Edimax AR-7084A User Manual page 45

Parameter
IP Subnet Mask
Dynamic Route
Multicast
IGMP Snoop
DHCP
Parameter
DHCP
Starting IP Address
Description
Enter the Subnet Mask of the ADSL router. By default,
the Subnet Mask is 255.255.255.0.
Dynamic routing allows routing tables in routers to
change as the possible routes change. This router
supports RIP1, RIP2-B and RIP2-M protocols for
dynamic routing. After the RIP protocol is selected,
please choose the RIP direction from "None", "Both", "IN
Only" or "OUT Only".
Specify the method of transmitting data simultaneously to
many receivers. Please select "IGMP v1" or "IGMP v2"
as the multicast protocol or select "Disabled" to disable
the function.
When "IGMP Snoop" (Internet Group Management
Protocol Snoop) is enabled, the router can make
intelligent multicast forwarding decisions by examining
the contents of each frame's IP header. Without the
function, the router will broadcast the multicast packets to
each port and may create excessive traffic in the network
and degrade the performance of the network.
Description
You can enable or disable the DHCP server. By enabling
the DHCP server the router will automatically give your
LAN clients an IP address. If the DHCP is not enabled
then you'll have to manually set your LAN client's IP
addresses.
If the DHCP Server is enabled, please set the "Starting
37