Installing Batteries - HoMedics BPA-060 Manual

INSTALLING BATTERIES

1. Press down on latch and lift the battery cover to open
the battery compartment.
2. Install or replace 4 "AA " sized alkaline batteries in the
battery compartment according to the indications inside
the compartment.
3. Close the battery cover by pushing in the top end of
the battery door.
Replace the batteries if:
• The weak battery symbol appears on the display.
• Nothing appears on the display when the power is
switched on.
As the supplied batteries are for test only, they may be
discharged earlier than batteries you buy in stores.
Replace all batteries at one time (as simultaneous set).
Use only 1.5V "AA" alkaline batteries. Remove batteries
when unit is not in use for extended periods of time. Date
and time will need to be reset if batteries are removed
or replaced. Clean contacts on battery and in battery
compartment with a soft dry cloth each time you install
batteries.
Note:
Batteries are hazardous waste. Do not dispose of them
together with the household garbage.
Battery
Cover
11
USIN
This m
an op
AC ad
in this
1-800
Note:
• Wh
sure
• Ple
ada
bat
leak
• No
• Dat
unp
Conne
the ba