Related Manuals for Walker Edison W52C4D0
Summary of Contents for Walker Edison W52C4D0
- Page 1 ITEM # : W52C4D0 Assembly Instructions Please visit our website for the most current instructions, assembly tips, report damage, or request parts. www.walkeredison.com Revised 08/2017...
-
Page 2: General Assembly Guidelines
Wipe away excess glue immediately. A Phillips head screwdriver is required for the assembly of this product. VII. Power tools should not be used to assemble this product. Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved. -
Page 3: Parts List
Parts List Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved. - Page 5 Insert small dowels (B) into panels (7,8) and slat (3). Insert large dowels (A) into slat (3). Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 6 Attach slat (6) to bottom panel (4) using cam bolts and dowels as guides. Insert cam locks (E) into bottom panel (4) and tighten with a screwdriver.Screw leg (5) into bottom panel (4). Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 7 Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 8 Attach slat (3) to panels (7,8) using dowels as guides. Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 9 Attach side panel (2) to the opposite side of the assembly from Step 7 using cam bolts and dowels as guides. Insert cam locks (E) into bottom panel (4) and slats (3,6). Tighten cam locks (E) with a screwdriver. Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 10 Insert cam locks (E) into the assembly from Step 9 as shown above. Attach top panel (9) to the assembly using cam bolts and dowels as guides. Tighten cam locks (E) with a screwdriver. Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 11 Secure glass panes (16) by attaching metal washers (J) to door frames (14,15) using screws (M). The curve of metal washers (J) will arc into glass panes (16). Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 13 Insert shelf support pins (F) into the interior of the assembly at desired shelf heights. Carefully place shelves (12,13) on shelf support pins (F). Copyright © 2009, by Walker Edison Furniture Co., LLC. All rights reserved.