Advertisement
Error Messages
"ERR" will appear when an error
condition exists or the incorrect key is
pressed. Common examples include:
• Pressing ENTER during calibration before the
"READY" indicator appears. Wait for the
"READY" indicator before pressing ENTER.
• UR (Under Range).
• OR (Over Range).
Intended Use, Maintenance
& Precautions
These handheld meters use sensors to detect various
parameters for water-based measurements. For
routine maintenance disconnect the power cord or
Instrument Operating Conditions
Operating Ambient Temp.
Operating Relative Humidity
Storage Temp.
Storage Relative Humidity
Pollution
Overvoltage
Weight
Size (L x W x H)
Regulatory & Safety
Power Rating
Battery Requirement
Vibration
Shock
Enclosure (Designed To Meet)
Digital Multiparameter Meter
battery, then dust or wipe the display using a damp
cloth. If necessary, warm water or a mild water based
detergent can be used. Immediately remove any
spilled substance from contact with the meter using
the proper cleaning procedure for the type of spill.
• Do not use this equipment in potentially
explosive atmospheres.
• Refer to the electrode instructions for use,
storage and cleaning.
• Ensure that no liquid enters the instrument.
• Do not use any aggressive cleaning chemicals
(solvents or similar agents).
• There are no user serviceable parts inside. Attempts
to service internal parts may void the warranty.
• WARNING: No modification of this
equipment is allowed.
5 to 45ºC
5 to 85%, non-condensing
-20 to +60ºC
5 to 85%, non-condensing
Degree 2
Category II
500g
21.15 x 9.87 x 5.85cm
CE, TUV 3-1, FCC Class A
DC Input: 9 VDC 1 A
2 x AA (LR6) 1.5V batteries (replace batteries when battery sign blinks)
Shipping/handling per ISTA #1A
Drop test in packaging per ISTA #1A
IP67 (using rubber covers)
5
39
Advertisement
