4 Storage
3.3 Product Nameplate
The nameplate provides a unique identification of the inverter (Product type, device -specific characteristics,
certificates and approvals).
The nameplate is on the left side of the enclosure.
FIG.3-3 Inverter Nameplate (for reference)
4 Storage
The following requirements should be met when the inverters need to be stored:
Do not unpack the inverter.
Storage temperature: –40°C ~ +70°C.
Storage humidity: 0% ~ 100%RH (Non-Condensing).
The warehouse should be clean, well-ventilated, and noncorrosive gas, meanwhile it should be accessible all the time.
No smoking, no illegal use of electricity and fire.
When storing inverters, do not stack more than the allowed layers to avoid damage, which number marked on the
product packaging.
Regular inspection is required during the storage.
After long periods storage, the inverters need to be inspected and tested by technical Engineer before they are put
into use.
4 / 17