control buttons are On some models, the two outboard rear Front Ventilated Seats located on the center instrument panel seats are equipped with heated seats. The Located in the seat cushion are small below the touchscreen, and are also heated seat switches for these seats are...
Page 37: Head Restraints
GETTING TO KNOW YOUR VEHICLE Front Head Restraints NOTE: ESTRAINTS Four-way head restraints have seven tilt/locking Four-Way Head Restraints — If Equipped Head restraints are designed to reduce the risk of positions. When pulling fully forward, the head Your vehicle may be equipped with front four-way injury by restricting head movement in the event of restraint will spring back to the untilted, rearward driver and passenger head restraints.
Page 38 GETTING TO KNOW YOUR VEHICLE WARNING! WARNING! All occupants, including the driver, should not A loose head restraint thrown forward in a   operate a vehicle or sit in a vehicle’s seat until collision or hard stop could cause serious the head restraints are placed in their proper injury or death to occupants of the vehicle.
Page 39: Driver Adjustable Pedals
GETTING TO KNOW YOUR VEHICLE Rear Head Restraint Removal and accelerator pedals to move toward or away NOTE: from the driver to provide improved position with Always adjust the pedals to a position that To remove the head restraint, push the adjustment ...
Page 40: Mirrors
GETTING TO KNOW YOUR VEHICLE MIRRORS This mirror automatically adjusts for headlight button with a counterclockwise rotation and glare from vehicles behind you. requires no tools for mounting. The mirror head can be adjusted up, down, left, and right for NSIDE EARVIEW IRROR...
Page 41: Illuminated Vanity Mirror - If Equipped
GETTING TO KNOW YOUR VEHICLE — Digital Rearview Mirror — If Equipped Push the menu button next to the on/off control to LLUMINATED ANITY IRROR access the following mirror options: The Digital Rearview Mirror provides a high QUIPPED Brightness definition, wide and unobstructed view of the road ...
Page 42: Outside Mirrors
GETTING TO KNOW YOUR VEHICLE — I “Slide-On-Rod” Features Of Sun Visor — UTSIDE IRRORS OWER IRRORS QUIPPED If Equipped To receive maximum benefit, adjust the outside The controls for the power mirrors are located on The sun visor “Slide-On-Rod” feature allows for mirrors to center on the adjacent lane of traffic the driver's door trim panel.
Page 43: Power Folding Outside Mirrors For Standard And Trailer Tow - If Equipped
GETTING TO KNOW YOUR VEHICLE Using the mirror control switch, push on any of the If the mirror does not fold automatically, check for To reset the power folding mirrors: Fold and unfold four arrows for the direction that you want the ice or dirt buildup at the pivot area, which can them by pushing the button (this may require mirror to move.
Page 44: Trailer Towing Mirrors
GETTING TO KNOW YOUR VEHICLE — I To return the control to the large mirror, push the EATED IRRORS QUIPPED Power Convex Mirror Switch a second time. These mirrors are heated to melt frost or ice. This feature will be activated whenever you turn on the rear window defroster (if equipped) Ú...
Page 45: Outside Mirrors Folding Feature
GETTING TO KNOW YOUR VEHICLE UNIVERSAL GARAGE DOOR OPENER To operate HomeLink®, push and release any UTSIDE IRRORS OLDING EATURE  of the programmed HomeLink® buttons. These (HOMELINK®) — IF EQUIPPED All outside mirrors are designed to be able to be buttons will activate the devices they are manually folded both forward and rearward to programmed to with each press of the corre-...
Page 46: Erasing All The Home Link Channels
GETTING TO KNOW YOUR VEHICLE ® not be immediately visible when looking at the 3. Push and hold the HomeLink® button you RASING device. The name and color of the button may vary want to program while you push and hold the HANNELS slightly by manufacturer.
Page 47: Miscellaneous Device
GETTING TO KNOW YOUR VEHICLE ® T 3. Push the programmed HomeLink® button to 2. Push and hold the desired HomeLink® button ROGRAMMING confirm that the garage door opener motor until the HomeLink® Indicator light begins to ISCELLANEOUS EVICE operates. If the garage door opener motor flash after 20 seconds.
Page 48: Canadian/Gate Operator Programming
GETTING TO KNOW YOUR VEHICLE 3. Continue to press and hold the HomeLink® Reprogramming A Single HomeLink® Button Push the LEARN button on the Garage Door  button, while you press and release (cycle) (Canadian/Gate Operator) Opener to complete the training for a Rolling your hand-held transmitter every two seconds Code.
Page 49: Exterior Lights
GETTING TO KNOW YOUR VEHICLE EXTERIOR LIGHTS To turn on the headlights, rotate the headlight switch clockwise. When the headlight switch is on, the parking lights, taillights, license plate light and EADLIGHT WITCH instrument panel lights are also turned on. To turn The headlight switch is located on the left side of off the headlights, rotate the headlight switch back the instrument panel.
Page 50: Daytime Running Lights (Drls)
GETTING TO KNOW YOUR VEHICLE (DRL To opt out of the Automatic High-Beam Sensi- AYTIME UNNING IGHTS UTOMATIC EADLAMP  tivity Control (default) and enter Reduced — I ONTROL QUIPPED The Daytime Running Lights (DRLs) come on High-Beam Sensitivity Control (not recom- whenever the engine is running, and the low mended), toggle the multifunction lever six full The Automatic High Beam Headlamp Control...
Page 51: Directional Led Headlamp System
GETTING TO KNOW YOUR VEHICLE LED H NOTE: IRECTIONAL EADLAMP EADLIGHT ELAY For vehicles sold in Canada, the first headlight — I YSTEM QUIPPED To assist when exiting the vehicle, the headlight switch position is the parking lights and instrument delay feature will leave the headlights on for up to panel lights position (instead of the OFF position).
Page 52: Front Fog Lights - If Equipped
GETTING TO KNOW YOUR VEHICLE — I RONT IGHTS QUIPPED IGNALS To activate the front fog lights, turn on the parking Move the multifunction lever up or down to lights or low beam headlights and push the fog activate the turn signals. The arrows on each side light switch located within the headlight switch.
Page 53: Battery Saver
GETTING TO KNOW YOUR VEHICLE transmission is in PARK, NEUTRAL, or REVERSE. vehicle is equipped with Remote Keyless Entry, The trailer spotter lights will turn off when the and the unlock button is pushed on the key fob, the vehicle transmission is placed in DRIVE. courtesy, dome, and cargo lights will turn on.
Page 54: Illuminated Entry
GETTING TO KNOW YOUR VEHICLE NOTE: LLUMINATED NTRY The Rear Courtesy/Reading Lights will remain on The courtesy lights will turn on when you use the until the switch is pushed a second time, so be key fob to unlock the doors (if the vehicle is sure they have been turned off before exiting the equipped with remote power door locks) or open vehicle.
Page 55: Windshield Wipers And Washers
GETTING TO KNOW YOUR VEHICLE WINDSHIELD WIPERS AND WASHERS Intermittent Wipers To prevent freeze-up of your windshield washer system in cold weather, select a solution or mixture The intermittent feature of this system was The windshield wiper/washer controls are located that meets or exceeds the temperature range of designed for use when weather conditions make a on the multifunction lever on the left side of the...
Page 56: Rain Sensing Wipers - If Equipped
GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS — I The Rain Sensing system has protection features ENSING IPERS QUIPPED for the wiper blades and arms, and will not operate This feature senses rain or snowfall on the The Climate Control system allows you to regulate under the following conditions: windshield and automatically activates the wipers.
Page 57 GETTING TO KNOW YOUR VEHICLE A/C Button In cold weather, use of Recirculation mode may lead to excessive window fogging. The Press and release this button on the Recirculation feature may be unavailable if touchscreen, or push the button on the conditions exist that could create fogging on the faceplate to change the current setting.
Page 58 GETTING TO KNOW YOUR VEHICLE SYNC Button blower level may increase. Use Defrost mode with CAUTION! maximum temperature settings for best Press the SYNC button on the windshield and side window defrosting and Keep all objects a safe distance from the ...
Page 59 GETTING TO KNOW YOUR VEHICLE Touchscreen Panel Mode Floor Mode Use the small blower icon to reduce the blower Air comes from the outlets in the Air comes from the floor outlets. A slight setting and the large blower icon to increase the instrument panel.
Page 60: Manual Climate Control Descriptions And Functions
GETTING TO KNOW YOUR VEHICLE MAX A/C Setting On vehicles equipped with the Manual Climate ANUAL LIMATE ONTROL Controls system, the Recirculation mode is not Set the temperature control knob to the ESCRIPTIONS UNCTIONS allowed in Defrost mode to improve window MAX A/C setting to change the current clearing operation.
Page 61 GETTING TO KNOW YOUR VEHICLE Blower Control Bi-Level Mode CAUTION! Blower Control regulates the amount of Air comes from the instrument panel Failure to follow these cautions can cause air forced through the climate control outlets and floor outlets. A slight amount damage to the heating elements: system.
Page 62: Automatic Temperature Control (Atc)
GETTING TO KNOW YOUR VEHICLE To provide you with maximum comfort in the UTOMATIC EMPERATURE ONTROL PERATING Automatic mode during cold start-ups, the blower (ATC) NOTE: fan will remain on low until the engine warms up. Refer to the chart at the end of this section for The blower will increase in speed and transition Automatic Operation suggested control settings for various weather...
Page 63: Interior Storage And Equipment
GETTING TO KNOW YOUR VEHICLE INTERIOR STORAGE AND EQUIPMENT Window Fogging Operating Tips Chart Vehicle windows tend to fog on the inside in mild, WEATHER CONTROL SETTINGS TORAGE rainy, and/or humid weather. To clear the Set the mode control to windows, select Defrost or Mix mode and increase Glove Compartment (Panel Mode),...
Page 64 GETTING TO KNOW YOUR VEHICLE If equipped with a covered upper glove compartment, push the release button to open. To open the lower glove compartment, pull the release handle. WARNING! Do not operate this vehicle with a glove compartment in the open position. Driving with the glove compartment open may result in injury in a collision.
Page 65 GETTING TO KNOW YOUR VEHICLE With the upper lid closed, pull the lower handle to Premium Center Console — If Equipped open the lower storage bin. The lower bin contains The premium center console is equipped with two a power inverter. There is also a “fill line” located front storage bins located in front of the center along the rear inside wall of the lower bin.
Page 66 GETTING TO KNOW YOUR VEHICLE Overhead Sunglass Storage At the front of the overhead console, a compartment is provided for the storage of one pair of sunglasses. From the closed position, push the door latch to open the compartment. Front Bench Seat Storage Location Storage Drawer Access Button Seatback Storage —...
Page 67 GETTING TO KNOW YOUR VEHICLE Storage Bin (Regular Cab) Unfolding The Load Floor/Crew Cab 3. Lift the front panel until the load floor unfolds into position. 1. Lift the 60/40 seat cushion(s) to the upward The storage bin is located behind the front seats position.
Page 68: Usb/Aux Control
GETTING TO KNOW YOUR VEHICLE USB/AUX C Below Rear Seat Storage (Crew Cab) 3. Lift the load floor up to access storage under ONTROL the load floor. The Crew Cab models provide additional storage Located on the center stack, just below the under the rear seats.
Page 69 GETTING TO KNOW YOUR VEHICLE Third and fourth USB ports are located behind the If equipped, your vehicle may also contain a USB center console, above the power inverter. These port located on the top tray of the vehicle’s center USB ports are charge only.
Page 70: Electrical Power Outlets
GETTING TO KNOW YOUR VEHICLE NOTE: Power Outlet Fuse Locations: CAUTION! Plugging in a phone or another USB device may F104 Fuse 20 A Yellow UCI Port/ USB Rear  cause the connection to a previous device to be Power outlets are designed for accessory ...
Page 71: Power Inverter - If Equipped
GETTING TO KNOW YOUR VEHICLE — I All power inverters are designed with built-in OWER NVERTER QUIPPED CAUTION! overload protection. If the power rating of If equipped, a 115 Volt (400 Watts Maximum) 400 Watts is exceeded, the power inverter shuts Many accessories that can be plugged in draw ...
Page 72: Wireless Charging Pad - If Equipped
GETTING TO KNOW YOUR VEHICLE Your mobile phone must be designed for Qi WARNING! wireless charging. If the phone is not equipped with Qi wireless charging functionality, an Close the lid when not in use.  aftermarket sleeve or a specialized back plate can If this outlet is mishandled, it may cause an ...
Page 73: Windows
GETTING TO KNOW YOUR VEHICLE WINDOWS this feature. The timing is programmable within Auto-Up Feature With Anti-Pinch Protection Uconnect Settings Ú page 191. Lift the window switch up for a short period of time — I OWER INDOWS QUIPPED and release; the window will go up automatically. WARNING! To stop the window from going all the way up The window controls on the driver's door control all...
Page 74: Reset Auto-Up
GETTING TO KNOW YOUR VEHICLE — ESET ANUAL LIDING INDOW QUIPPED Should the Auto-Up feature stop working, the window probably needs to be reset. To reset A locking device in the center of the window helps Auto-Up: to prevent entry from the rear of the vehicle. 1.
Page 75: Hood
GETTING TO KNOW YOUR VEHICLE HOOD 2. Reach into the opening beneath the center of LOSE the hood and push the safety latch lever to the Hoods equipped with gas props are closed from left to release it, before raising the hood. the point where the props no longer hold the hood open.
Page 76: Getting To Know Your Instrument Panel
GETTING TO KNOW YOUR INSTRUMENT PANEL BASE / MIDLINE INSTRUMENT CLUSTER — GASOLINE...
Page 77: Base / Midline Instrument Cluster
GETTING TO KNOW YOUR INSTRUMENT PANEL 5. Speedometer IDLINE NSTRUMENT LUSTER CAUTION! Indicates vehicle speed. ESCRIPTIONS  Driving with a hot engine cooling system could 6. Temperature Gauge 1. Tachometer damage your vehicle. If the temperature gauge The gauge pointer shows engine coolant ...
Page 78: Premium Instrument Cluster - Gasoline
GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER — GASOLINE...
Page 79: Premium Instrument Cluster Descriptions
GETTING TO KNOW YOUR INSTRUMENT PANEL 4. Temperature Gauge REMIUM NSTRUMENT LUSTER CAUTION! The gauge pointer shows engine coolant ESCRIPTIONS  Driving with a hot engine cooling system could temperature. The pointer positioned within 1. Tachometer damage your vehicle. If the temperature gauge the normal range indicates that the engine reads “H,”...
Page 80: Base / Midline Instrument Cluster - Diesel
GETTING TO KNOW YOUR INSTRUMENT PANEL BASE / MIDLINE INSTRUMENT CLUSTER — DIESEL...
Page 81: Diesel Instrument Cluster
GETTING TO KNOW YOUR INSTRUMENT PANEL 3. Instrument Cluster Display 7. Fuel Gauge IESEL NSTRUMENT LUSTER When the appropriate conditions exist, this The pointer shows the level of fuel in the   1. Tachometer display shows the instrument cluster fuel tank when the ignition switch is in the Indicates the engine speed in revolutions ...
Page 82: Premium Instrument Cluster - Diesel
GETTING TO KNOW YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER — DIESEL...
Page 83: Diesel Instrument Cluster
GETTING TO KNOW YOUR INSTRUMENT PANEL 5. Fuel Gauge allow the gauge to update after a period of run IESEL NSTRUMENT LUSTER time. Under very cold conditions, it is possible The pointer shows the level of fuel in the  1.
Page 84: Instrument Cluster Display And Controls
GETTING TO KNOW YOUR INSTRUMENT PANEL Down Arrow Button NSTRUMENT LUSTER ISPLAY  ONTROLS Push and release the down arrow button to scroll downward through the main menu items, The instrument cluster display features a driver submenu screen, and vehicle settings. interactive display that is located in the instrument Left Arrow Button ...
Page 85: Display Menu Items
GETTING TO KNOW YOUR INSTRUMENT PANEL Oil Life Reset Procedure 2. Fully press the accelerator pedal, slowly, three Speedometer times within ten seconds. 1. Without pushing the brake pedal, push the Push and release the up or down arrow 3. Without pushing the brake pedal, push the ENGINE START/STOP button and place the button until the speedometer menu item is ignition to the ON/RUN position (do not start...
Page 86 GETTING TO KNOW YOUR INSTRUMENT PANEL Off Road NOTE: Push the SET + or the SET- button (located on the steering wheel) and the following will display in the When vehicle speed becomes too high to display Push and release the up or down arrow instrument cluster display:...
Page 87 GETTING TO KNOW YOUR INSTRUMENT PANEL Fuel Economy Trailer Tow Audio Push and release the up or down arrow Push and release the up or down arrow Push and release the up or down arrow button until the Fuel Economy menu item is button until the Trailer Tow menu item is button until the Audio Menu icon/title is highlighted in the instrument cluster display.
Page 88 GETTING TO KNOW YOUR INSTRUMENT PANEL Screen Setup Menu Item NOTE: Center Menus with (Show/Hide) can push the right Push and release the up or down arrow None Outside Temp Compass arrow button to choose whether to show or hide button until the Screen Setup menu item is Range To this menu in the instrument cluster display.
Page 89 GETTING TO KNOW YOUR INSTRUMENT PANEL Restore Defaults Follow the prompts to display and set any of the Lower Left and Lower Right — If Equipped following Vehicle Settings. Cancel  Battery NOTE: Oil Pressure Restore  Temperature Voltage Your vehicle may be equipped with the following Settings —...
Page 90 GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Names Abbreviated Setting Names Submenus (Right Submenu Layer) (Left Submenu Layer) Flash Lights with Lock Lights w/ Lock On; Off Auto Lock Doors Auto Lock Doors On; Off Auto Unlock Doors Auto Unlock Doors On;...
Page 91 GETTING TO KNOW YOUR INSTRUMENT PANEL Setting Names Abbreviated Setting Names Submenus (Right Submenu Layer) (Left Submenu Layer) Trailer # (# is equal to slot position)  Boat   Cargo  Dump  Equipment  Flatbed  Trailer Name Trailer Name Gooseneck ...
Page 92: Diesel Messages And Warnings
GETTING TO KNOW YOUR INSTRUMENT PANEL Commercial Settings — If Equipped Perform Service — Your vehicle will require emis- IESEL ESSAGES ARNINGS  sions maintenance at a set interval. To help Commercial Settings allows the driver to set and Diesel Particulate Filter (DPF) Messages remind you when this maintenance is due, the recall additional features when the transmission is instrument cluster display will display “Perform...
Page 93 GETTING TO KNOW YOUR INSTRUMENT PANEL By simply driving your vehicle at highway speeds Exhaust Filter Full — Power Reduced See Engine Power Reduced During Warm-up — This   for as little as 45 minutes, you can remedy the Dealer —...
Page 94 GETTING TO KNOW YOUR INSTRUMENT PANEL Diesel Exhaust Fluid (DEF) Warning 5 MPH Max Speed on Restart, Long Idle or has experienced component failures, or when  Refuel Refill DEF — This message will continu- tampering has been detected. The vehicle may be Messages ously display when the counter reaches zero, limited to a maximum speed of 5 mph (8 km/h) if...
Page 95: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
GETTING TO KNOW YOUR INSTRUMENT PANEL detected in a time interval of less than 40 hours, Incorrect DEF Detected See Dealer — This When load reduction is activated, the message  “Battery Saver On Some Systems May Have the counter may restart at the value where it message will display when the fault is initially stopped when a previous fault was temporarily detected, each time the vehicle is started, and...
Page 96: Warning Lights And Messages
GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Loss of the battery charge may indicate one or What to do when an electrical load reduction more of the following conditions: action message is present (“Battery Saver On” or The warning/indicator lights will illuminate in the “Battery Saver Mode”) The charging system cannot deliver enough...
Page 97 GETTING TO KNOW YOUR INSTRUMENT PANEL Air Bag Warning Light been corrected. If the problem is related to the Vehicles equipped with the Anti-Lock Brake System brake booster, the ABS pump will run when (ABS) are also equipped with Electronic Brake This warning light will illuminate to applying the brake, and a brake pedal pulsation Force Distribution (EBD).
Page 98 GETTING TO KNOW YOUR INSTRUMENT PANEL Vehicle Security Warning Light — Battery Charge Warning Light Electronic Throttle Control (ETC) Warning If Equipped Light This warning light will illuminate when the battery is not charging properly. If it stays This light will flash at a fast rate for This warning light will illuminate to on while the engine is running, there may approximately 15 seconds when the...
Page 99: Yellow Warning Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Electric Power Steering (EPS) Fault ELLOW ARNING IGHTS WARNING! Warning Light Adaptive Cruise Control (ACC) Fault If you continue operating the vehicle when the This warning light will turn on when Warning Light — If Equipped Transmission Temperature Warning Light is there's a fault with the EPS system illuminated you could cause the fluid to boil over,...
Page 100 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Active Electronic Stability Control (ESC) OFF When the engine is running, the MIL may flash to alert serious conditions that could lead to Warning Light — If Equipped Warning Light — If Equipped immediate loss of power or severe catalytic This warning light will indicate when the This warning light indicates the ESC is off.
Page 101 GETTING TO KNOW YOUR INSTRUMENT PANEL Low Fuel Warning Light Should one or more tires be in the condition also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping mentioned above, the display will show the When the fuel level reaches indications corresponding to each tire.
Page 102: Yellow Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Cruise Control Fault Warning Light If the ABS light does not turn on when the ignition CAUTION! is placed in the ON/RUN or ACC/ON/RUN position, This warning light will illuminate to have the brake system inspected by an authorized The TPMS has been optimized for the original indicate the Cruise Control System is not dealer.
Page 103: Green Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Snowplow Mode Indicator Light — together forcing the front and rear wheels to rotate NOTE: at the same speed. Low range provides a greater The Wait To Start Light may not illuminate if the If Equipped gear reduction ratio to provide increased torque at intake manifold temperature is warm enough.
Page 104: White Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL Automatic Diesel Exhaust Brake Indicator Turn Signal Indicator Lights HITE NDICATOR IGHTS Light — If Equipped When the left or right turn signal is Adaptive Cruise Control (ACC) Ready activated, the turn signal indicator will This indicator light will illuminate when Light —...
Page 105: Blue Indicator Lights
GETTING TO KNOW YOUR INSTRUMENT PANEL making repairs. Although your vehicle will usually NDICATOR IGHTS WARNING! be drivable and not need towing, see an authorized High Beam Indicator Light dealer for service as soon as possible. ONLY an authorized service technician should ...
Page 106: Emissions Inspection And Maintenance
GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND 1. Cycle the ignition switch to the ON position, If your OBD II system is not ready, you should see but do not crank or start the engine. an authorized dealer or repair facility. If your MAINTENANCE PROGRAMS vehicle was recently serviced or had a battery NOTE:...
Page 107: Starting And Operating
STARTING AND OPERATING STARTING THE ENGINE— GASOLINE — R OTARY HIFTER AND WARNING! PEED RANSMISSION ENGINE Do not leave the key fob in or near the vehicle,  or in a location accessible to children, and do AutoPark is a supplemental feature to assist in Before starting your vehicle, adjust your seat, not leave the ignition of a vehicle equipped placing the vehicle in PARK should the situations...
Page 108 STARTING AND OPERATING If the vehicle is not in PARK and the driver exits the WARNING! WARNING! vehicle with the engine running, the vehicle may AutoPark. If vehicle speed is above 1.2 mph (1.9 km/h), the AutoPark is a supplemental feature. It is not ...
Page 109: Tip Start Feature
STARTING AND OPERATING NOTE: position. If vehicle speed drops below 1.2 mph TART EATURE Normal starting of either a cold or a warm engine is (1.9 km/h), the vehicle may AutoPark Do not press the accelerator. Place the ignition Ú page 105. obtained without pumping or pressing the accel- switch briefly to the START position and release it.
Page 110: Cold Weather Operation (Below -22°F Or −30°C)
STARTING AND OPERATING release the accelerator pedal and the brake pedal, If the engine has been flooded, it may start to run, The starter should not be operated for more than wait 10 to 15 seconds, then repeat the “Normal but not have enough power to continue running 25-second intervals.
Page 111: Automatic Transmission
STARTING AND OPERATING 4. If you wish to stop the cranking of the engine the ENGINE START/STOP button once will turn UTOMATIC RANSMISSION prior to the engine starting, remove your foot the engine off. The ignition will remain in the Start the engine with the transmission in the from the brake pedal and push the ENGINE ACC position.
Page 112: Extreme Cold Weather
STARTING AND OPERATING NOTE: 3. Push the ENGINE START/STOP button a 3. While the "Wait to Start" telltale is on, the second time to change the ignition to the RUN instrument cluster will additionally display a Engine idle speed will automatically increase to ...
Page 113: Normal Starting Procedure Engine Manifold Air Temperature Above 66°F (19°C)
STARTING AND OPERATING NOTE: 4. Place the ignition switch in the START position 1. The “Wait to Start” telltale will remain on for a The engine block heater cord is a factory installed and crank the engine. Do not press the period of time that varies depending on the accelerator during starting.
Page 114: Starting Procedure - Engine Manifold Air Temperature Below 0°F (-18°C)
STARTING AND OPERATING — E 4. After engine start-up, check that the Oil to Start” telltale turns off and the engine is TARTING ROCEDURE NGINE Pressure Warning Light has turned off. started, recycle the intake air heater by turning ANIFOLD EMPERATURE ELOW the ignition switch to the OFF position for at...
Page 115: Starting Fluids
STARTING AND OPERATING NORMAL OPERATION — DIESEL ENGINE TARTING LUIDS WARNING! Observe the following when the engine is Do not leave children or animals inside parked  WARNING! operating. vehicles in hot weather. Interior heat build-up Starting fluids or flammable liquids must never may cause serious injury or death.
Page 116: Cold Weather Precautions
STARTING AND OPERATING NOTE: Engine Oil Usage EATHER RECAUTIONS Use of Climatized ULSD or Number 1 ULSD Fuel  For the correct engine oil viscosity Ú page 341. Operation in ambient temperature below 32°F results in a noticeable decrease in fuel Winter Front Cover Usage (0°C) may require special considerations.
Page 117: Engine Idling
STARTING AND OPERATING Engine Warm-Up Vehicle speed is 0 mph (0 km/h). This operating mode may last for up to an hour of  idle time, or around 20 minutes of driving time. Applying the throttle will cancel fast idle. Avoid full throttle operation when the engine is ...
Page 118: Noise
STARTING AND OPERATING 1. With the transmission in PARK, the parking directly into the SCR through an dosing module. OISE brake applied, and the engine running, turn This process will create a clicking sound and at Diesel engines can create noises that may seem on the Cruise Control, then push the SET (-) times, will make noise even with the vehicle shut as a concern.
Page 119: Idle Shutdown
STARTING AND OPERATING HUTDOWN PERATING RECAUTIONS OOLING YSTEM Avoid Overheating The Engine This feature can be enabled so that the truck will To reduce potential for engine and transmission automatically shutdown when the truck has been overheating in high ambient temperature The temperature of the engine coolant (antifreeze: idling for a set period of time when the engine is at conditions, take the following actions:...
Page 120: Diesel Particulate Filter (Dpf) Manual Regeneration - If Equipped
STARTING AND OPERATING ENGINE BLOCK HEATER — IF EQUIPPED ENGINE BREAK-IN RECOMMENDATIONS — Do Not Operate The Engine With Failed Parts GASOLINE ENGINE The engine block heater warms the engine, and All engine failures give some warning before the permits quicker starts in cold weather. Connect the A long break-in period is not required for the engine parts fail.
Page 121: Engine Break-In Recommendations
STARTING AND OPERATING and not interpreted as a problem. Please check For additional vehicle break-in requirements When the parking brake is applied with the ignition your oil level with the engine oil indicator often Ú page 177. switch ON, the Brake Warning Light in the during the break in period.
Page 122: Diesel Exhaust Brake (Engine Braking)
STARTING AND OPERATING DIESEL EXHAUST BRAKE WARNING! (ENGINE BRAKING) Never leave children alone in a vehicle, or with  access to an unlocked vehicle. Leaving unat- The purpose of the exhaust brake (engine braking) tended children in a vehicle is dangerous for a feature is to supply negative (braking) torque from number of reasons.
Page 123: Automatic Transmission
STARTING AND OPERATING Indicator” in the instrument cluster display will CAUTION! WARNING! change from Yellow to Green when Automatic “Smart” Exhaust Brake is enabled. Pushing the Use of aftermarket exhaust brakes is not recom- Unintended movement of a vehicle could ...
Page 124: Ignition Park Interlock
STARTING AND OPERATING (engine running or not) and the brake pedal must GNITION NTERLOCK WARNING! be pressed. This vehicle is equipped with an Ignition Park Never leave children alone in a vehicle, or with  The BTSI will timeout if brake pedal is pressed for Interlock which requires the transmission to be in access to an unlocked vehicle.
Page 125 STARTING AND OPERATING The electronically controlled transmission adapts When parking on a hill, apply the parking brake its shift schedule based on driver inputs, along before shifting the transmission to PARK. As an with environmental and road conditions. The added precaution, turn the front wheels toward the transmission electronics are self-calibrating;...
Page 126 STARTING AND OPERATING The following indicators should be used to ensure WARNING! WARNING! that you have properly engaged the transmission into the PARK position: The transmission may not engage PARK if the When exiting the vehicle, always make sure  ...
Page 127 STARTING AND OPERATING operation will resume once the transmission 1. Stop the vehicle. CAUTION! temperature has risen to a suitable level. 2. Shift the transmission into PARK, if possible. If Towing the vehicle, coasting, or driving for any Transmission Limp Home Mode not, shift the transmission to NEUTRAL.
Page 128: 6-Speed Automatic Transmission - If Equipped
STARTING AND OPERATING You can switch between DRIVE and ERS mode at The “TOW/HAUL Indicator Light” will illuminate in WARNING! any vehicle speed. When the transmission gear the instrument cluster to indicate that TOW/HAUL selector is in DRIVE, the transmission will operate mode has been activated.
Page 129 STARTING AND OPERATING the brake pedal to move the gear selector out of Gear Ranges When exiting the vehicle, always: PARK Ú page 122. Pull the gear selector toward Apply the parking brake. Do not press the accelerator pedal when shifting ...
Page 130 STARTING AND OPERATING NEUTRAL (N) WARNING! CAUTION! Use this range when the vehicle is standing for Before moving the transmission gear selector Unintended movement of a vehicle could injure   prolonged periods with the engine running. The those in or near the vehicle. As with all vehicles, out of PARK, you must turn the ignition to the engine may be started in this range.
Page 131 STARTING AND OPERATING When frequent transmission shifting occurs (such grade), or shifting to NEUTRAL (when stopped in speeds, it will initially engage FIFTH gear, until the as when operating the vehicle under heavy loading heavy traffic) can help to reduce this excess heat vehicle slows to a speed where THIRD gear can be conditions, in hilly terrain, traveling into strong generation.
Page 132 STARTING AND OPERATING Electronic Range Select (ERS) Operation NOTE: To select the proper gear position for maximum The ERS shift control allows the driver to limit the deceleration (engine braking), simply push and highest available gear when the transmission is in hold the ERS “-”...
Page 133: Auxiliary Switches - If Equipped
STARTING AND OPERATING When To Use TOW/HAUL Mode operation is always the default at engine start-up. engaged, it may seem as if the transmission is If TOW/HAUL mode is desired, the switch must be not shifting properly when cold; this is normal. When driving in hilly areas, towing a trailer, carrying pushed each time the engine is started.
Page 134: Four-Wheel Drive Operation
STARTING AND OPERATING momentary, power source of either battery or 4WD HIGH ignition, and ability to hold last state across key Four-Wheel Drive High Range — This range cycles. provides torque to the front driveshaft (engages NOTE: four-wheel drive) which allows front and rear wheels to spin at the same speed.
Page 135 STARTING AND OPERATING When additional traction is required, the transfer If All Of The Following Shift Conditions Are Met: WARNING! case 4WD HIGH and 4WD LOW positions can be 1. The current position indicator light will turn used to maximize torque to the front driveshaft, You or others could be injured or killed if you ...
Page 136 STARTING AND OPERATING transfer case will not shift. The position indi- wheels are spinning (no traction). In this situation, WARNING! cator light for the previous position will remain the selected position indicator light will flash and on and the newly selected position indicator the original position indicator light will remain on.
Page 137: Electronically Shifted Transfer Case
STARTING AND OPERATING 3. Push the desired position on the transfer case the front and rear wheels to rotate at the same control switch. speed. This range provides additional traction for loose, slippery road surfaces only. 4. After the desired position indicator light is on (not flashing), shift the transmission back into 4WD LOW gear.
Page 138 STARTING AND OPERATING This electronically shifted transfer case is designed different transfer case position, the indicator lights illuminates during driving, it means that the to be driven in the two-wheel drive position (2WD) will do the following: four-wheel drive system is not functioning properly for normal street and highway conditions on dry, and that service is required.
Page 139 STARTING AND OPERATING Shifting Procedure control switch. If the vehicle is stopped, the ignition 4. After the desired position indicator light is on (not flashing), shift the transmission back into switch must be in the ON/RUN position with the NOTE: engine either running or off.
Page 140: Manually Shifted Transfer Case - If Equipped
STARTING AND OPERATING — either the 4H or 4L position. There is no light for the ANUALLY HIFTED RANSFER 2H or N (Neutral) positions on some models. Four-Wheel Drive Low Range — This range locks QUIPPED the front and rear driveshafts together forcing the When operating your vehicle in 4L, the engine The transfer case provides four positions: front and rear wheels to rotate at the same speed.
Page 141: Limited-Slip Differential
STARTING AND OPERATING 2H OR 4H TO 4L Transfer Case Position Indicator Light WARNING! NOTE: The Transfer Case Position Indicator Light in the You or others could be injured or killed if you instrument cluster is used to alert the driver that When shifting into or out of 4L some gear noise leave the vehicle unattended with the transfer the front axle is fully engaged and all four wheels...
Page 142: Power Take Off (Pto) Operation
STARTING AND OPERATING information is available at the Ram Truck Body WARNING! CAUTION! Builder’s web site: https://www.ramtrucks.com/ ram-commercial/body-builders-guide.html On vehicles equipped with a limited-slip Prolonged operation of the steering system at differential never run the engine with one rear the end of the steering wheel travel will increase HYDRAULIC POWER STEERING wheel off the ground since the vehicle may drive the steering fluid temperature and it should be...
Page 143: Cruise Control Systems - If Equipped
STARTING AND OPERATING is enabled, Adaptive Cruise Control will be cluster display will illuminate. To turn the system CAUTION! unavailable, and vice versa. off, push the on/off button a second time. The cruise indicator light will turn off. The system Do not use chemical flushes in your power RUISE ONTROL...
Page 144 STARTING AND OPERATING To Vary The Speed Setting To Accelerate For Passing To Resume Speed To Increase Or Decrease The Set Speed While the Cruise Controls is set, press the To resume a previously set speed, push the RES (+) accelerator as you would normally.
Page 145: Adaptive Cruise Control (Acc)
STARTING AND OPERATING (ACC) DAPTIVE RUISE ONTROL WARNING! WARNING! Adaptive Cruise Control (ACC) increases the driving Adaptive Cruise Control (ACC) is a conve- Will bring the vehicle to a complete stop   convenience provided by Cruise Control while nience system. It is not a substitute for active while following a target vehicle and hold traveling on highways and major roadways.
Page 146 STARTING AND OPERATING Adaptive Cruise Control (ACC) Operation Activating Adaptive Cruise Control (ACC) Push the ACC on/off button until one of the following appears in the instrument cluster display: The buttons on the right side of the steering wheel The minimum set speed for the ACC system is Adaptive Cruise Control Off operate the ACC system.
Page 147 STARTING AND OPERATING To Activate/Deactivate Pushing the Fixed Speed Cruise Control on/off NOTE: button will result in turning on (changing to) Fixed Keeping your foot on the accelerator pedal can Push and release the Adaptive Cruise Control  Speed Cruise Control mode. cause the vehicle to continue to accelerate (ACC) on/off button.
Page 148 STARTING AND OPERATING To Vary The Speed Setting A Trailer Sway Control (TSC) event occurs. Resume can be used at any speed above 20 mph  (32 km/h) when only Fixed Speed Cruise Control is The driver switches ESC to Full Off mode. To Increase Or Decrease The Set Speed ...
Page 149 STARTING AND OPERATING When ACC Is Active The vehicle will then maintain the set distance until: When you use the SET (-) button to decelerate, if  the engine’s braking power does not slow the The vehicle ahead accelerates to a speed above ...
Page 150 STARTING AND OPERATING Trailer Detect — If Equipped will cancel and the brakes will release. A cancel This message can sometimes be displayed while message will display on the instrument cluster driving in highly reflective areas (i.e. ice and snow, When a trailer is detected, the ACC system display and produce a warning chime.
Page 151 STARTING AND OPERATING When the condition that deactivated the system is This message can sometimes be displayed while unavailable. If this occurs, try activating ACC again no longer present, the system will return to the driving in adverse weather conditions. The ACC/ later, following an ignition cycle.
Page 152 STARTING AND OPERATING OFFSET DRIVING NOTE: LANE CHANGING On tight turns ACC performance may be limited. ACC may not detect a vehicle in the same lane that ACC may not detect a vehicle until it is completely The driver must maintain control of the vehicle, is offset from your direct line of travel, or a vehicle in the lane in which you are traveling.
Page 153: Parksense Front/Rear Park Assist
STARTING AND OPERATING PARKSENSE FRONT/REAR PARK ASSIST — NARROW VEHICLES STATIONARY OBJECTS AND VEHICLES Some narrow vehicles traveling near the outer ACC does not react to stationary objects or IF EQUIPPED edges of the lane or edging into the lane are not vehicles.
Page 154: Parksense Sensors
STARTING AND OPERATING NOTE: ENSE ENSORS ENSE ARNING ISPLAY If equipped as a dually, the ParkSense system has For the 3500, 4500 and 5500 Chassis Cab The ParkSense Warning screen is located within six rear sensors to assist in detection around the vehicles, the rear ParkSense sensors are shipped the instrument cluster display Ú...
Page 155 STARTING AND OPERATING Front/Rear ParkSense Arcs 1 — No Tone/Solid Arc 6 — Fast Tone/Flashing Arc 2 — No Tone/Flashing Arc 7 — Fast Tone/Flashing Arc 3 — Fast Tone/Flashing Arc 8 — Slow Tone/Solid Arc 4 — Continuous Tone/Flashing Arc 9 —...
Page 156 STARTING AND OPERATING If an obstacle is detected in the left and/or right rear region, the display will show a single arc in the left and/or right rear region and the system will produce a tone. As the vehicle moves closer to the obstacle, the display will show the single arc moving closer to the vehicle and the tone will change from a single 1/2 second tone to slow, to fast, to continuous.
Page 157: Enabling And Disabling Parksense
STARTING AND OPERATING Front Park Assist Audible Alerts switch is pushed, and the system requires service, LEANING ENSE YSTEM the Front or Rear ParkSense switch LED will blink ParkSense will turn off the Front Park Assist Clean the ParkSense sensors with water, car wash momentarily, and then the LED will be on.
Page 158: Lanesense - If Equipped
STARTING AND OPERATING LANESENSE — IF EQUIPPED ParkSense system might not detect an obstacle WARNING! behind or in front of the fascia/bumper, or it could provide a false indication that an obstacle Before using ParkSense, it is strongly recom- ENSE PERATION ...
Page 159: Turning Lanesense On Or Off
STARTING AND OPERATING NOTE: When the LaneSense system senses the lane ENSE ARNING ESSAGE  When operating conditions have been met, the has been approached and is in a lane departure The LaneSense system will indicate the current situation, the visual warning in the instrument LaneSense system will monitor if the driver’s lane drift condition through the instrument cluster cluster display will show the left lane line...
Page 160: Changing Lanesense Status
STARTING AND OPERATING Left Lane Departure — Both Lane Lines Detected For example: If approaching the left side of the For example: If approaching the left side of the lane the steering wheel will turn to the right. lane the steering wheel will turn to the right. When the LaneSense system is on, and both the ...
Page 161: Parkview Rear Back Up Camera
STARTING AND OPERATING Use of the turn signal suppresses the warnings. When the vehicle is shifted out of REVERSE (with Cargo Camera Icons — If Equipped  camera delay turned off), the rear camera mode is The system will not apply torque to the steering ...
Page 162 STARTING AND OPERATING distance to the rear of the vehicle. These settings When Zoom View is selected while the vehicle is in CAUTION! can be adjusted within Uconnect Settings REVERSE, then shifted to DRIVE, the camera delay Ú page 191. view will display the standard Backup Camera To avoid vehicle damage, ParkView should ...
Page 163: Surround View Camera System
STARTING AND OPERATING SURROUND VIEW CAMERA SYSTEM — When the vehicle is shifted into REVERSE, the Rear Modes Of Operation View and Top View is the default view of the Standard Rear View can be manually activated by IF EQUIPPED system.
Page 164 STARTING AND OPERATING NOTE: Rear View. The Top View will be disabled when this is selected. If the Cargo Camera view was selected through the Surround View screen, exiting out of the Cargo Top View Plus Front View Camera screen will return to the Surround View The Front View will show you what is screen.
Page 165 STARTING AND OPERATING display screen, the image will zoom in to four times image will continue to be displayed for up to 10 NOTE: the standard view. Pressing the icon a second time seconds unless the vehicle speed exceeds If snow, ice, mud, or any foreign substance ...
Page 166 STARTING AND OPERATING NOTE: Deactivation Deactivation If the vehicle is in DRIVE, NEUTRAL, or REVERSE, The Forward Facing Camera is deactivated in the When the vehicle is shifted out of REVERSE (with  and speed is greater than or equal to 8 mph following conditions: camera delay turned on), the camera image will (13 km/h), Zoom View is unavailable and the...
Page 167: Trailer Cameras - If Equipped
STARTING AND OPERATING To access all camera options when the vehicle is in Set Up CAUTION! REVERSE, select the "More Cams" button on the The Trailer Surround View Camera system includes surround view screen. To avoid vehicle damage, Surround View ...
Page 168 STARTING AND OPERATING Inputting Trailer Values Trailer Surround Camera soft button to access Top View and Rear View of the trailer. For the Trailer Surround View Camera system to function, all fields must be entered. When a value If the camera delay is turned on, the camera image is needed the screen will display “Required”.
Page 169 STARTING AND OPERATING Right View Deactivation NOTE: If the Trailer Surround Camera is activated Pressing the Right View soft button will The system is deactivated in the following manually, and the vehicle is shifted into REVERSE, conditions if it was activated automatically: give the driver a wider angle view of the deactivation methods for automatic activation are right side trailer camera and is paired...
Page 170: Aux Camera - If Equipped
STARTING AND OPERATING rearview display. On vehicles with Surround View out by pressing the “X” in the upper right hand CAUTION! Camera (if equipped), the AUX Camera can be corner. This will return the display back to the activated when the vehicle is in REVERSE by first previously displayed screen.
Page 171: Refueling The Vehicle- Gasoline
STARTING AND OPERATING damaged, a loose gASCAP indicator will display in WARNING! WARNING! the instrument cluster telltale display area Ú page 81. Tighten the fuel filler cap properly and Never have any smoking materials lit in or The inlet for the engine air intake is located ...
Page 172: Diesel Exhaust Fluid
STARTING AND OPERATING NOTE: Electronically-heated DEF lines IESEL XHAUST LUID  When working with DEF, it is important to know DEF control module  Your vehicle is equipped with a Selective Catalytic that: NOx sensors Reduction (SCR) system to meet the very stringent ...
Page 173 STARTING AND OPERATING DEF FILL PROCEDURE The DEF gauge may also not immediately Refilling With Containers  update after a refill if the temperature of the Proceed as follows: NOTE: DEF fluid is below 39°F (4°C). The DEF tank For the correct fluid type Ú page 404. Check the expiration date.
Page 174: Vehicle Loading
STARTING AND OPERATING Extra care should be taken when filling with Each axle GAWR is determined by the components CAUTION! portable containers to avoid overfilling. Note the in the system with the lowest load carrying capacity level of the DEF gauge in your instrument cluster. (axle, springs, tires or wheels).
Page 175: Loading
STARTING AND OPERATING Gross Vehicle Weight Rating (GVWR) OADING CAUTION! The GVWR is the total allowable weight of your The actual total weight and the weight of the front Do not load your vehicle any heavier than the vehicle. This includes driver, passengers, cargo and rear of your vehicle at the ground can best be GVWR or the maximum front and rear GAWR.
Page 176 STARTING AND OPERATING Gross Combination Weight Rating (GCWR) friction associated with the telescoping motion to Weights (TW) and may be required depending on dampen any unwanted trailer swaying motions vehicle and trailer configuration/loading to comply The GCWR is the total allowable weight of your while traveling.
Page 177 STARTING AND OPERATING RECOMMENDED DISTRIBUTION HITCH the front fender is approximately (H2-H1)/ 2+H1 (about 1/2 the difference between ADJUSTMENT H2 and H1 above normal ride height [H1]). 1. Position the truck to be ready to connect to 6. Perform a visual inspection of the trailer and the trailer (do not connect the trailer).
Page 178: Trailer Hitch Type And Maximum Trailer Weight
STARTING AND OPERATING Gooseneck Hitch The gooseneck hitch employs a pivoted coupling arm which attaches to a ball mounted in the bed of a pickup truck. The coupling arm connects to the hitch mounted over the rear axle in the truck bed. RAILER ITCH YPE AND...
Page 179: Trailer And Tongue Weight
STARTING AND OPERATING Consider the following items when computing the RAILER ONGUE EIGHT CAUTION! weight on the rear axle of the vehicle: Never exceed the maximum tongue weight Then, during the first 500 miles (805 km) that  The tongue weight of the trailer. ...
Page 180 STARTING AND OPERATING Towing Requirements — Tires brake system, an electronic brake controller is WARNING! not required. Do not attempt to tow a trailer while using a  Safety chains must always be used between  Trailer brakes are recommended for trailers compact spare tire.
Page 181 STARTING AND OPERATING Integrated Trailer Brake Module (ITBM) — The user interface consists of the following: GAIN If Equipped Manual Brake Control Lever The GAIN setting is used to set the trailer brake control for the specific towing condition and should Your vehicle may have an ITBM for Electric and Slide the manual brake control lever to the left to be changed as towing conditions change.
Page 182 STARTING AND OPERATING 5. Push the RIGHT arrow on the steering wheel to 8. In a traffic-free environment, tow the trailer on Repeat steps 8 and 9 until the GAIN setting is at a enter “TRAILER TOW”. a dry, level surface at a speed of 20–25 mph point just below trailer wheel lockup.
Page 183 STARTING AND OPERATING NOTE: CAUTION! Do not cut or splice wiring into the vehicle’s wiring Connecting a trailer that is not compatible with harness. the ITBM system may result in reduced or The electrical connections are all complete to the complete loss of trailer braking.
Page 184: Towing Tips
STARTING AND OPERATING When activated the feature will enable all of the The sequence will only activate if the following OWING exterior lights sequentially for up to five minutes conditions are met: Before setting out on a trip, practice turning, allowing time to walk around and verify Vehicle is equipped with the Trailer Tow ...
Page 185: Snowplow - If Equipped
STARTING AND OPERATING SNOWPLOW — IF EQUIPPED If you regularly tow a trailer for more than EFORE LOWING 45 minutes of continuous operation, then change Check the hydraulic system for leaks and proper Snowplow Prep Packages are available as a factory ...
Page 186: Over The Road Operation With Snowplow Attached
STARTING AND OPERATING The loaded vehicle weight, including the snowplow PERATION ENERAL AINTENANCE system, all aftermarket accessories, driver, NOWPLOW TTACHED Snowplows should be maintained in accordance passengers, options, and cargo, must not exceed with the plow manufacturer's instructions. either the Gross Vehicle Weight Rating (GVWR) or The blade restricts air flow to the radiator and Gross Axle Weight Rating (GAWR).
Page 187: Recreational Towing (Behind Motorhome)
STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheels OFF The Ground Two-Wheel Drive Models Four-Wheel Drive Models See Instructions Automatic transmission in PARK  Flat Tow NONE NOT ALLOWED Transfer case in N (Neutral) ...
Page 188: Models
STARTING AND OPERATING — Shifting Into N (Neutral) ECREATIONAL OWING CAUTION! Use the following procedure to prepare your HEEL RIVE ODELS Before recreational towing, the transfer case  vehicle for recreational towing. NOTE: must be in N (Neutral). To be certain the transfer case is fully in N (Neutral), perform Both the manual shift and electronically shifted WARNING!
Page 189 STARTING AND OPERATING 4. Shift the transfer case into N (Neutral): 10. Shift the transmission into PARK. Shifting Out Of N (Neutral) With manual shift transfer case, shift the 11. Place the ignition in the OFF mode, and Use the following procedure to prepare your ...
Page 190: Driving Tips
STARTING AND OPERATING DRIVING TIPS NOTE: NOTE: When shifting the transfer case out of N (Neutral), With electronically shifted transfer case: turning the engine off is not required, but may be Steps 3 and 4 are requirements that must be RIVING LIPPERY URFACES...
Page 191: Driving Through Water
STARTING AND OPERATING RIVING HROUGH ATER WARNING! CAUTION! Driving through water more than a few inches/ Driving through standing water limits your Driving through standing water may cause   centimeters deep will require extra caution to vehicle’s braking capabilities, which increases damage to your vehicle’s drivetrain compo- ensure safety and prevent damage to your vehicle.
Page 192: Multimedia
MULTIMEDIA UCONNECT SYSTEMS appropriate steps as needed. Similar to a WARNING! computer or other devices, your vehicle may For detailed information about your Uconnect 3 With require software updates to improve the usability As always, if you experience unusual vehicle ...
Page 193: Uconnect Settings
MULTIMEDIA UCONNECT SETTINGS For the Uconnect 3 With 5-inch Display, the USTOMER ROGRAMMABLE EATURES Uconnect 5/5 NAV With 8.4-inch Display, and The Uconnect system uses a combination of Uconnect 5 NAV With 12-inch Display buttons on the touchscreen and buttons on the For Uconnect 3, push the SETTINGS button on the faceplate located on the center of the instrument top on faceplate.
Page 194 MULTIMEDIA My Profile When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument Language Cluster Display.
Page 195 MULTIMEDIA Setting Name Description This setting will allow you to set the time format (AM/PM). Sync Time With GPS must be “Off” for this setting to be available. The “12 hrs” setting will set the Time Format time to a 12-hour format. The “24 hrs” setting will set the time to a 24-hour format.
Page 196 MULTIMEDIA Setting Name Description This setting will allow you to favorite app drawer pop-ups with “On” and “Off” App Drawer Favoriting Pop-ups options. This setting will allow you to unfavorite app drawer pop-ups with “On” and App Drawer Unfavoritings Pop-ups “Off”...
Page 197 MULTIMEDIA Display When the Display button is pressed on the touchscreen, the system will display the options related to the theme (if equipped), brightness, and color of the touchscreen. The available settings are: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will change the language of the Uconnect system and Instrument...
Page 198 MULTIMEDIA Setting Name Description Touchscreen Beep This setting will allow you to turn the touchscreen beep on or off. This setting allows you to set the Control Screen to turn off automatically after Control Screen Timeout five seconds or stay open until manually closed. Navigation Next Turn Pop-ups Displayed in Cluster This setting will display navigation prompts in the Instrument Cluster Display.
Page 199 MULTIMEDIA Setting Name Description This setting will turn the Forward Collision Warning system on or off. The “Off” setting will deactivate the FCW system. The “Warning Only” setting will provide Forward Collision Warning only an audible chime when a collision is detected. The “Warning + Active Braking”...
Page 200 MULTIMEDIA Setting Name Description Hill Start Assist This setting will turn the Hill Start Assist system on or off. This setting will add a timed delay to the ParkView Backup Camera when ParkView Backup Camera Delay shifting out of REVERSE. ParkView Backup Camera Active Guidelines This setting will turn the ParkView Backup Camera Active Guidelines on or off.
Page 201 MULTIMEDIA Setting Name Description This setting will allow you to set the hours. Sync Time With GPS must be off for Set Time Hours this setting to be available. The “+” setting will increase the hours. The “-” setting will decrease the hours. This setting will allow you to set the minutes.
Page 202 MULTIMEDIA Voice When the Voice button is pressed on the touchscreen, the system displays the options related to the vehicle’s Voice Recognition feature. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will allow you to change the system’s voice to either “Male” or Voice Options “Female”.
Page 203 MULTIMEDIA Trailer Brake/Trailer When the Trailer Brake/Trailer button is pressed on the touchscreen, the system will display settings related to trailer towing. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Select from “Trailer 1”, “Trailer 2”, “Trailer 3”, or “Trailer 4”. These trailer Trailer Select designations can be used to save different trailer settings.
Page 204 MULTIMEDIA Setting Name Description This setting will add a timed delay to the ParkView Backup Camera when ParkView Backup Camera Delay shifting out of REVERSE. ParkView Backup Camera Active Guidelines This setting will turn the ParkView Backup Camera Active Guidelines on or off. ParkView Backup Camera Fixed Guidelines This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.
Page 205 MULTIMEDIA Lights When the Lights button is pressed on the touchscreen, the system displays the options related to the vehicle’s exterior and interior lights. NOTE: When the “Daytime Running Lights” feature is selected, the daytime running lights can be turned on or off. This feature is only allowed by law in the country ...
Page 206 MULTIMEDIA Brakes After pressing the Brakes button on the touchscreen, the following settings will be available: NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description Auto Park Brake This setting will turn the Auto Park Brake on or off. Brake Service This setting will allow you to retract the brakes for servicing.
Page 207 MULTIMEDIA Setting Name Description This setting will sound the horn when the remote start is activated from the Sound Horn With Remote Start key fob. This setting will change how many pushes of the Unlock button on the key fob are needed to unlock all the doors.
Page 208 MULTIMEDIA Key Off Options/Engine Off Options When the Key Off Options/Engine Off Options button is pressed on the touchscreen, the system displays the options related to vehicle shutoff. These settings will only activate when the ignition is set to OFF. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 209 MULTIMEDIA Setting Name Description Transport Mode This setting will disable the air suspension system for flat towing. This setting must be activated before performing a wheel alignment. Refer to Wheel Alignment Mode an authorized dealer for further information. Audio When the Audio button is pressed on the touchscreen, the system displays options related to the vehicle’s sound system. These settings can change the audio location within the vehicle, adjust the bass or treble levels, and auto-play settings from an audio device or smartphone.
Page 210 MULTIMEDIA Notifications When the Notifications button is pressed on the touchscreen, the system displays the options related to Notifications for the system. NOTE: Depending on the vehicle’s options, feature settings may vary. Setting Name Description This setting will turn off the Notification chime that plays when a new Notification Sounds notification is sent.
Page 211 MULTIMEDIA SiriusXM® Setup When the SiriusXM® Setup button is pressed on the touchscreen, the system displays options related to SiriusXM® satellite radio. These settings can be used to skip specific radio channels and restart favorite songs from the beginning. NOTE: A subscription to SiriusXM®...
Page 212 MULTIMEDIA Reset When the Reset button is pressed on the touchscreen, the system displays the options related to resetting the Uconnect system back to its default settings. These settings can clear personal data and reset selected settings from other menus. NOTE: Depending on the vehicle’s options, feature settings may vary.
Page 213: Uconnect Introduction
MULTIMEDIA UCONNECT INTRODUCTION YSTEM VERVIEW Uconnect 3 With 5-inch Display 1 — RADIO Button 6 — COMPASS Button 2 — MEDIA Button 7 — SETTINGS Button 3 — PHONE Button 8 — MORE Button 4 — VOLUME & On/Off Button 9 —...
Page 214 MULTIMEDIA NOTE: Uconnect screen images are for illustration purposes only and may not reflect exact software for your vehicle. Feature Description Press/Push the Radio button or Media button to enter Radio Mode/Media Radio/Media Mode and access the radio functions and external audio sources Ú page 213. Press/Push the Phone button to enter Phone Mode and access the Phone hands-free phone system Ú...
Page 215: Safety And General Information
MULTIMEDIA Ensure the volume level of the system is set to a If necessary, use a lint-free cloth dampened AFETY ENERAL NFORMATION   level that still allows you to hear outside traffic with a cleaning solution, such as isopropyl Safety Guidelines and emergency vehicles.
Page 216: Radio Mode
MULTIMEDIA The right-hand control is a rocker-type switch with goes to the beginning of the current track, or the 6 — Station Info a push button in the center and controls the beginning of the previous track if it is within eight 7 —...
Page 217 MULTIMEDIA Tune/Scroll Control NOTE: RADIO VOICE COMMANDS Turn the rotary TUNE/SCROLL control knob Pressing and holding either the Seek Up Use your voice to quickly get to the AM, FM, or clockwise to increase or counterclockwise to SiriusXM® Satellite Radio stations you would like Seek Down button will scan the different decrease the radio station frequency.
Page 218 MULTIMEDIA This functionality is only available for radios NOTE: SiriusXM® Satellite Radio uses direct satellite-to-receiver broadcasting technology to equipped with a Satellite receiver. In order to You will need to provide the SiriusXM® ID (RID) provide clear, coast-to-coast radio content. receive satellite radio, the vehicle needs to be located at the bottom of the Channel 0 screen.
Page 219 MULTIMEDIA REPLAY 1 — Browse Replay provides a means to store and replay up to 2 — Radio Bands 22 minutes of music audio and 48 minutes of talk 3 — Direct Tune radio. Once the channel is switched, content in 4 —...
Page 220 MULTIMEDIA FAVORITES This Screen contains many submenus. You can Remove Favorites exit submenus to return to a parent menu by Press the Remove Favorites tab at the top of the Press the Favorites button on the touchscreen to pressing the Back arrow. screen.
Page 221 MULTIMEDIA Add/Delete — If Equipped Setting Presets For the Uconnect 3 With 5-inch Display Press the Add/Delete button on the touchscreen to A set of four presets will appear on the screen. activate the League Scroll list. Press the chosen Press the All button to view all saved presets.
Page 222 MULTIMEDIA Audio Setting Description Press the Balance/Fade button on the touchscreen to balance audio between the front speakers or fade the audio between the rear and front speakers. Balance/Fade Press the Front, Rear, Left or Right button or press and drag the red Speaker icon to adjust the Balance/Fade.
Page 223: Media Mode
MULTIMEDIA Audio Source Selection display will show the track number and index time EDIA in minutes and seconds. Play will begin at the start Once in Media Mode, press the Source or Source Operating Media Mode of track 1. Select button on the touchscreen and the desired mode button on the touchscreen.
Page 224 MULTIMEDIA In Bluetooth® Mode, press the Media button on To insert an Auxiliary device, gently insert the release the Seek Down button on the touchscreen Auxiliary device cable into the AUX port. If you to return to the beginning of the current selection, the touchscreen to select the desired audio insert an Auxiliary device with the ignition and the or return to the beginning of the previous selection...
Page 225: Phone Mode
MULTIMEDIA Info MEDIA VOICE COMMANDS HONE In USB Mode, press the Info button on the Uconnect offers connections via USB, Bluetooth®, Overview touchscreen to display the current track and auxiliary (AUX) ports. Voice operation is only Uconnect Phone is a voice-activated, hands-free, information.
Page 226 MULTIMEDIA Screen Activated Features Uconnect Phone allows you to transfer calls Phone Button between the system and your mobile phone as you Dialing via Keypad using touchscreen. The Phone button on your steering wheel  enter or exit your vehicle and enables you to mute is used to get into the Phone Mode and Viewing and Calling contacts from Phonebooks ...
Page 227 MULTIMEDIA You will be prompted for a specific command and system filters out certain non-word utterances and CANCEL COMMAND then guided through the available options. sounds such as “ah” and “eh.” The system handles At any prompt, after the beep, you can say “Cancel” fill-in words such as “I would like to”.
Page 228 MULTIMEDIA phone is currently connected with the 6. Uconnect Phone will display an in-progress system, this pop-up will not appear. screen while the system is connecting. 3. Select “Yes” to begin the pairing process. 7. When your mobile phone finds the Uconnect system, select “Uconnect.”...
Page 229 MULTIMEDIA NOTE: 3. Press to select the particular phone or the 5. Press the Disconnect Device or the Delete During the pairing procedure, you may receive a particular audio device. A pop-up menu will Device button on the touchscreen. appear; press “Connect Phone”. pop-up on your mobile phone for the Uconnect 6.
Page 230 MULTIMEDIA MANAGING YOUR FAVORITES — IF EQUIPPED Phone Call Features messages and contacts. Selecting “Ok” or “Allow” will sync your contacts with the Uconnect system. There are two ways you can add an entry to your The following features can be accessed through See the Uconnect website, UconnectPhone.com, favorites: the Uconnect Phone if the feature(s) are available...
Page 231 MULTIMEDIA CALL CONTROLS KEY PAD NUMBER ENTRY ANSWER OR IGNORE AN INCOMING CALL — NO CALL CURRENTLY IN PROGRESS The touchscreen allows you to control the following 1. Press the Phone button. call features: When you receive a call on your mobile phone, the 2.
Page 232 MULTIMEDIA ANSWER OR IGNORE AN INCOMING CALL — TOGGLING BETWEEN CALLS Automatic reply messages can be: CALL CURRENTLY IN PROGRESS “I am driving right now, I will get back to you  shortly”. If a call is currently in progress and you have another incoming call, you will hear the same Create a custom auto reply message up to ...
Page 233 MULTIMEDIA CALL TERMINATION Advanced Phone Connectivity WARNING! To end a call in progress, momentarily press the TRANSFER CALL TO AND FROM MOBILE ALWAYS drive safely with your hands on the End Call button on the touchscreen or the Phone PHONE wheel.
Page 234 MULTIMEDIA Smooth Road Surface Voice Text Reply — If Equipped  PRE-DEFINED VOICE TEXT REPLY Fully Closed Windows Uconnect can announce incoming text messages.  RESPONSES Push the VR button or Phone button Dry Weather Conditions  I’ll call you I need See you in 5 say:...
Page 235: Connected Vehicle Services - If Equipped
MULTIMEDIA CONNECTED VEHICLE SERVICES — Siri® Eyes Free — If Equipped WARNING! When used with your Apple® iPhone® connected IF EQUIPPED ALWAYS obey traffic laws and pay attention to to your vehicle via Bluetooth®, Siri lets you use the road. ALWAYS drive safely with your hands on your voice to send text messages, select media, EHICLE ONNECTED...
Page 236 MULTIMEDIA What Is SiriusXM Guardian™? Activation — If Equipped congestion, civil disturbances, actions of third parties or the government, Internet failure, and/ SiriusXM Guardian™ uses an embedded device in To unlock the full potential of SiriusXM Guardian™ or the physical location of your vehicle, such as the Uconnect system installed in your vehicle, in your vehicle, you must activate your SiriusXM in an underground parking structure or under a...
Page 237: Getting Started With Connected Vehicle Services
MULTIMEDIA Features And Packages For customers in the United States, visit you will be able to log into the Mobile App  www.mopar.com, and click the Sign In/Register and the Owner’s Site. After the trial period, you must purchase a button in the upper right-hand corner to register subscription to continue your services by calling a Once on the Remote screen and you have set up...
Page 238: Using Siriusxm Guardian
MULTIMEDIA For customers in the United States, press the Sign text message, push notification, and/or E-mail to Access To Emergency Services At The Push Of A In/Register button and enter your email address notify you of the event. To set up the notifications, Button and password.
Page 239 MULTIMEDIA NOTE: 2. Once a connection between the vehicle and a An in-vehicle audio message will state “Vehicle  Certain SiriusXM Guardian™ connected services SiriusXM Guardian™ Customer Care agent is phone requires service. Please contact your made, the agent will stay on the line with you. dealer.”...
Page 240 MULTIMEDIA Requirements WARNING! WARNING! This feature is available only on vehicles sold in  Do not add any aftermarket electrical equip- Ignoring the Rearview Mirror Light could mean the US or Canada.   ment to the vehicle’s electrical system. This you will not have SOS Call services if needed.
Page 241 MULTIMEDIA After a crash where the airbags deploy: limit the ability to reach the response center or Remote Commands lets you send a request to your reach emergency support. vehicle in one of three ways: 1. Automatic SOS will initiate a call with an agent.
Page 242 MULTIMEDIA Using A Remote Command Through Your Owner’s Contacting SiriusXM Guardian™ Customer Care Your mobile device must have a cellular or Wi-Fi  Site (for example, in case of an accidental lock-out): connection. 1. Log on to your Owner’s Site using the 1.
Page 243 MULTIMEDIA Remote Vehicle Start The vehicle must have at least a quarter tank of Working Vehicle Conditions  fuel, along with oil and battery power. The vehicle must in PARK or at a standstill. Description  The vehicle’s hazard lights must be off. ...
Page 244 MULTIMEDIA vate your services, renew after your trial has Vehicle must be registered with SiriusXM How It Works  expired, for in-vehicle support for your SiriusXM Guardian™ and have an active subscription that 1. There are multiple ways to find a destination. Guardian™...
Page 245 MULTIMEDIA Vehicle Finder 4G Wi-Fi Hotspot — If Equipped Create A 4G Wi-Fi Hotspot For Use In Your Vehicle How It Works Description Description The 4G Wi-Fi Hotspot feature provides The Vehicle Finder feature allows you to find the 4G Wi-Fi Hotspot is an in-vehicle service that the vehicle passengers with an internet location of your vehicle.
Page 246 MULTIMEDIA Requirements Once the 4G Wi-Fi Hotspot is purchased, you can How It Works change its name and the password by selecting the 1. If your vehicle is stolen, contact local law Vehicle must be properly equipped with the  Wi-Fi Hotspot App and pressing the Setup Wi-Fi enforcement as soon as possible.
Page 247 MULTIMEDIA health and performance, your vehicle’s location, In-Vehicle Notifications — If Equipped Here are a few of the many questions you can ask your utilization of the features in your vehicle, and Alexa: Description other data. “Alexa, ask <vehicle brand> to start my <vehicle ...
Page 248 MULTIMEDIA Family Drive Alerts — If Equipped Guardian™ connected services. There will be To link your Uconnect account with Google additional settings to confirm on the following Assistant, follow these steps: Description screen. 1. Download and install the Google Assistant Family Drive Alerts help promote safer driving and 7.
Page 249: Manage My Siriusxm Guardian™ Account
MULTIMEDIA SmartWatch Integration — If Equipped Market — If Equipped 9. The system will verify the phone number. Once verified, Market will be available to use. Press Description With Market, you can enjoy seamless and secure the OK button. transactions from the comfort of your vehicle. SmartWatch Integration puts the Mobile App right Make restaurant reservations, place food orders, on your Apple®...
Page 250: Connected Services Sos Faqs - If Equipped
MULTIMEDIA do not have an active subscription, push the 2. Which is faster, my key fob or the Mobile App? ONNECTED ERVICES OADSIDE ASSIST button and press the Activate button on the Your key fob will lock/unlock the door more SSISTANCE touchscreen to activate services.
Page 251: Connected Services Vehicle Finder Faqs
MULTIMEDIA 3. Can I select a different route than the most connected services subscription to find out if ONNECTED ERVICES TOLEN EHICLE the insurance provider can offer you a lower recent one I sent to my vehicle? Yes, once you —...
Page 252: Connected Services Remote Horn & Lights Faqs
MULTIMEDIA Guardian™ Security PIN help to ensure that 2. Which is faster, my key fob or the Mobile App? Press the Activate Services icon in the Apps  nobody can start your vehicle if they happen to Your key fob will sound the horn and flash the menu.
Page 253 MULTIMEDIA Security PIN, you can reset the PIN by selecting 9. What happens when my subscription comes You also can visit your Owner’s Site and up for renewal? If you have added a credit card choose a subscription to view its expiration Edit Profile on your Owner’s Site.
Page 254: Data Collection & Privacy
MULTIMEDIA 17. What if I forgot to remove my account FCA US LLC for the purposes stated in the EGULATORY AFETY information before I returned my lease vehicle Uconnect Privacy Policy. Vehicle health and NFORMATION or sold it? Contact SiriusXM Guardian™ diagnostic information including location data may Customer Care.
Page 255: Off-Road Pages - If Equipped
MULTIMEDIA OFF-ROAD PAGES — IF EQUIPPED To access Off-Road Pages, press the Vehicle button on the touchscreen, select the Off-Road Your vehicle may be equipped with Off-Road Pages Pages tab, and then select the Off Road button on which display vehicle information related to the the main screen.
Page 256: Off-Road Pages Status Bar
MULTIMEDIA AGES TATUS 1 — Transfer Case Status 2 — Latitude/Longitude The Off-Road Pages Status Bar is located along the 3 — Altitude bottom of Off-Road Pages and is present in each of the four selectable page options. It provides 4 —...
Page 257: Vehicle Dynamics
MULTIMEDIA EHICLE YNAMICS 1 — Steering Angle 2 — Transfer Case Status The Vehicle Dynamics page displays information 3 — Rear Axle Locker Status concerning the vehicle’s transfer case and steering angle. 4 — Rear Axle The following information is displayed: 1.
Page 258: Accessory Gauge
MULTIMEDIA CCESSORY AUGE 1 — Oil Temperature 2 — Coolant Temperature The Accessory Gauge page displays the current 3 — Oil Pressure status of the vehicle’s Coolant Temperature, Oil Temperature, Oil Pressure, Transmission 4 — Battery Voltage Temperature, and Battery Voltage. 5 —...
Page 259: Pitch & Roll
MULTIMEDIA & R NOTE: ITCH Pitch & Roll values may show upon startup. These The Pitch & Roll page displays the vehicle’s current numbers will update once the vehicle is driven. pitch (angle up and down) and roll (angle side to side) in degrees.The Pitch &...
Page 260: Suspension
MULTIMEDIA USPENSION ORWARD ACING AMERA The Suspension page displays the current status of Your vehicle may be equipped with a Forward the vehicle’s suspension system and the current Facing Camera that allows you to see an on-screen ride height of the vehicle. The Suspension page will image of the front view of your vehicle.
Page 261: Safety
SAFETY SAFETY FEATURES You also may experience the following normal WARNING! characteristics when the ABS activates: (ABS) Pumping of the Anti-Lock Brakes will diminish RAKE YSTEM  ABS motor noise or clicking sounds (you may  their effectiveness and may lead to a collision. continue to hear for a short time after the stop) The ABS provides increased vehicle stability and Pumping makes the stopping distance longer.
Page 262: Electronic Brake Control (Ebc) System
SAFETY Anti-Lock Brake System (ABS) Warning Brake System Warning Light Your vehicle may also be equipped with Trailer Sway Control (TSC) and Hill Descent Control (HDC). Light The red Brake System Warning Light will turn on Brake Assist System (BAS) when the ignition is placed in the ON/RUN mode The yellow ABS Warning Light will turn on when the and may stay on for as long as four seconds.
Page 263 SAFETY prevent wheel lift due to other factors, such as wheel(s) to counteract the above conditions. WARNING! road conditions, leaving the roadway, or striking Engine power may also be reduced to help the objects or other vehicles. vehicle maintain the desired path. Electronic Stability Control (ESC) cannot ...
Page 264 SAFETY ESC Operating Modes NOTE: WARNING! The system may switch from ESC “Full Off” to Depending upon model and mode of operation, the “Partial Off” mode when the vehicle exceeds a When in “Partial Off” mode, the TCS function-  ESC system may have multiple operating modes.
Page 265 SAFETY ESC Activation/Malfunction Indicator Light NOTE: Enabling HDC And ESC OFF Indicator Light The ESC Activation/Malfunction Indicator Light HDC is enabled by pushing the HDC switch, but the  and the ESC OFF Indicator Light come on following conditions must also be met to enable The ESC Activation/Malfunction Indicator momentarily each time the ignition is placed in HDC:...
Page 266 SAFETY 6th = 3.7 mph (6 km/h) Disabling HDC The cluster icon and switch lamp will flash when   HDC deactivates due to overheated brakes. The 7th = 4.3 mph (7 km/h) HDC will be deactivated and disabled if any of the ...
Page 267 SAFETY The gear selection must match vehicle uphill Disabling And Enabling HSA Ready Alert Braking (RAB)  direction (i.e., vehicle facing uphill is in forward This feature can be turned on or turned off. To RAB may reduce the time required to reach full gear;...
Page 268: Auxiliary Driving Systems
SAFETY AUXILIARY DRIVING SYSTEMS Trailer Sway Control (TSC) If an FCW with Mitigation event begins at a speed below 32 mph (52 km/h), the system may provide TSC uses sensors in the vehicle to recognize an the maximum braking possible to mitigate the (FCW) ORWARD OLLISION...
Page 269 SAFETY NOTE: Turning FCW On Or Off FCW Braking Status And Sensitivity The minimum speed for FCW activation is  The FCW button is located in the Uconnect display The FCW sensitivity and Active Braking status are 3 mph (5 km/h). in the control settings Ú...
Page 270: Tire Pressure Monitoring System (Tpms)
SAFETY inflation pressure molded into the tire sidewall. This setting provides less reaction time than  RESSURE ONITORING YSTEM the “Far” and “Medium” settings, which The tire pressure will also increase as the vehicle (TPMS) allows for a more dynamic driving experi- is driven —...
Page 271 SAFETY For example, your vehicle may have a The TPMS is not a substitute for proper tire  CAUTION! recommended cold (parked for more than three maintenance, and it is the driver’s responsibility hours) placard pressure of 30 psi (207 kPa). If the to maintain correct tire pressure using an accu- Using aftermarket tire sealants may cause the ...
Page 272 SAFETY NOTE: NOTE: It is particularly important for you to check the tire When filling warm tires, the tire pressure may need pressure in all of the tires on your vehicle monthly to be increased up to an additional 4 psi (28 kPa) and to maintain the proper pressure.
Page 273 SAFETY Accumulation of snow or ice around the wheels If you install the non-matching full size spare or Once you repair or replace the original road tire    or wheel housings. compact spare tire in place of a road tire that and reinstall it on the vehicle in place of the has a pressure below the low-pressure warning non-matching full size spare or compact spare,...
Page 274 SAFETY NOTE: each of the trailer tires in the correct trailer Follow the on screen prompts to select the number position, based on trailer configuration. The TTPMS of axles (1 - 3), the number of trailer tires (2, 4, 6, The vehicle may not be driven until the pairing can support up to 12 trailer tires per configured 8, or 12), and the set trailer tire pressure.
Page 275 SAFETY Trailer Tire Pressure Monitoring System Low (24 km/h) in order for the TTPMS to receive the NOTE: trailer tire pressure information. Pressure Warnings The vehicle may not be driven until the pairing process is complete. Trailer Tire Pressure System Not Configured When a low tire pressure in one or more of the Tire Fill Alert —...
Page 276 SAFETY NOTE: SELECTABLE TIRE FILL ALERT (STFA) — Once the customer selects the tire pressures for the front and rear axles that they want to inflate or It is not required to have the engine running to IF EQUIPPED deflate to, they can begin inflating or deflating one enter Tire Fill Alert mode.
Page 277: Occupant Restraint Systems
SAFETY Operation: The TPIS consists of the following components: Installing aftermarket window tinting that  contains materials that may block radio wave The horn will chirp once when the selected pres- Receiver module   signals. sure is reached to let the user know when to Four TPMS sensors (Single Rear Wheel (SRW) ...
Page 278: Important Safety Precautions
SAFETY 7. The driver and front passenger seats should a poor driver and could cause a collision that MPORTANT AFETY RECAUTIONS be moved back as far as practical to allow the includes you. This can happen far away from home Please pay close attention to the information in front air bags room to inflate.
Page 279 SAFETY Light will turn on and remain on until both outboard unoccupied. BeltAlert may be triggered when an WARNING! animal or other items are placed on the outboard front seat belts are buckled. The outboard front passenger seat BeltAlert is not active when an front passenger seat or when the seat is folded flat Relying on the air bags alone could lead to ...
Page 280 SAFETY WARNING! WARNING! WARNING! A lap belt worn too high can increase the risk Be sure everyone in your vehicle is in a seat A seat belt that is worn under your arm is    of injury in a collision. The seat belt forces and using a seat belt properly.
Page 281 SAFETY Lap/Shoulder Belt Operating Instructions 5. Position the shoulder belt across the shoulder and chest with minimal, if any slack so that it 1. Enter the vehicle and close the door. Sit back is comfortable and not resting on your neck. and adjust the seat.
Page 282 SAFETY Adjustable Upper Shoulder Belt Anchorage NOTE: First Row Center Seat Belt Operating The adjustable upper shoulder belt anchorage is Instructions (Regular Cab Only) In the driver and outboard front passenger seats, equipped with an Easy Up feature. This feature the top of the shoulder belt can be adjusted The first row center seat belt (Regular Cab only) allows the shoulder belt anchorage to be adjusted...
Page 283 SAFETY reduces the risk of sliding under the seat belt WARNING! in a collision. If the mini-latch plate and mini-buckle are not 8. Position the shoulder belt on your chest so that  properly connected when the seat belt is used it is comfortable and not resting on your neck.
Page 284 SAFETY Seat Belt Extender Seat Belts And Pregnant Women Seat Belt Pretensioner — If Equipped If a seat belt is not long enough to fit properly, even 3500 Models Only when the webbing is fully extended and the The front outboard seat belt system is equipped adjustable upper shoulder belt anchorage (if with pretensioning devices that are designed to equipped) is in its lowest position, an authorized...
Page 285 SAFETY Switchable Automatic Locking Retractors restraint is installed in a seating position that has a seat belt with this feature. Children 12 years old (ALR) — If Equipped and under should always be properly restrained in The seat belts in the passenger seating positions the rear seat of a vehicle with a rear seat.
Page 286: Supplemental Restraint Systems (Srs)
SAFETY How To Disengage The Automatic Locking Mode The air bag system must be ready to protect you in The ORC contains a backup power supply system a collision. The Occupant Restraint Controller that may deploy the air bag system even if the Unbuckle the combination lap/shoulder belt and (ORC) monitors the internal circuits and battery loses power or it becomes disconnected...
Page 287 SAFETY NOTE: comes on intermittently or remains on while driving WARNING! If the speedometer, tachometer, or any engine have an authorized dealer service the vehicle immediately Ú page 94. related gauges are not working, the Occupant Being too close to the steering wheel or instru- ...
Page 288 SAFETY The first stage inflator is triggered immediately Seat belts are necessary for your protection in all WARNING! during an impact that requires air bag deployment. collisions, and also are needed to help keep you in A low energy output is used in less severe position, away from an inflating air bag.
Page 289 SAFETY Supplemental Side Air Bags When the SAB deploys, it opens the seam on the outboard side of the seatback’s trim cover. The Supplemental Seat-Mounted Side Air Bags inflating SAB deploys through the seat seam into (SABs) — If Equipped the space between the occupant and the door.
Page 290 SAFETY deploys the left Side Air Bags only and a right-side WARNING! WARNING! impact deploys the right Side Air Bags only. Vehicle damage by itself is not a good indicator of whether Do not mount equipment, or stack luggage or Seat belts (and child restraints where appro- ...
Page 291 SAFETY NOTE: Air Bag System Components If you do have a collision which deploys the air Air bag covers may not be obvious in the interior bags, any or all of the following may occur: NOTE: trim, but they will open during air bag deployment. The air bag material may sometimes cause ...
Page 292 SAFETY NOTE: Turn on the interior lights, which remain on as  WARNING! long as the battery has power or for 15 minutes After an accident, remember to place the ignition from the intervention of the Enhanced Accident to the STOP (OFF/LOCK) position and remove the Deployed air bags and seat belt pretensioners Response System.
Page 293: Child Restraints
SAFETY Maintaining Your Air Bag System Event Data Recorder (EDR) To read data recorded by an EDR, special equipment is required, and access to the vehicle or This vehicle is equipped with an event data recorder WARNING! the EDR is needed. In addition to the vehicle (EDR).
Page 294 SAFETY There are different sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to make sure you have the correct seat for your child. Carefully read and follow all the instructions and warnings in the child restraint Owner’s Manual and on all the labels attached to the child restraint.
Page 295 SAFETY Infant And Child Restraints Older Children And Child Restraints WARNING! Safety experts recommend that children ride Children who are two years old or who have Never install a rear-facing child restraint in the  rear-facing in the vehicle until they are two years outgrown their rear-facing convertible child seat front seat of a vehicle.
Page 296 SAFETY Children Too Large For Booster Seats If the answer to any of these questions was “no”, WARNING! then the child still needs to use a booster seat in Children who are large enough to wear the this vehicle. If the child is using the lap/shoulder After a child restraint is installed in the ...
Page 297 SAFETY Recommendations For Attaching Child Restraints Use Any Attachment Method Shown With An “X” Below Combined Weight of Restraint Type the Child + Child LATCH – Lower Anchors LATCH – Lower Anchors Seat Belt + Top Tether Seat Belt Only Restraint Only + Top Tether Anchor...
Page 298 SAFETY LATCH Positions For Installing Child Restraints In This Vehicle Crew Cab 60/40 Split Bench LATCH Positions Crew Cab Full Bench LATCH Positions Lower Anchorage Symbol (2 Anchorages Per Lower Anchorage Symbol (2 Anchorages Per Seating Position) Seating Position) Regular Cab LATCH Positions Top Tether Anchorage Symbol Top Tether Anchorage Symbol Top Tether Anchorage Symbol...
Page 299 SAFETY Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight What is the weight limit (child’s weight + weight of the child of the child and the child restraint is 65 lbs (29.5 kg). Use the restraint) for using the LATCH anchorage system to attach the 65 lbs (29.5 kg) seat belt and tether anchor instead of the LATCH system once...
Page 300 SAFETY Locating The LATCH Anchorages — Crew Cab Only The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Page 301 SAFETY Center Seat LATCH Always follow the directions of the child restraint 4. If the child restraint has a tether strap, connect it to the top tether anchorage. See manufacturer when installing your child restraint. Regular Cab or Crew Cab Full Bench Rear Seat: No Not all child restraint systems will be installed as Ú...
Page 302 SAFETY pulled back into the retractor. The cinching latch WARNING! WARNING! plate is designed to hold the lap portion of the seat belt tight when webbing is pulled tight and straight Improper installation of a child restraint to the Follow the child restraint manufacturer’s ...
Page 303 SAFETY Crew Cab Automatic Locking Retractor (ALR) Locations Cinching Latch plate — Cinching Latch plate ALR — Switchable Automatic Locking Retractor Top Tether Anchorage Symbol Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight of the child Always use the tether anchor when using the seat belt to Weight limit of the Child restraint) for using the Tether Anchor with the seat belt to attach...
Page 304 SAFETY Installing A Child Restraint With A For Regular Cab Models 8. If the child restraint has a top tether strap and the seating position has a top tether Switchable Automatic Locking Retractor Place the child seat in the center of the seating anchorage, connect the tether strap to the position.
Page 305 SAFETY 1. Place the child seat in the center of the 6. Test that the child restraint is installed tightly Installing Child Restraints Using The Top by pulling back and forth on the child seat at seating position. If the second row seat can Tether Anchorage be reclined, you may recline the seat and/or the belt path.
Page 306 SAFETY Right Or Left Outboard Seats: Regular Cab Trucks: 2. Route the tether strap to provide the most direct path between the anchorage and the In the regular cab truck, the top tether 1. Raise the head restraint and reach between child seat.
Page 307 SAFETY 2. Place a child restraint on the seat and adjust Center Seat: the tether strap so that it will reach over the 1. Raise the head restraint and reach between seat back, under the head restraint, through the rear seat and rear glass to access the the tether strap loop behind the seat and over tether strap loop.
Page 308 SAFETY 3. Pass the tether strap hook under the head 5. Tighten the tether straps according to the child restraint behind the child seat, though the seat manufacturer’s instructions, tightening tether strap loop behind the seat and over to the right and left tether straps before the the right or left outboard tether strap loop.
Page 309: Safety Tips
SAFETY SAFETY TIPS Air Bag Warning Light RANSPORTING The Air Bag Warning Light will turn on for Air Bags deploying in the front seat could harm RANSPORTING ASSENGERS four to eight seconds as a bulb check your pet. An unrestrained pet will be thrown about when the ignition switch is first placed in and possibly injured, or injure a passenger during NEVER TRANSPORT PASSENGERS IN THE CARGO...
Page 310 SAFETY Floor Mat Safety Information WARNING! WARNING! Always use floor mats designed to fit your vehicle. ONLY install floor mats designed to fit your NEVER place any objects under the floor mat   Only use a floor mat that does not interfere with the vehicle.
Page 311: Periodic Safety Checks You Should Make Outside The Vehicle
SAFETY The best protection against carbon monoxide entry ERIODIC AFETY HECKS HOULD XHAUST into the vehicle body is a properly maintained UTSIDE EHICLE engine exhaust system. WARNING! Tires Whenever a change is noticed in the sound of the Exhaust gases can injure or kill. They contain exhaust system, when exhaust fumes can be Examine tires for excessive tread wear and uneven carbon monoxide (CO), which is colorless and...
Page 312: Carbon Monoxide Warnings
SAFETY ARBON ONOXIDE ARNINGS WARNING! Carbon monoxide (CO) in exhaust gases is deadly. Follow the precautions below to prevent carbon monoxide poisoning: Do not inhale exhaust gases. They contain  carbon monoxide, a colorless and odorless gas, which can kill. Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
Page 313: In Case Of Emergency
IN CASE OF EMERGENCY HAZARD WARNING FLASHERS Push the button to turn on the Hazard Warning Flashers. When the button is activated, all The Hazard Warning Flashers button is located on directional turn signals will flash on and off to warn the upper switch bank just below the radio.
Page 314: Assist And Sos System - If Equipped
IN CASE OF EMERGENCY ASSIST AND SOS SYSTEM — IF EQUIPPED NOTE: Your vehicle may be transmitting data as autho-  NOTE: rized by the subscriber Ú page 412. Depending on the vehicles trim level, the overhead The SOS and ASSIST buttons will only function if ...
Page 315 IN CASE OF EMERGENCY SOS Call 4. You should be able to speak with the SOS ring in the vehicle. The vehicle’s SOS Call operator through the vehicle audio system to system will attempt to remain connected 1. Push the SOS Call button on the overhead determine if additional help is needed.
Page 316 IN CASE OF EMERGENCY If the SOS Call system detects a malfunction, any Even if the SOS Call system is fully functional, WARNING! of the following may occur at the time the factors beyond FCA US LLC’s control may prevent malfunction is detected, and at the beginning of or stop the SOS Call system operation.
Page 317: Jacking And Tire Changing
IN CASE OF EMERGENCY Changes or modifications not expressly  WARNING! WARNING! approved by the party responsible for compli- ance could void the user's authority to operate ALWAYS obey traffic laws and pay attention to Never start or run the engine while the vehicle ...
Page 318: Preparations For Jacking
IN CASE OF EMERGENCY REPARATIONS ACKING WARNING! 1. Park the vehicle on a firm, level surface. Avoid Apply the parking brake firmly and set the  ice or slippery areas. transmission in PARK. Block the wheel diagonally opposite the wheel WARNING! ...
Page 319 IN CASE OF EMERGENCY Before raising the wheel off the ground, make sure that the jack will not damage surrounding truck parts and adjust the jack position as re- quired. 4. Raise the vehicle until the wheel just clears the surface.
Page 320: To Stow The Flat Or Spare - If Equipped
IN CASE OF EMERGENCY Dual wheel models require a special heavy-duty lug wheel nut just previously tightened until final WARNING! nut tightening adapter (included with the vehicle) torque is achieved Ú page 397. to correctly tighten the lug nuts. Also, when it is A loose tire or jack thrown forward in a collision —...
Page 321: Jump Starting
IN CASE OF EMERGENCY JUMP STARTING If your vehicle has a discharged battery, it can be jump started using a set of jumper cables and a battery in another vehicle, or by using a portable battery booster pack. Jump starting can be dangerous if done improperly, so please follow the procedures in this section carefully.
Page 322: Preparations For Jump Start
IN CASE OF EMERGENCY NOTE: REPARATIONS TART WARNING! 1. Apply the parking brake, shift the automatic The battery in your vehicle is located in the front of Do not allow vehicles to touch each other as this transmission into PARK and turn the ignition the engine compartment, behind the left headlight could establish a ground connection and OFF.
Page 323 IN CASE OF EMERGENCY Connecting The Jumper Cables 6. Once the engine is started, follow the discon- necting procedure below. 1. Connect the positive (+) end of the jumper cable to the positive (+) post of the discharged Disconnecting The Jumper Cables vehicle.
Page 324: If Your Engine Overheats
IN CASE OF EMERGENCY IF YOUR ENGINE OVERHEATS GEAR SELECTOR OVERRIDE WARNING! In any of the following situations, you can reduce 6–S You or others can be badly burned by hot engine PEED RANSMISSION the potential for overheating by taking the coolant (antifreeze) or steam from your radiator.
Page 325: Manual Park Release
IN CASE OF EMERGENCY MANUAL PARK RELEASE 8–S PEED RANSMISSION WARNING! Always secure your vehicle by fully applying the parking brake before activating the Manual Park Release. In addition, you should be seated in the driver’s seat with your foot firmly on the brake pedal when activating the Manual Park Release.
Page 326: Freeing A Stuck Vehicle
IN CASE OF EMERGENCY NOTE: 5. While holding the locking tab in the disengaged position, pull the tether strap to For trucks equipped with an 8–speed transmis-  rotate the lever rearward, until it locks in place sion, shifts between DRIVE and REVERSE can pointing towards the driver's seat.
Page 327: Towing A Disabled Vehicle
IN CASE OF EMERGENCY CAUTION! Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the engine to idle with the transmission in NEUTRAL for  at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of transmission failure during prolonged efforts to free a stuck vehicle.
Page 328: Two-Wheel Drive Models
IN CASE OF EMERGENCY Proper towing or lifting equipment is required to (with the rear wheels on the ground) under the HEEL RIVE ODELS prevent damage to your vehicle. Use only tow bars following conditions: FCA US LLC recommends towing with all wheels and other equipment designed for this purpose, The transmission must be in NEUTRAL ...
Page 329: Emergency Tow Hooks - If Equipped
IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM — NOTE: MERGENCY OOKS For off-road recovery, it is recommended to use QUIPPED (EARS) both of the front tow hooks to minimize the risk of damage to the vehicle. Your vehicle may be equipped with emergency tow This vehicle is equipped with an Enhanced hooks.
Page 330: Servicing And Maintenance
SERVICING AND MAINTENANCE SCHEDULED SERVICING — GASOLINE An authorized dealer will reset the oil change Once A Month Or Before A Long Trip: indicator message after completing the scheduled Check engine oil level.  ENGINE oil change. If a scheduled oil change is performed Check windshield washer fluid level.
Page 331: Maintenance Plan - Gasoline Engine
SERVICING AND MAINTENANCE – G AINTENANCE ASOLINE NGINE Refer to the maintenance plan on the following pages for required maintenance. More frequent maintenance may be needed in severe conditions, such as dusty areas and very short trip driving. In some extreme conditions, additional maintenance not specified in the maintenance schedule may be required. At Every Oil Change Interval As Indicated By Oil Change Indicator System: Change oil and filter.
Page 332 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 333 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Inspect the transfer case fluid, change for any of the following: police, taxi, fleet, or frequent trailer towing. Change the transfer case fluid. Inspect and replace PCV valve if necessary. 1.
Page 334: Scheduled Servicing - Diesel Engine
SERVICING AND MAINTENANCE SCHEDULED SERVICING — DIESEL ENGINE — At Each Oil Change HANGE NDICATOR YSTEM Change the engine oil filter.  IESEL NGINE CAUTION! Inspect the exhaust system.  Your vehicle is equipped with an engine oil change Failure to perform the required maintenance Check the tire inflation pressures and look for ...
Page 335: Perform Service Indicator - Diesel Engine
SERVICING AND MAINTENANCE — NOTE: If models configured with optional B20 capability ERFORM ERVICE NDICATOR are operated with greater than 5% levels of Under no circumstances should oil change inter-  IESEL NGINE biodiesel, the oil change interval must not exceed vals exceed 15,000 miles (24,000 km) or 12,500 miles (20,000 km) or 400 hours, Your vehicle will require emissions maintenance at...
Page 336: Maintenance Plan - Diesel Engine
SERVICING AND MAINTENANCE — D AINTENANCE IESEL NGINE Inspection and service should also be performed anytime a malfunction is observed or suspected. Retain all receipts. Mileage or time passed (whichever comes first): Or Months: 18 24 36 42 54 60 72 78 90 96 102 108 114 120 Or Kilometers:...
Page 337 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: 18 24 36 42 54 60 72 78 90 96 102 108 114 120 Or Kilometers: Inspect the front suspension, tie rod ends and boot seals for cracks or leaks and all parts for damage, wear, improper looseness or end play;...
Page 338 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: 18 24 36 42 54 60 72 78 90 96 102 108 114 120 Or Kilometers: Inspect the front and rear axle surfaces. If gear oil leakage is suspected, check the fluid level.
Page 339 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first): Or Months: 18 24 36 42 54 60 72 78 90 96 102 108 114 120 Or Kilometers: Replace Crankcase Ventilation Filter (CCV). Flush and replace power steering fluid. Flush and replace engine coolant. *** 1.
Page 340: Engine Compartment
SERVICING AND MAINTENANCE ENGINE COMPARTMENT 6.4L G ASOLINE NGINE 1 — Engine Coolant Pressure Cap 6 — Engine Air Cleaner Filter 2 — Engine Oil Fill 7 — Power Steering Reservoir Cap 3 — Engine Oil Dipstick 8 — Power Distribution Center (Fuses) 4 —...
Page 341: L Diesel Engine
SERVICING AND MAINTENANCE 6.7L D IESEL NGINE 1 — Battery 7 — Brake Fluid Reservoir Cap 2 — Engine Coolant Pressure Cap 8 — Battery 3 — Engine Coolant Pressure Reservoir 9 — Power Distribution Center (Fuses) 4 — Engine Oil Fill 10 —...
Page 342: Checking Oil Level
SERVICING AND MAINTENANCE HECKING EVEL DDING ASHER LUID AINTENANCE ATTERY To ensure proper engine lubrication, the engine oil The fluid reservoir is located under the hood and Your vehicle is equipped with a maintenance-free must be maintained at the correct level. Check the should be checked for fluid level at regular battery.
Page 343: Pressure Washing
SERVICING AND MAINTENANCE VEHICLE MAINTENANCE NGINE CAUTION! Engine Oil Selection— Gasoline Engine An authorized dealer has the qualified service It is essential when replacing the cables on  personnel, special tools, and equipment to the battery that the positive cable is attached Use only the manufacturer's recommended fluid perform all service operations in an expert to the positive post and the negative cable is...
Page 344: Engine Oil Filter
SERVICING AND MAINTENANCE American Petroleum Institute (API) Synthetic Engine Oils varies considerably. Only high quality Mopar® certified filters should be used. Approved Engine Oil Your engine was designed for synthetic engine oils, only use synthetic API approved engine oils. NGINE LEANER ILTER These symbols mean that the oil has been certified...
Page 345 SERVICING AND MAINTENANCE Engine Air Cleaner Filter Inspection And 2. Lift the engine air cleaner filter cover to access 3. Tighten the fasteners (six) on the engine air the engine air cleaner filter. cleaner filter assembly. Replacement— Gasoline Engine 3. Remove the engine air cleaner filter from the Inspect engine air cleaner filter for dirt and or Engine Air Cleaner Filter Inspection and housing assembly.
Page 346: Air Conditioner Maintenance
SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling 3. Remove the engine air cleaner filter from the ONDITIONER AINTENANCE housing assembly. R-134a — If Equipped For best possible performance, your air conditioner R-134a Air Conditioning Refrigerant is a Hydrofluo- should be checked and serviced by an authorized rocarbon (HFC) that is an ozone-friendly dealer at the start of each warm season.
Page 347 SERVICING AND MAINTENANCE Cabin Air Filter Replacement For the proper maintenance intervals Ú page 329. WARNING! Do not remove the cabin air filter while the vehicle is running, or while the ignition is in the ACC or ON/RUN mode. With the cabin air filter removed and the blower operating, the blower can contact hands and may propel dirt and debris into your eyes, resulting in personal injury.
Page 348: Accessory Drive Belt Inspection
SERVICING AND MAINTENANCE NOTE: the filter cover, press on each end until you hear an audible click. Ensure the glove compartment door hinges and glove compartment travel stops are fully engaged. CAUTION! 9. Reattach the glove compartment tension tether by inserting the tether clip in the glove The cabin air filter is identified with an arrow to compartment and sliding the clip away from indicate airflow direction through the filter.
Page 349: Draining Fuel/Water Separator Filter
SERVICING AND MAINTENANCE along a rib (not across) are not normal. Any belt Noise (objectionable squeal, squeak, or rumble If water is detected in the water separator while the  with cracks running along a rib must be replaced. is heard or felt while drive belt is in operation) engine is running, or while the ignition switch is in Also have the belt replaced if it has excessive wear, the ON position, the “Water In Fuel Indicator Light”...
Page 350: Engine Mounted Fuel Filter Replacement
SERVICING AND MAINTENANCE station, or government agency for advice on recy- The sensor drain should not be overtightened cling programs and for where used fluids and during normal service operations to avoid internal filters can be properly disposed of in your area. damage and future fuel leaks.
Page 351 SERVICING AND MAINTENANCE 1. Ensure engine is turned off. 11. Install lid onto housing and tighten to 22.5 ft lb CAUTION! (30.5 N.m). Do not overtighten the lid. 2. Place drain pan under the fuel filter drain hose. Diesel fuel will damage blacktop paving ...
Page 352: Priming If The Engine Has Run Out Of Fuel
SERVICING AND MAINTENANCE NOTE: 8. Install new o-ring back into ring groove on the 3. Start the engine using the “Normal Starting” filter housing and lubricate with clean engine procedure Ú page 108. A maximum blend of 5% biodiesel, meeting ...
Page 353: Diesel Exhaust Fluid (Def)
SERVICING AND MAINTENANCE the EPA Heavy Duty Diesel Engine Emissions protect against rust and wear. Prior to the WARNING! Standards. These systems are seamlessly application of any lubricant, the parts concerned integrated into your vehicle and managed by the should be wiped clean to remove dust and grit; A hot exhaust system can start a fire if you park Cummins®...
Page 354 SERVICING AND MAINTENANCE NOTE: Wiper Blade Removal/Installation 2. To disengage the wiper blade from the wiper arm, flip up the locking tab. Life expectancy of wiper blades varies depending CAUTION! on geographical area and frequency of use. Poor performance of blades may be present with chat- Do not allow the wiper arm to spring back tering, marks, water lines or wet spots.
Page 355: Exhaust System
SERVICING AND MAINTENANCE 3. Tilt the lower end of the wiper blade away from 4. Slide the wiper blade up into the hook on the wiper arm until it is latched (engagement will the arm and with one finger, push the release tab toward the wiper arm.
Page 356: Cooling System
SERVICING AND MAINTENANCE To minimize the possibility of catalytic converter WARNING! CAUTION! damage: Exhaust gases can injure or kill. They contain Damage to the catalytic converter can result if   Do not interrupt the ignition when the transmis-  carbon monoxide (CO), which is colorless and your vehicle is not kept in proper operating sion is in gear and the vehicle is in motion.
Page 357 SERVICING AND MAINTENANCE Cooling System — Drain, Flush And Refill drained, flushed, and refilled with fresh OAT WARNING! coolant (conforming to MS.90032), by an autho- NOTE: rized dealer as soon as possible. When working near the radiator cooling fan,  Some vehicles require special tools to add coolant disconnect the fan motor lead or turn the igni- Do not use water alone or alcohol-based engine...
Page 358 SERVICING AND MAINTENANCE Please review these recommendations for using Some vehicles require special tools to add  WARNING! Organic Additive Technology (OAT) engine coolant coolant properly. Failure to fill these systems that meets the requirements of the manufacturer properly could lead to severe internal engine Do not open a hot engine cooling system.
Page 359: Charge Air Cooler - Inter-Cooler
SERVICING AND MAINTENANCE — I Checking Coolant Level — 6.4L Engine Do not overfill the coolant expansion bottle. HARGE OOLER NTER OOLER  Check the coolant freeze point in the radiator The level of the coolant in the pressurized coolant ...
Page 360: Brake System
SERVICING AND MAINTENANCE RAKE YSTEM WARNING! WARNING! In order to ensure brake system performance, all Use only manufacturer's recommended brake Do not allow petroleum based fluid to contam-   brake system components should be inspected fluid Ú page 407. Using the wrong type of inate the brake fluid.
Page 361 SERVICING AND MAINTENANCE Fluid Level Check — 8-Speed Transmission Use the following procedure to check the reference holes on the dipstick at normal operating temperature. If the fluid level is low, transmission fluid level properly: The fluid level is preset at the factory and does not add fluid through the dipstick tube to bring it to 1.
Page 362: Rear Axle And 4X4 Front Driving Axle Fluid Level
SERVICING AND MAINTENANCE NOTE: Fluid And Filter Changes — 6-Speed RONT RIVING If it is necessary to check the transmission below Transmission LUID EVEL the operating temperature, the fluid level should For the proper maintenance intervals Ú page 329. be between the two COLD (lower) holes on the For normal service, periodic fluid level checks are In addition, change the fluid and filters if the fluid dipstick with the fluid at 68-86°F / 20-30°C.
Page 363: Transfer Case
SERVICING AND MAINTENANCE Drain And Refill Limited-Slip Differentials DO REQUIRE limited slip Noise Regulations. These vehicles can be oil additive (friction modifiers). identified by the Noise Emission Control Label On 4500/5500 vehicles, remove the lower bolt to located in the operator's compartment. NOTE: drain the axle fluid.
Page 364 SERVICING AND MAINTENANCE Tampering With Noise Control System Exhaust System ENGINE COOLING SYSTEM Prohibited Inspect the entire exhaust system for leaks and Removal or rendering inoperative the fan clutch.  damaged parts. Devices such as hangers, clamps, Federal law prohibits the following acts or the Removal of the fan shroud.
Page 365 SERVICING AND MAINTENANCE Maintenance Log and Service Chart (Diesel Engines) Noise Systems Maintenance Chart and Service Log — Insert Month, Day, Year under column mileage closest to the mileage at which service was performed. MILES 7,500 15,000 22,500 30,000 37,500 45,000 52,500 60,000...
Page 366: Fuses
SERVICING AND MAINTENANCE Power Distribution Center The fuses protect electrical systems against USES excessive current. The Power Distribution Center is located in the General Information When a device does not work, you must check the engine compartment near the battery. This center fuse element inside the blade fuse for a break/ contains cartridge fuses, micro fuses, relays, and WARNING!
Page 367 SERVICING AND MAINTENANCE Power Distribution Center Location Cavity Cartridge Fuse Micro Fuse Description * If Equipped – – Spare 60 Amp Yellow – ABS Pump Mtr 60 Amp Yellow – Rad Fan HI/Lo * 50 Amp Red – 400W Inverter...
Page 368 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped 40 Amp Green – Air Suspension Comp 40 Amp Green – STOM 40 Amp Green – Starter Solenoid 20 Amp Blue – NOX Sensor * 40 Amp Green –...
Page 369 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped 30 Amp Pink – CBC #1 / Int Light 30 Amp Pink – Driver Door Mod 30 Amp Pink – FT Wiper – – Spare – – Spare 20 Amp Blue –...
Page 370 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – 15 Amp Blue Heated Strng Wheel * – 10 Amp Red Diagnostic Port – – Spare – 10 Amp Red Upfitters Relay Coils * – – Spare –...
Page 371 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – 20 Amp Yellow Ignition Coils / CAPS – 25 Amp Clear Fuel Injectors – – Spare Sunroof / USB Rear * / Inside Rearview Mirror / Passenger –...
Page 372 SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped – 10 Amp Red SCCM / Cruise control – – Spare – 15 Amp Blue ASBM / HVAC / ICS / Heated Seats SW – 10 Amp Red ORC (Airbag) –...
Page 373: Bulb Replacement
SERVICING AND MAINTENANCE Cavity Cartridge Fuse Micro Fuse Description * If Equipped F101 – 20 Amp Yellow RR HTD ST Right * F102 – 20 Amp Yellow RR HTD ST Left / Run RLY #3 * F103 – 10 Amp Red HeadLamp AFLS * F104 –...
Page 374 SERVICING AND MAINTENANCE Exterior Bulbs Bulb Name Bulb Number Low Beam (Halogen Reflector Headlamp) H11LL High Beam (Halogen Reflector Headlamp) 9005LL Low & High Beam (LED Reflector Headlamp) LED (Serviced at an authorized dealer) Low & High Beam (LED Projector Headlamp) LED (Serviced at an authorized dealer) Turn Signal / Front Position (Halogen Reflector Headlamp) 7444NA...
Page 375 SERVICING AND MAINTENANCE Replacing Exterior Bulbs 4. Reach through the access hole of the wheel 6. Rotate the bulb counterclockwise a quarter turn to unlock the bulb from the lamp. house splash shield and disengage the bulb BASE QUAD: LOW BEAM HEADLAMP, HIGH access cover by rotating counterclockwise.
Page 376 SERVICING AND MAINTENANCE 5. Disconnect the internal lamp wiring harness of the lamp can be gained through this access 5. Pull the socket and bulb straight out from the connector from the high beam bulb. hole. housing. 6. Separate the bulb from the socket without CAUTION! twisting.
Page 377 SERVICING AND MAINTENANCE 4. Pull the bulb straight out from the housing. 2. Separate the connector holding the housing Outside Bulbs: Cargo Lamps  and wiring harness to the body. 5. Reverse the procedure to install the bulb and Inside Bulb: Center High Mounted Stop ...
Page 378: Tires
SERVICING AND MAINTENANCE Tire Markings NOTE: 2. Rotate the bulb socket a quarter turn and pull it from the lamp assembly. P (Passenger) — Metric tire sizing is based on US  design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designation.
Page 379 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
Page 380 SERVICING AND MAINTENANCE EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: XL = Extra load (or reinforced) tire, or  LL = Light load tire or ...
Page 381 SERVICING AND MAINTENANCE EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) 01 means the year 2001  Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could ...
Page 382 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed on vehicle. the driver’s side B-pillar or the rear edge of the driver's side door.
Page 383 SERVICING AND MAINTENANCE (4) The resulting figure equals the To determine the maximum loading conditions of Metric Example For Load Limit your vehicle, locate the statement “The combined available amount of cargo and luggage For example, if “XXX” amount equals 635 kg and weight of occupants and cargo should never load capacity.
Page 384 SERVICING AND MAINTENANCE WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them.
Page 385: Tires - General Information
SERVICING AND MAINTENANCE — G Tread Wear IRES ENERAL NFORMATION WARNING! Improper cold tire inflation pressures can cause Tire Pressure Unequal tire pressures can cause steering  abnormal wear patterns and reduced tread life, problems. You could lose control of your Proper tire inflation pressure is essential to the resulting in the need for earlier tire replacement.
Page 386 SERVICING AND MAINTENANCE Tire Pressures For High Speed Operation Inflation pressures specified on the placard are Tire Repair always “cold tire inflation pressure”. Cold tire If your tire becomes damaged, it may be repaired if The manufacturer advocates driving at safe inflation pressure is defined as the tire pressure it meets the following criteria: speeds and within posted speed limits.
Page 387 SERVICING AND MAINTENANCE condition, please replace the TPMS sensor as it is Tread Wear Indicators Life Of Tire not designed to be reused when driven under Run Tread wear indicators are in the original equipment The service life of a tire is dependent upon varying Flat mode 14 psi (96 kPa) condition.
Page 388: Tire Types
SERVICING AND MAINTENANCE Keep dismounted tires in a cool, dry place with as WARNING! CAUTION! little exposure to light as possible. Protect tires from contact with oil, grease, and gasoline. Do not use a tire, wheel size, load rating, or Replacing original tires with tires of a different ...
Page 389: Spare Tires - If Equipped
SERVICING AND MAINTENANCE Summer tires do not contain the all season Snow tires generally have lower speed ratings than Spare Tire Matching Original Equipped Tire designation or mountain/snowflake symbol on the what was originally equipped with your vehicle and And Wheel — If Equipped tire sidewall.
Page 390 SERVICING AND MAINTENANCE Full Size Spare — If Equipped Do not install a wheel cover or attempt to mount a Since this tire has limited tread life, the original conventional tire on the compact spare wheel, equipment tire should be repaired (or replaced) The full size spare is for temporary emergency use since the wheel is designed specifically for the and reinstalled on your vehicle at the first...
Page 391: Wheel And Wheel Trim Care
SERVICING AND MAINTENANCE a stiff brush. They can damage the wheel’s NOTE: WARNING! protective coating that helps keep them from If you intend parking or storing your vehicle for an corroding and tarnishing. Limited use spares are for emergency use only. extended period after cleaning the wheels with wheel cleaner, drive your vehicle and apply the Installation of this limited use spare tire affects...
Page 392: Snow Traction Devices
SERVICING AND MAINTENANCE RACTION EVICES Use of traction devices require sufficient tire-to-body clearance. Due to limited clearance, the following snow traction devices are recommended. Follow these recommendations to guard against damage: Snow traction device must be of proper size for the tire, as recommended by the snow traction device manufacturer. ...
Page 393: Tire Rotation Recommendations
SERVICING AND MAINTENANCE For the proper maintenance intervals Ú page 329. CAUTION! CAUTION! More frequent rotation is permissible if desired. The reasons for any rapid or unusual wear should To avoid damage to your vehicle or tires, observe Observe the traction device manufacturer’s ...
Page 394: Department Of Transportation
SERVICING AND MAINTENANCE DEPARTMENT OF TRANSPORTATION Dual Rear Wheels occurs when the vehicle ignition status is changed from Off to On and speeds of greater UNIFORM TIRE QUALITY GRADES than 5 mph (8 km/h) are obtained and remain over 5 mph (8 km/h) for at about a 15 minute The following tire grading categories period.
Page 395: Traction Grades
SERVICING AND MAINTENANCE variations in driving habits, service under controlled conditions on a steps to minimize the drain on your vehicle's battery: practices, and differences in road specified indoor laboratory test wheel. characteristics and climate. Disconnect the negative cable from battery. ...
Page 396: Body And Underbody Maintenance
SERVICING AND MAINTENANCE What Causes Corrosion? Special Care RESERVING ODYWORK Corrosion is the result of deterioration or removal If you drive on salted or dusty roads or if you  Washing of paint and protective coatings from your vehicle. drive near the ocean, hose off the undercarriage Wash your vehicle regularly.
Page 397: Interiors
SERVICING AND MAINTENANCE INTERIORS For grease stains, apply Mopar® Multi-Purpose  WARNING! Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap A frayed or torn seat belt could rip apart in a EATS ABRIC ARTS...
Page 398: Leather Surfaces
SERVICING AND MAINTENANCE Cleaning Plastic Instrument Cluster NOTE: LASS URFACES If equipped with light colored leather, it tends to Lenses All glass surfaces should be cleaned on a regular show any foreign material, dirt, and fabric dye The lenses in front of the instruments in this basis with Mopar®...
Page 399: Technical Specifications
TECHNICAL SPECIFICATIONS VEHICLE IDENTIFICATION NUMBER (VIN) WHEEL AND TIRE TORQUE SPECIFICATIONS If either the front or rear hydraulic system loses normal braking capability, the remaining system The VIN is found on the left front corner of the Proper lug nut/bolt torque is very important to will still function with some loss of overall braking instrument panel, visible through the windshield.
Page 400 TECHNICAL SPECIFICATIONS Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or loose particles. NOTE: Dual wheels are flat mounted, center piloted. The lug nuts are a two-piece assembly. When the tires are being rotated or replaced, clean these lug nuts at the interface between the lug nut/bolt and the washer.
Page 401: Fuel Requirements- Gasoline Engine
TECHNICAL SPECIFICATIONS 6.4L E final torque in increments. Progress around the Designated TOP TIER Detergent Gasoline NGINE bolt circle, tightening the wheel nut opposite to the contains a higher level of detergents to Do not use E-85 flex fuel or ethanol blends greater wheel nut just previously tightened until final further aide in minimizing engine and than 15% in this engine.
Page 402: Do Not Use E-85 In Non-Flex Fuel
TECHNICAL SPECIFICATIONS Problems that result from using gasoline emissions, and fuel system components. Problems CAUTION! containing more than 15% ethanol (E-15) or that result from running CNG or LP are not the gasoline containing methanol are not the responsibility of the manufacturer and may void or The use of leaded gasoline is prohibited by ...
Page 403: Fuel Requirements - Diesel Engine
TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS – DIESEL ENGINE Diesel fuel is seldom completely free of water. To NOTE: prevent fuel system trouble, drain the If you accidentally fill the fuel tank with gasoline  Use good quality diesel fuel from a reputable accumulated water from the fuel/water separator on your diesel vehicle, Do not start the vehicle.
Page 404 TECHNICAL SPECIFICATIONS Fuel Oxidation Stability — Must Use Fuel Fuel In Oil Dilution — Must Adhere To comply with Oil Change requirements for vehicles operating on biodiesel blends up to B20 will result Within Six Months Of Manufacture Required Oil Change Interval in premature engine wear.
Page 405: Fluid Capacities
TECHNICAL SPECIFICATIONS FLUID CAPACITIES 6.4L GASOLINE ENGINE Metric Fuel (Approximate) Standard Rear Tank 52 Gallons 197 Liters Optional Midship Tank 22 Gallons 83 Liters Engine Oil With Filter 6.4L Engine 7 Quarts 6.6 Liters Cooling System 6.4L Engine 16.6 Quarts 15.7 Liters 6.7L DIESEL ENGINE Metric...
Page 406: Engine Fluids And Lubricants
TECHNICAL SPECIFICATIONS ENGINE FLUIDS AND LUBRICANTS 6.4L GASOLINE ENGINE Component Fluid, Lubricant, or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10–Year/150,000 Mile Engine Coolant (240,000 km) Formula OAT (Organic Additive Technology). We recommend using Mopar® API Certified SAE 0W-40 Full Synthetic Engine Oil which meets the requirements of the manufacturer Material Standard Engine Oil MS-A0921.
Page 407 TECHNICAL SPECIFICATIONS 6.7L DIESEL ENGINE Component Fluid, Lubricant, or Genuine Part We recommend using Mopar® Antifreeze/Coolant 10 Year/150,000 Mile Engine Coolant (240,000 km) Formula OAT (Organic Additive Technology). In ambient temperatures above 0°F (-18°C), we recommend using 10W-30 engine oil such as Mopar®, Shell Rotella and Shell Rimula that meets the manufacturer Material Standard MS-10902 and the API CK-4 engine oil category is required.
Page 408 TECHNICAL SPECIFICATIONS Component Fluid, Lubricant, or Genuine Part Use good quality diesel fuel from a reputable supplier in your vehicle. Federal law requires that you must fuel this vehicle with Ultra Low Sulfur Highway Diesel fuel (15 ppm Sulfur maximum) and prohibits the use of Low Sulfur Highway Diesel fuel (500 ppm Sulfur maximum) to avoid damage to the emissions control system.
Page 409: Chassis Fluids And Lubricants
TECHNICAL SPECIFICATIONS CAUTION! Do not use water alone or alcohol-based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be  compatible with the radiator engine coolant and may plug the radiator. This vehicle has not been designed for use with propylene glycol-based engine coolant (antifreeze).
Page 410 TECHNICAL SPECIFICATIONS 6.7L DIESEL ENGINE Component Fluid, Lubricant, or Genuine Part Only use Mopar® ASRC Automatic Transmission Fluid or equivalent. Failure to Automatic Transmission use the proper fluid may affect the function or performance of your transmission. Transfer Case We recommend using Mopar® BW44–44 Transfer Case Fluid. We recommend using SAE 75W-85 HD Ram GL-5 Synthetic Axle Lubricant.
Page 411: Customer Assistance
CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE IF YOU NEED ASSISTANCE Any communication to FCA US LLC’s customer center should include the following information: FOR YOUR VEHICLE FCA US LLC and its authorized dealers are vitally Owner's name and address  interested in your satisfaction.
Page 412: Mexico
CUSTOMER ASSISTANCE We appreciate that you have made a major Canadian residents with hearing difficulties that EXICO require assistance can use the special needs relay investment when you purchased the vehicle. An Av. Prolongacion Paseo de la Reforma, 1240 service offered by Bell Canada. For TTY authorized dealer has also made a major teletypewriter users, dial 711 and for Voice callers, investment in facilities, tools, and training to...
Page 413: Mopar® Parts
CUSTOMER ASSISTANCE If NHTSA receives similar complaints, it Transport Canada, Motor Vehicle Defect For French, refer to www.owners.mopar.ca/fr for further information. may open an investigation, and if it finds Investigations and Recalls at that a safety defect exists in a group of 1-800-333-0510 or go to Use this QR code to access your digital experience.
Page 414: General Information
CUSTOMER ASSISTANCE La operación de este equipo está sujeta a las Owner's Manuals 1. This device may not cause harmful interference, and siguientes dos condiciones: These Owner's Manuals have been prepared with the assistance of service and engineering 2. This device must accept any interference 1.
Page 415 INDEX ........48 Air Cleaner, Engine (Engine Air Cleaner Automatic Headlights ........... 342 ....60 Adaptive Cruise Control (ACC) (Cruise Filter) Automatic Temperature Control (ATC) ..........141 ......344 ....... 122 Control) Air Conditioner Maintenance Automatic Transmission ....355 ......344 ..........360 Adding Engine Coolant (Antifreeze) Air Conditioner Refrigerant Adding Fluid...
Page 416 ........... 394 ........ 108 Bluetooth Car Washes Cold Weather Operation ....309 ........387 Connecting To A Particular Mobile Phone Carbon Monoxide Warning Compact Spare Tire ....227 ............50 ........233 Or Audio Device After Pairing Cargo Light Connected Services ........10 ..............
Page 417 Driving Fails To Start ..........107 Daytime Running Lights ........48 Through Flowing, Rising, Or Shallow Flooded, Starting ........107 Dealer Service ..........341 Standing Water ........189 Fuel Requirements ........399 Defroster, Rear Window ........58 Dual Rear Wheels .......318 Identification ..........
Page 418 ............. 399 Ethanol ..........246 ........169 Family Alerts Filler Cap (Gas Cap) Hazard ..........347 Filters Filter Driving Through Flowing, Rising, Or ..........342 ........... 399 ....... 189 Air Cleaner Gasoline Shallow Standing Water ........61 ............99 ......311 Air Conditioning Light Hazard Warning Flashers ........
Page 419 Key Fob Programming (Remote Keyless Courtesy/Reading ........51 Idle-Up Feature ..........115 Entry) ...............17 Cruise ............102 Ignition ............18 Keyless Enter 'n Go™ ....25 Daytime Running .........48 Switch ............18 Passive Entry ..........25 Electronic Stability Program (ESP) Illuminated Entry ..........52 Keys ..............15 Indicator...
Page 420 ....... 93 ............29 ............ 403 Load Shed Battery Saver Mode Memory Capacity ......93 ............40 ............. 340 Load Shed Battery Saver On Outside Dipstick ....93 ..........38 ............ 342 Load Shed Electrical Load Reduction Rearview Disposal ....93 ..........42 ..........342 Load Shed Intelligent Battery Sensor Trailer Towing Filter...
Page 421 Power Remote Keyless Entry ........15 Distribution Center (Fuses) .......364 Radial Ply Tires ..........384 Programming Additional Key Fobs ....17 Door Locks ..........24 Radiator Cap (Coolant Pressure Cap) .. 355 Remote Sound System (Radio) Control ..213 Mirrors ............40 Radio Remote Start (Diesel) ........22...
Page 422 ...........23 ............ 387 Seat Belt Security Alarm Snow Tires ....283 ....404 ..........236 Automatic Locking Retractor (ALR) Selection Of Coolant (Antifreeze) SOS Call ......... 94 ........... 242 ........... 387 Seat Belt Reminder Send & Go Spare Tires ..........276 ........18 Seat Belts Sentry Key (Immobilizer)
Page 423 Storage, Vehicle ........60 Load Capacity ........... 380 Mirrors ............42 Store Radio Presets ........219 Pressure Monitoring System (TPMS) ..99 Tips ............182 Storing Your Vehicle ........393 Quality Grading ......... 392 Trailer And Tongue Weight ......177 Sunglasses Storage ......... 64 Radial ............
Page 424 ..........229 ......... 191 Call Controls Uconnect Settings ........231 .....25 Call Termination Customer Programmable Features Warning Lights (Instrument Cluster ........225 ......25 ............98 Cancel Command Passive Entry Programming Descriptions) .......... 211 ........410 Connecting To A Particular Mobile Phone Uconnect System Warranty Information ....227 ......
Page 427 The driver’s primary responsibility is the safe operation of the vehicle. Driving while distracted can result in loss of vehicle control, resulting in an accident and personal injury. FCA US LLC strongly recommends that the driver use extreme caution when using any device or feature that may take their attention off the road.
Page 428 Whether it is providing information about specific product features, taking a tour through your vehicle’s heritage, knowing what steps to take following an accident or scheduling your next appointment, we know you will find the app an important extension of your Ram vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go directly to the App Store or Google Play Store and enter the search keyword “ram toolbox”...

RAM Commercial CHASSIS CAB 2022 Owner's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for RAM Commercial CHASSIS CAB 2022

Summary of Contents for RAM Commercial CHASSIS CAB 2022