Labels On Product And Packaging; Safety Instruction; General Safety; Notice For Use - CanadianSolar CSI-7K-S22002-E User Manual

Pv inverter
Table of Contents

Advertisement

1.5.2 Labels on product and packaging

Symbol
Hot surfaces!
Risk of burns due to hot components!
Danger to life due to high voltage!
Time need to discharge stored energy in the capacitors.
Grounding
Direct Current (DC)
Alternating Current (AC)
Check the user manual before service.
CE mark.
WEEE designation.

2 Safety Instruction

2.1 General Safety

The Inverter has been designed and tested strictly according to the international safety codes, however, certain safety
precautions must be observed when installing and operating this inverter. Read and follow all the instructions,
cautions and warnings in this user manual carefully before any work and keep this manual for future reference.

2.2 Notice for Use

2.2.1 Personnel requirements

Only qualified personnel are allowed to install and commission the inverter, they should:
1) Receive professional training and get the authorization.
2) Be familiar with the safety specification about the electrical system.
3) Be familiar with the local requirements, rules and regulations.
4) Understand the composition and working principles of the grid-tied PV system.

2.2.2 Operation requirements

Use the inverter in installations that meet the following specifications only.
1) Permanent installation is required.
2) The electrical installation must meet all the applications and standards.
3) The inverter must be installed according to the instructions stated in this manual.
4) The inverter must be installed according to the correct technical specifications.
5) To startup the inverter, the Grid Main Switch (AC) must be switched on, before the solar panel's DC solar switched
on. To stop the inverter, the Grid Supply Main Switch (AC) must be switched off, before the solar panel's DC isolator
switched off.

2.2.3 Protecting labels

1) Do not scrawl or damage any labels on the inverter enclosure, because these labels contain important information
about safe operation.
2) Do not scrawl or damage the nameplate on the inverter enclosure, because the nameplate contains important
product information.
2 / 17
Description
2 Safety Instruction

Advertisement

Table of Contents
loading

This manual is also suitable for:

Csi-8k-s22002-eCsi-9k-s22002-e

Table of Contents